304 duplex stainless steel round bar

Structural applications often require welding to hold equipment components in place. Since the bars are used for structural purposes, it is important that they are suitable for welding, such as grade stainless steel 304L round bars. Unlike grade 304, low carbon versions of this alloy perform well in applications where welding is required.

Stainless Steel 410 Hollow Rod resists grain boundary precipitation structures in the weld heat affected zone, which makes it useful for most welding forms of chemical procedures. These stainless steel 410 hex bars have good resistance to stress corrosion cracking and pitting corrosion. Well, the low carbon content in these stainless steel 410 triangular bars minimizes grain boundary carbide precipitation throughout the welding process, designed to maintain corrosion resistance in the heat affected zone of the welded joint.

While the chemical composition of stainless steel 304l round bars may not differ much from grade 304, this alloy has undoubtedly proven to be very useful. This low carbon ASME SA479 Type 304l round bar has been modified to increase its weldability.

Grade 304 – This is a standard “18/8” stainless steel with excellent forming and welding characteristics. 304L is a low carbon version of 304 and does not require post weld annealing. This makes it ideal for heavy components.

Due to the molybdenum content in 316 stainless steel, this stainless steel material has excellent corrosion and heat resistance. It is resistant to various corrosive agents such as sulfuric acid, bromide, iodide and chloride, making it suitable for use in marine environments.

304 stainless steel is the most common form of stainless steel used around the world due to excellent corrosion resistance and value. 304 can withstand corrosion from most oxidizing acids. That durability makes 304 easy to sanitize, and therefore ideal for kitchen and food applications.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Stainless steel rods or stainless steel rods such as 304, 304l, 316, 316l and 347 are commonly used in construction due to their durability and resistance to rusting. All of our stainless steel is sourced from accredited factories and fully certified. Chemical and mechanical certifications are available upon request.

254 SMO Bar is a high alloyed austenitic stainless steel grade. This stainless steel grade has been developed for use in seawater and other media containing corrosive chlorides.

A round bar is a long cylindrical metal bar stock that has many industrial and commercial applications. The most common application is shafts. Products are usually measured by measuring their diameter. Standard diameters range from 1/4″ all the way up to 24″. Other sizes may be available.

AL-6XN ? alloy (UNS N08367) is a low carbon, high purity, nitrogen containing “super austenitic” stainless steel alloy. AL-6XN alloy is designed to be a seawater resistant material and has been shown to resist a wide range of corrosive environments.

347 stainless steel is an austenitic stainless steel with excellent resistance to intergranular corrosion when exposed to chromium carbide precipitation temperatures ranging from 800 to 1500 degrees Fahrenheit. Alloy 347 with tantalum – tantalum (known as niobium) has good mechanical properties at high temperatures.

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

The Stainless Steel 304 Round Bar, as the name suggests is made up of 304 grade stainless steel material. It has around 18% chromium and 8% nickel in its chemical composition. The round bar shows high resistance to corrosion and enhanced strength properties. The material is quite strong with around 515 Mpa min tensile strength and min yield strength of 205 MPa.

Precipitation hardening stainless steels are characterised by the addition of aluminium, niobium and copper to very high strengths Relatively machinable without significant deformation, depending on the additives more or less corrosion resistance compared to other types but higher Corrosion resistance results in considerable costs.

Our range of high quality ASTM A479 stainless steel round bars are designed for the chemical industry, steel mills, petrochemicals, paper industry, shipping/shipping and more. ASTM A479 Stainless Steel Round Bar is a quality standard designed and developed to international standards. We are a certified company. We manufacture all ASTM A479 stainless steel round bars with the latest technology from our manufacturing unit.

ASTM A479 can be described as a standard specification for stainless steel bars. They are available in custom shapes and sizes for use in boilers and pressure vessels. The material specification is available in four grades including austenitic, austenitic-ferritic, ferritic and martensitic grades. They have good mechanical properties such as high tensile strength, yield strength, elongation, etc. These can be used for hot and cold working bars.

This stainless steel round bar is very weldable. Strength, corrosion resistance and simplified manufacturing can make it a cost-effective alternative to high strength carbon steel and other stainless steel grades.

Austenitic stainless steels are characterised, in the most common variants, for a wide range of applications
Weldable and formable due to manganese, nickel and nitrogen chemistry, balancing moderate strength, hardness (cannot be heat treated but can be “work hardened”), ductility and toughness, relatively susceptible to SCC unless nickel content is increased, Higher molybdenum content can enhance resistance to pitting and crevice corrosion (CCR).

SMO 254 round bar has good mechanical properties. The minimum tensile strength of these bars is 650Mpa and the minimum yield strength is 300Mpa. All of these bars can be stretched by 35%. They are widely used in petrochemical, offshore drilling, pharmaceutical industry, chemical industry, etc. Our agency is a leading manufacturer and supplier of SMO 254 round bars. Our goal is to produce and supply the best products at reasonable prices.

Generally, SS ASTM A479 Forged Round Bars are available or supplied in any of the following conditions, i.e. normalized, tempered, annealed and quenched. However, in all stainless steel classes, alloys that fall into the austenitic class such as A479 316 Type alloys, in addition to being tested for corrosion resistance, are also heat treated.

The most common problem with stainless steel alloys is that they tend to undergo a process called oxidation. Oxidative corrosion can weaken the structural integrity of any project. Use appropriate materials in combination with a good finish delay, or in some cases prevent corrosion. One such example is the use of 310 stainless steel round bars, which have excellent corrosion resistance. As a heat-resistant alloy, this austenitic steel is considered a versatile multi-faceted grade. From food processing to furnaces, grade stainless steel 310 round bars are used in countless ways.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

Stainless steel round bars have a variety of applications. They are used in everything from construction to automotive components. Due to its versatility, HT PIPE offers stainless steel round bars in various grades and sizes. With our free state-of-the-art cutting service, we can meet your requirements precisely every time.

Characteristics of 304: As a heat-resistant grade, 304 stainless steel bar has good corrosion resistance to many chemical corrosive agents and industrial environments. And with good formability, 304 can be easily welded by all common methods. An ultra-low carbon variant called 304L avoids harmful carbide precipitation from welding. This variation provides the same corrosion resistance as 304, but with slightly lower mechanical properties.

Stainless steel bar offers a range of unique advantages for numerous industries and applications around the world. The advantages of stainless steel bar include long material life, corrosion resistance, attractive appearance, ease of manufacture, impact resistance and long-term value. Stainless steel is one of the most widely used metals in modern construction.

Applications for 416 stainless steel rods are pump shafts, valve components and automatic screw machine parts. Its properties are that this is considered a “free processing variant” of 410, with effective corrosion resistance to natural food acids, alkaline salts, water and most atmospheres.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

304 stainless steel round bars have very good formability and can be easily welded by all common methods. 304/304L dual certification.

Our stainless steel round bar stock ranges from 1/8¡± to 24¡± diameter. We are the industry leader in long bar stock ranging from 20′-24′ R/L. This means we are able to supply stainless steel for projects requiring lengths longer than the industry standard 12′. The long length also provides flexibility in part length, often leaving excess scrap on the standard 12′ length.