Hastelloy C2000 Flanges Dealers ANSI B16.5 HASTELLOY C2000 FLANGES

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

A bushing is a type of bearing. Generally speaking, “bearings” facilitate movement between two components while reducing friction. Simple in design, a typical bearing has two surfaces that roll against each other, allowing the two mating parts to move without friction.

Alloy C-276 has excellent resistance to pitting corrosion, stress corrosion cracking and oxidizing atmospheres up to 1900¡ãF.

Hastelloy C22, also known as Alloy C22, is a general purpose austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. High chromium content provides good oxidation resistance, while molybdenum and tungsten content provides good reduction resistance. Hastelloy C22 alloy also has excellent resistance to oxidizing aqueous media, including wet chlorine and nitric acid-containing mixtures or oxidizing acids containing chloride ions.

Just as the name ¡°Pre-engineered¡± suggests, these s are engineered at a factory and are assembled at site.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

C-276 alloy has excellent resistance to pitting and to stress-corrosion cracking. It is also one of the few materials that withstands the corrosive effects of wet chlorine gas, hypochlorite, and chlorine dioxide.

C2000 flanges have better temperature capabilities in hydrofluoric, sulfuric, and diluted hydrochloric acids due to the addition of copper.

Plates are designed by continuous rolling and casting or, in most instances, steel is processed into a bullet then hot rolled to be shaped in its final plate thickness. Akin to steel plates, rolled ring forgings are forged in the same process ¨C it differs only in terms of rolling directions.
For cups having comparative large thickness and plates having
complicated cross-sectional shapes, plate forging is more useful than billet forging due to due to
comparatively small change in shape.

The corrosion resistance property of the alloy is credited to the addition of both Molybdenum and nickel.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Hastelloy C276 bushings have excellent resistance to strong oxidizing salt solutions such as ferric chloride and cupric chloride. Alloy C-276 has excellent phosphoric acid resistance at all temperatures below boiling point and concentrations below 65%.

Hastelloy G-30 is a high chromium nickel-base alloy which has superior corrosion resistance over most other nickel and iron-base alloys in commercial phosphoric acid as well as many complex environments containing highly oxidizing acids such as nitric/hydrochloric, nitric/hydrofluoric and sulfuric acids.

Alloy C276 (UNS N10276) is an austenitic nickel-molybdenumchromium alloy with a small addition
of tungsten.Hastelloy C-276 Alloy has excellent resistance to a wide variety of chemical process environments, including strong oxidizers such as ferric and cupric chlorides, hot contaminated media (organic and inorganic), chlorine, formic and acetic acids, acetic anhydride, and seawater and brine solutions.

Strong and Oxidation Resistant to 2200 Deg. F (1200 Deg. C) – HASTELLOY X pipe bend is a solid solution strengthened grade has good strength and oxidation resistance up to 2200 Deg. F (1200 Deg. C).

The flanges are furnished in solution heat treated circumstances, thus these are heat treated at 2150 degree F and get cooled rapidly.

Steel Plate are often used for structural and construction applications, pressure vessels, marine and offshord equipment, and military applications. The grade, elements and parameters of a steel plate are also important in how it is used.
Steel plates are classified by thickness: thin plate, medium plate, thick plate and extra-thick plate.
Thin steel plates are steel plates with a thickness between 0.2-4mm produced by hot rolling or cold rolling, and thick steel plates are those with a thickness of more than 4mm
The general name of the good board.
Thin steel plate refers to a steel plate with a thickness of not more than 3 mm. The commonly used thin steel plate thickness is 0.5-2MM, which is divided into sheet and coil supply. Thin
The steel plates are generally B-type steels, cold-rolled or hot-rolled steel plates with steel grades B0-B3. Requirements for thin steel plates: smooth, smooth surface, thick
The degree of uniformity, allowing a tight iron oxide film, must not have cracks, scarring and other defects. The process is divided into hot rolled sheet steel and cold rolled sheet
plate. Mainly used in Changlin Dongfeng fans, automobiles, electrical equipment, vehicles, agricultural machinery, containers, steel furniture, etc.
Thick steel plates refer to steel plates with a thickness greater than millimeters. Thick steel plate is divided into extra-thick steel plate and medium-thick steel plate.
Medium and heavy steel plates refer to steel plates with a thickness greater than 3 mm and less than 50 mm. Medium and thick steel plates are mainly used in shipbuilding, boilers, bridges
Armor and high-pressure vessel shells, etc.
Extra-thick steel plate refers to a steel plate with a thickness of not less than 50 mm. Extra-thick steel plates are mainly used in shipbuilding, boilers, bridges and high-pressure vessel shells
blog.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

It is used in flue gas desulfurization systems because of its excellent resistance to sulfur compounds and chloride ions encounted in most scrubbers. C 276 alloy has excellent resistance to pitting and to stress corrosion cracking. It is also one of the few materials that withstands the corrosive effects of wet chlorine gas, hypochlorite, and chlorine dioxide.

Alloy C276 is an alloy that excels in a range of corrosive environments. It is resistant to strong oxidizing chlorides, reducing acids, hot sea water and saline solutions.

G30 alloy can prevent the formation of grain boundary precipitation in the heat affected zone of welding

Hastelloy C-276 also has excellent resistance to pitting corrosion, stress corrosion cracking and oxidizing atmospheres, as well as excellent resistance to many different chemical environments.

Hastelloy B3 Socket Weld Flanges is dual-certified to meet both SS 316 and SS 316L.

These fasteners are designed according to the quality of raw materials according to national and international standards, thus ensuring their durability and high quality.

Hastelloy C22 flanges are available in different sizes and shapes. One can easily get it at their doorstep as per their specifications.

The high chromium content provides good resistance to oxidizing media while the molybdenum and tungsten content give good resistance to reducing media.

Hastelloy tubing is suitable for applications in the chemical processing, pharmaceutical, agricultural, food, petrochemical and power industries. Hastelloy piping is often specified for highly corrosive industrial applications and is often used in processes where chloride is a component.

C276 is a solid solution strengthened nickel-molybdenum-chromium alloy with a small amount of tungsten that exhibits excellent corrosion resistance in a variety of harsh environments. Applications include, but are not limited to, stack liners, pipes, dampers, scrubbers, stack gas reheaters, heat exchangers, reaction vessels, and evaporators. Industries that can use C276 include petrochemical and chemical processing, power generation, pharmaceuticals, pulp and paper, and waste treatment, to name a few.

It is commonly referred to by the tradename Hastelloy C22 and the universal designation UNS N06022. C22 has excellent corrosion and oxidation resistance, great mechanical properties over a wide range of temperatures, and good fabrication properties.