astm a276 stainless steel round bar

Our stainless steel round bar stock ranges from 1/8¡± to 24¡± diameter. We are the industry leader in long bar stock ranging from 20′-24′ R/L. This means we are able to supply stainless steel for projects requiring lengths longer than the industry standard 12′. The long length also provides flexibility in part length, often leaving excess scrap on the standard 12′ length.

Having said that, all four types of stainless steel are required to meet the mechanical properties specified in this specification. The properties to be tested include not only the tensile and yield strength of the A479 bar, but also the elongation and hardness properties.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

316 Stainless Steel Rod Applications: Pumps, Valves, Textile and Chemical Equipment, Pulp and Paper, and Marine Applications.

AL-6XN ? alloy (UNS N08367) is a low carbon, high purity, nitrogen containing “super austenitic” stainless steel alloy. AL-6XN alloy is designed to be a seawater resistant material and has been shown to resist a wide range of corrosive environments.

The degree of magnetic responsiveness of stainless steel is determined by its microstructure, so certain types of stainless steel alloys can be manipulated during the processing stage to make them more or less magnetic.
Generally, austenitic stainless steels are considered non-magnetic and suitable for magnetically sensitive applications, while other types of stainless steel alloys (including duplex, ferritic and martensitic) can be made with higher magnetic properties

A sharp tool is required, and the correct speed and feed are very important – taking care to ensure the cut is deep enough to clear the surface is a must, as excessive contact can harden the material.

A479 is a specification for bars and rods produced in several grades of austenitic, ferritic, duplex or simply austenitic-ferritic and martensitic stainless steels. Since this designated stainless steel A479 round bar can be produced in any of the above grades, it can be heat treated differently.

Stainless steel is not particularly ductile or ductile, certainly not heavily annealed, but quite suitable for welding. Stainless steel bars are hygienic, low maintenance and non-reactive with many substances, and importantly, this includes most foods ¨C stainless steel does not contaminate taste or color, which is why it is so commonly used in kitchen settings and cookware.

316 stainless steel round bars are ideal for most machining techniques and for indoor and outdoor applications. AISI 316 stainless steel is a non-magnetic, high-strength material with excellent corrosion resistance. 316 is slightly stronger than 303 and 304 stainless steel. Making it ideal for the food and pharmaceutical industries, as well as in areas involving marine environments, aerospace, process equipment, chemicals or other aggressive substances.

17-7PH provides high strength and hardness with minimal deformation under heat treatment. The alloy has good formability and excellent fatigue properties with good corrosion resistance.

Grade 304 is essentially an all-purpose alloy, it is tough, has good corrosion resistance and is easy to machine. The alloy also has excellent welding properties. Stainless steel round bars are fairly versatile parts and can be used in a variety of applications.

This is due to the increased hardness and tensile strength properties of cold-worked bars. In cold-worked conditions, ASME SA479 Grade 316 Round Bars may be slightly magnetic and can therefore be used in applications requiring magnetic properties. ASME SA276 Type 316 Rod Offers higher magnification not only in corrosion resistance but also in mechanical properties such as yield strength, creep strength and hardness compared to other austenitic stainless grades 304.

ASTM A479 Round Bar has one important thing going for them: they are made from stainless steel. Stainless steel is corrosion resistant and the stainless steel which has higher alloy content are able to withstand the onslaught of acids, “chlorine bearing environments” as well as solutions containing alkaline.

Magnetic Response of Stainless Steel
Magnetic response is the attractive force of steel to a magnet. Austenitic grades are generally not magnetic, although a magnetic response can be induced in low austenitic grades by cold working. High nickel grades such as 316 and 310 will remain non-magnetic even when cold worked. All other grades are magnetic.

While the chemical composition of stainless steel 304l round bars may not differ much from grade 304, this alloy has undoubtedly proven to be very useful. This low carbon ASME SA479 Type 304l round bar has been modified to increase its weldability.

Due to the molybdenum content in 316 stainless steel, this stainless steel material has excellent corrosion and heat resistance. It is resistant to various corrosive agents such as sulfuric acid, bromide, iodide and chloride, making it suitable for use in marine environments.

Industrial stainless steel bar products include several different shapes including flat, hexagonal, round and square and materials such as 304, 304l, 316, 316l and 347. These types of stainless steel bar products have enhanced corrosion resistance and are available in a variety of alloys and finishes, making them useful in an almost unlimited number of industrial applications.

Stainless steel round bar, as the name suggests, is a product made of different grades of stainless steel material. Depending on the grade of stainless steel, they can be used in various industries. These round bars have high strength, and due to their high chromium content, they are effectively resistant to corrosion.

The Stainless Steel 304 Round Bar, as the name suggests is made up of 304 grade stainless steel material. It has around 18% chromium and 8% nickel in its chemical composition. The round bar shows high resistance to corrosion and enhanced strength properties. The material is quite strong with around 515 Mpa min tensile strength and min yield strength of 205 MPa.

904l Stainless Steel Round Bar It can be categorically said that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery. Widely used in automotive, textile, manufacturing, construction, cement, shipbuilding, paper and pulp, defense, heavy earthmoving equipment or aerospace.

The benefits of using stainless steel 304/304L round bars include low carbon content, which eliminates carbon precipitation during welding. Stainless steel 304L round bars have higher tensile yield strength and have low temperature properties that respond well to cold work hardening.

Because of this resistance, some of the applications and uses of stainless steel bars are in machining, fasteners, grills and construction. The 304, 304L, and 304H may be considered to perform uniformly in most corrosive environments. Plain round bar is commonly used to separate mesh in concrete slabs and is used in a range of commercial and infrastructure applications.

ASTM is the American Society for Testing and Materials, and A479 is “Standard Specification for Stainless Steel Bars and Sections for Use in Boilers and Other Pressure Vessels.” This general supply specification defines composition and mechanical property requirements for various stainless steel bars, whether hot or cold worked, round, hexagonal or square, and hot rolled or extruded shapes such as angles, tees and channels . It also includes basic details on sampling and certification requirements, product marking and particle size requirements.

Stainless steel rods or stainless steel rods such as 304, 304l, 316, 316l and 347 are commonly used in construction due to their durability and resistance to rusting. All of our stainless steel is sourced from accredited factories and fully certified. Chemical and mechanical certifications are available upon request.

Stainless Steel 310 Round Bar is a robust austenitic stainless steel grade bar used in a variety of industries. Applications include chemical, brewing, petrochemical, food processing and many other industries. Stainless steel 310 round bars are available in different sizes according to EN, DIN, JIS, ASTM, BS, ASME and AISI codes.

Grade 316 – Second only to 304 among austenitic stainless steels, this is the standard molybdenum-containing stainless steel, which means it has better overall corrosion resistance than 304, especially pitting and corrosion commonly found in chloride environments crevice corrosion. It has excellent forming and welding characteristics.

Similar to the 304 grade, the 304L SS Hex Bar is used for applications requiring price control. Perfect Impex is one of the suppliers of cut-to-length bars in all grades, saving you additional costs. We are stainless steel 304L flat bar supplier, supplying steel bars in all finishes.

Cold-drawn stainless steel bars are cold-finished, which means they are further processed after hot rolling. The hot-rolled and cold-drawn process helps improve bar dimensional tolerances, straightness, surface appearance, and overall physical properties. These SS bars are the most accurate compared to hot rolled bars. They have a smooth surface finish.

SMO 254 round bar has good mechanical properties. The minimum tensile strength of these bars is 650Mpa and the minimum yield strength is 300Mpa. All of these bars can be stretched by 35%. They are widely used in petrochemical, offshore drilling, pharmaceutical industry, chemical industry, etc. Our agency is a leading manufacturer and supplier of SMO 254 round bars. Our goal is to produce and supply the best products at reasonable prices.