A182 F53 2507 special flange high alloy duplex stainless steel flanges

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

La tuberia ERW se usa en aplicaciones que requieren una soldadura extensa para la instalacion. Los usos de la tuberia duplex ASTM A790 UNS S32205 no se limitan a aplicaciones industriales, tambien se pueden ver en aplicaciones domesticas de bajo costo.

This provides the flanges with high corrosion resistance and higher mechanical properties. Please contact us for your orders of F53 flanges.

Duplex steels have the best resistance to pitting corrosion. This steel has effective fatigue strength to resist corrosion of the steel. The steel can be used in a wide range of heating temperatures in the industry.

In comparison to SS316, Duplex 2205 has been tested under reverse bending stresses at room temperature. The results show that the fatigue limit/yield strength is about twice as high for Duplex 2205.

Duplex stainless steels are approximately 50% ferrite and 50% austenite for optimum strength and corrosion resistance.

La microestructura hibrida de la tuberia Super Duplex 2507 mejora su rendimiento.

The material of the super duplex S32750 sheet has increased tensile strength and yield strength. Super Duplex Steel UNS S32750 plate has good ductility and toughness. AISI S32750 plate has good corrosion resistance compared to Duplex. The material of the super duplex steel S32750 plate has higher corrosion resistance.

Super Duplex 2507 is used in environments containing high levels of chlorides or dissolved oxygen, such as seawater cooling, salt evaporation, and desalination, geothermal wells.

The microstructure and composition of the duplex 2205 alloy provides corrosion resistance superior to Type 316 or 317 in many environments, and its minimum yield strength is more than double that of conventional austenitic stainless steels.

Super Duplex stainless steel offers the same advantages as its Duplex counterpart. The main difference between the two is that Super Duplex has a higher chromium and molybdenum content, resulting in increased corrosion resistance.

2205 helps users to avoid stress corrosion cracking that is typically seen with 316 and 317.

Duplex steel alloys have the properties of austenitic and ferritic stainless steels. This is because they have nearly equal proportions of dual microstructural phases (austenite and ferrite) in the annealed condition.

Due to the material composition, the strength and the corrosion resistance, these flanges are used in a variety of applications.

Super Duplex UNS S32750 is the most common Super Duplex grade on the market. UNS S32750 is a duplex stainless steel designed for use in corrosive chlorine-containing environments. It has very good localized corrosion and stress corrosion cracking resistance and high mechanical strength. Widely used in oil and gas, hydropower, pressure vessels, pulp and paper, structural parts and chemical tankers.

S32760 is a super duplex stainless steel with a ferritic-austenitic microstructure.

Stub ends are used with lap flanges. Metline is an ISO certified, PED approved duplex 2205 stub end manufacturer and supplier with a manufacturing base in India. We can supply both long and short ends (collars) with test certificate according to EN10204 3.1.

Supler Duplex Steel UNS S32760 stud bolt has a higher yield strength and lower ductility than the austenitic steels so fabricators may find that higher forming forces, increased radius of bending, and increased allowance for spring-back are necessary.

Duplex 2507 possesses excellent mechanical properties. Often a light gauge of 2507 material can be used to achieve the same design strength of a thicker nickel alloy.

Duplex 2205 was tested under reverse bending stress at room temperature compared to SS316. The results show that Duplex 2205 has approximately twice the fatigue limit/yield strength.

2205 Duplex nuts are the most widely used duplex stainless steel 2205 fasteners and feature a high yield strength that is twice that of standard austenitic stainless grades.

2507 (UNS S32750) is a super duplex stainless steel designed for applications requiring excellent strength and corrosion resistance.

2507 is used for oil and gas industry equipment, offshore platforms, heat exchangers, process and service water systems, fire-fighting systems, and injection and ballast water systems.

Duplex steel UNS S32205 fasteners are used in the pulp and paper industry such as digesters, bleach plants and stock handling systems. Also known as WNR 1.4462 fasteners, they are developed and designed in our infrastructure to international quality standards to the highest quality standards.

UNS S32750 ( F53 / 1.4410 / Alloy 2507) has a lower coefficient of thermal expansion and higher thermal conductivity than austenitic steel, and is suitable for operating temperatures up to 300 ℃.

Duplex 2205 alloy is composed of high chromium and low or moderate nickel conutenut.

ASTM A240 Type 2507 Duplex Sheet is an alloy used in applications with high strength and corrosion resistance. The composition of the duplex 2507 sheet is approximately 25% chromium, 7% nickel and 4% molybdenum. This composition makes it resistant to crevice corrosion and chloride pitting.

The pressure ratings of the material are designated by classes 150Lbs through 2500LBs. There are different types of the duplex f51 flanges such as the raised face, ring type joint and flat face flanges.

S32760 also has high strength and extended service life. It is 10% lighter than grade 316 steel, ideal for sub-zero use, and more cost-effective than nickel alloys. Stainless steel grade F55 can be easily machined and welded.

Duplex alloys prove themselves useful in applications where ordinary steel grades are susceptible to failure. The microstructure of the Duplex Pipe Material partially consists of both austenite and ferrite regions.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The UNS S32750 standard of Pipe Fittings consists of 25% chromium, 4% molybdenum, and 7% nickel. The UNS S32750 Pipe Fittings have a 50-50 microstructure of ferritic and austenitic steel grades with improved strength.