Chemical Composition stainless steel 304 304L S30400 S30403 pipe

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

SMO 254 Hallow Pipes is considered resistant to potable water with up to about 200 mg / L chlorides at ambient temperatures, reducing to about 150 mg / L at 60 Degree C.

Type : Seamless / Welded.This steel type contains as low as 0.03% of carbon content and thus reduces its susceptibility to intergranular corrosion.

We offer a complete range SS 316Ti Blind, SS 316Ti Socket Weld Flanges, SS 316Ti Blind Flanges, SS 316Ti Orifice Flanges, SS 316Ti Spectacle Blind Flanges, SS 316Ti Slip On Flanges, SS 316Ti Reducing Flanges, SS 316Ti Ring Type Joint Flanges (RTJ) SS 316Ti Weld Neck Flanges, SS 316Ti Screwed / Threaded Flanges, that are precision engineered using best quality raw material.

316 stainless steel round bar is a type of stainless steel rod that is used in a variety of applications. It has excellent corrosion resistance and a strength-to-weight ratio. In addition to its many advantages over other types of steel bars, 316 stainless steel round bar stock can withstand high temperatures without losing its shape or properties.

SAE 304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel. It is magnetic, but less magnetic than steel. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.[1]

ASTM A182 SS 321H Slip On Flanges
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

ASTM A815 UNS S32760 capis available at our company on a large-scale. The UNS S32760 standard of pipe fittings is considered one of the best in the industry due to its mechanical properties.

Aunque la aleacion 6MO es mucho mas fuerte que los grados austeniticos comunes, tambien se caracteriza por su alta ductilidad y resistencia al impacto.

Type 316 stainless steel is manufactured into another grade due to its wide range of potential and is distinguished by the use of the letter “L” in its name. L represents the low carbon content in the steel.

Grade 304/304L is resistant to atmospheric corrosion, in addition to a reasonable oxidizing and reducing environment. It has excellent resistance to intergranular corrosion in the as-welded state. ASTM A /304L Dual Grade has excellent strength and toughness at low temperatures. After cold rolling, it is subjected to hot repair, pickling or other repair, and finally cold rolling to achieve an acceptable gloss.

304 fittings are standard “18/8” stainless steel; it is the most versatile and widely used stainless steel available in a wider range of products, forms and finishes than any other. It has excellent forming and welding characteristics.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

In industries that handle nitric acid, grade 304 stainless steel threaded pipe flanges can be used at temperatures up to 176¡ãF. 304 stainless steel flanges are durable and less expensive than other alloy types. Due to the oxidizing properties of this solution, it will rapidly cause disintegration if used at concentrations above 55%.

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

Stainless steel 347 reducer has tensile strength and minimum yield strength. Stainless Steel 347 Stub End Fittings are a non-magnetic grade that cannot be hardened by heat treatment, are typically used in the annealed condition, and are known for their ease of fabrication and formability.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

304/304L stainless steel pipe is one of the most widely used stainless steel grades. It has a low carbon content and high chromium and nickel content. It is easy to draw and form, and exhibits good strength and excellent corrosion resistance, including protection against intergranular corrosion during welding.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

The 6Mo super austenitic steel combines moderate tensile strength and high ductility with excellent corrosion resistance in seawater and variety of industrial environment.

Grade 316, and grade 304, may suffer stress corrosion cracking in solutions containing chloride ions at temperatures over about 60¡ãC. Stress corrosion cracking should be considered for all corrosion services where the corrosive liquid may contain chloride.

Stainless steel round tubes, referred to interchangeably as stainless steel pipes, are used in a wide variety of commercial and domestic settings. Whether it¡¯s for an engineering, shop fitting or manufacturing project, or just a small requirement from a hobbyist, the tainless steel tubes in a variety of sizes.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

We manufacture 309 Stainless Steel Carriage Bolts under strict supervision of our professional team which guarantees the highest quality.

A flange is a ring of steel (forged, cut from plate, or rolled) designed to connect sections of pipe, or to join pipe to a pressure vessel, valve, pump or other integral flanged assembly. Flanges are joined to each other by bolts, and to the piping system by welding or threading (or loose when stub ends are used). Stainless steel flange simplified as SS flange, it refers to the flanges that made of stainless steel. Common material standards and Grades are ASTM A182 Grade F304/L and F316/L, with pressure ratings from Class 150, 300, 600 etc and to 2500. It used in more industries than carbon steel as stainless steel has better resistant performances on corrosion environment and always provides with a good appearance.

Types 304 and 316 are very common grades of stainless steel and refer to only one type of stainless steel. If you were to look for Type 304 or 316 stainless steel bolts in the ASTM Handbook of Fastener Standards, you won’t find them. This is because they are steel grades and not fastener specifications, but engineers will specify them and contractors will require them.

304 has excellent mechanical properties and is resistant to a variety of corrosive agents. 304/304L stainless steel coils and plates are part of the austenitic stainless steel family. Grade 304 has a lower carbon content than 302 and 304/304L has a lower carbon content than direct grade 304. Types 304 and 304L have very good stretchability and excellent corrosion resistance in chemical, textile, petroleum and food industry exposures.

Type 316 is much more resistant to sulfuric acid solutions than any other chromium-nickel type. Type 316 is resistant to acid concentrations up to 5% at temperatures up to 120¡ãF (49¡ãC). This type has excellent resistance to higher concentrations at temperatures below 100¡ã F (38¡ã C).

The austenitic structure of 316 stainless steel provides excellent toughness even at low temperatures.

Incoloy 925 flange provides excellent resistance to pitting and crevice corrosion.

For severely corrosive environments, lower levels of Type 304L are preferred due to its greater resistance to intergranular corrosion.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.28

Tube is manufactured in round, square and rectangular sections in a variety of wall thicknesses. It is usually manufactured by the processes of longitudinal welding, hot and cold drawing (seamless) or spiral welding. Finishes or appearance range from unpolished to highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to mirror appearance. Finishes are selected to suit application and aesthetic appeal.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20