tuberias de acero inox duplex 254smo 1.4547

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

904L Stainless is the most common of the ¡°4% Molybdenum¡± alloys. It was designed to be an upgrade to 316L and Alloy 20 without incurring the expense of Alloy C276. 904L Stainless has been surpassed in popularity by the ¡°6% Molybdenum¡± alloys such as AL6XN?. Its availability in round bar is limited to metric sizes in 5mm increments. Consequently, inch-size diameter-headed bolts are relatively expensive to manufacture.

Alloy 309 (UNS S30900) is an austenitic stainless steel developed for high temperature corrosion resistant applications. The alloy resists oxidation up to 1900¡ãF (1038¡ãC) under non-cycling conditions. Frequent thermal cycling reduces oxidation resistance to approximately 1850¡ãF (1010¡ãC).

Manufactured from 304/304L or 316/316L stainless steel with milled inside and outside diameters (ID/OD). These stainless steel welded joints meet ASTM A403, ASTM A960, MSS SP-4, ASTM B16.9 (except for walls), and MSS SP-43.

The austenitic structure of 316L also gives these grades excellent toughness, even at low temperatures.

El titanio del grado 316Ti no solo reacciona con el bajo contenido de carbono para reducir el carburo de cromo en la region del limite de grano, sino que tambien act¨²a como elemento estabilizador para descartar la corrosion intergranular. Es por eso que UNS S31635 SS Codos aptos para piggable es el producto de eleccion para fertilizantes, petroleo y gas, y refinerias donde las aplicaciones de alta temperatura son rampantes y se requieren codos libres de corrosion.

316L has a lower proportion of carbon in its composition.

Our UNS S31008 SS Weld Neck Flanges are customarily applicable to the process plants. Our SS 310 Flanges are 18-8 austenitic stainless steel flanges, with their Chromium-Nickel combination being heat resistant and oxidation resistant.

Stainless Steel 321 Flange
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

Type 316 stainless steel tubing is similar to 304, but with the addition of molybdenum, which improves the alloys corrosion resistance. The austenitic structure allows excellent toughness, even down to extremely low temperatures. These grades have excellent weldability, with or without the addition of filler metal.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Stainless steel 347 reducer has tensile strength and minimum yield strength. Stainless Steel 347 Stub End Fittings are a non-magnetic grade that cannot be hardened by heat treatment, are typically used in the annealed condition, and are known for their ease of fabrication and formability.

Grade 304 stainless steel is the most widely used grade of stainless steel. Grade 304 stainless steel is one of the most preferred stainless grades on the market due to its corrosion resistance, formability, weldability and mechanical properties. Stainless steel manufacturers value the production of 304 high-quality stainless steel because of its ease of production and superior price. Due to these characteristics, stainless steel manufacturers are more intensive in production.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.68

A276 specification 310S bar stock to manufacture stainless steel 310S bolts, nuts, screws, studs, threaded rods, other fasteners and bar stock assemblies for general engineering purposes. Each of the approximately 20 elements of a stainless steel 310S hex bolt has a significant effect on the microstructure as well as the temperature, hold time and cooling rate of the microstructure change.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

These stainless steel ASTM A453 Grade 660 bolts can be used up to 700¡ãC. This alloy achieves high tensile strength through a high degree of homogeneity. ASTM A286 bolts have an impressive minimum yield strength of 105,000 psi. Because SA 453 660 grade material retains its high strength even at high temperatures, these fasteners and bolts are commonly used in high temperature environments such as jet engines, turbocharger components, and gas turbines.

Stainless Grade 347 | UNS# S34700 is a stabilized austenitic stainless steel very similar to Grade/Alloy 304, containing niobium and tantalum. To avoid chromium carbide precipitation, columbium is used for stabilization.

For applications where stainless steel tubing or piping must come into contact with food and other sensitive products, sanitation is a high priority. Stainless steel sanitary tubing is used in such applications because it has high corrosion-resistance, doesn¡¯t tarnish, and is easy to keep clean.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Grade 310/310S stainless steel is 25% chromium and 20% nickel, making it highly resistant to oxidation and corrosion. Grade 310S is a low carbon version that is less prone to embrittlement and sensitization in use.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

Stainless steel pipe is used for structural and piping applications that require the properties that stainless steel delivers ¨C high strength, toughness and excellent corrosion resistance. The pipe is available in sizes 1/2″ through 36″ in outside diameter and schedules 05S through 80S and larger for wall thickness. It is available as welded and seamless. Stainless pipe has a dull gray, mill finish.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

To keep track of the distinguishing characteristics of steel, manufacturers have created a naming system that is both systematic and exhaustive.

Grade 316 is the standard molybdenum-containing grade, second only to 304 in importance in austenitic stainless steels. Compared to 304, molybdenum imparts better overall corrosion resistance to 316, especially higher resistance to pitting and crevice corrosion in chloride environments.

ASTM A182 F304L Stainless Steel Flanges
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

Compared to Types 302 and 304, 316 stainless steel has higher corrosion resistance and high creep strength. It has improved high temperature strength over 304 and exhibits excellent pitting resistance. Grade 316 is non-magnetic in the annealed state.

SAE 304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel. It is magnetic, but less magnetic than steel. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.[1]

Incoloy 925 Slip On Raised Flanges provides excellent resistance to stress-corrosion cracking, pitting and crevice corrosion in both oxidizing and reducing environments.

La aleacion 254 SMO es particularmente adecuada para aplicaciones donde se requiere resistencia al agua de mar clorada, asi como en plantas de blanqueo en la limpieza de gases de combustion, limpieza de gases de escape (EGC) en alta mar, la industria de la pulpa y el papel y la industria quimica.

We can also manufacture 410, 430 and 440 stainless steel washers. We stock a variety of thicknesses and can customize gaskets to your unique needs. For 0.010 or thicker washers, we are stamped from full hard 301 stainless steel. Passivation, DFAR compliance and DFAR certification are available upon request.

Common in the plumbing industry, threaded fittings are gateway connections used to increase and fix pipe lengths.

Stainless Steel 347 Flange is a method of connecting pipes, valves, pumps and other equipment to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or screwed. Flanged joints are made by bolting together two flanges with a gasket between them to provide a seal.