stainless steel bar

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Titanium’s density is about 60% that of stainless steel and nickel alloys, this weight saving makes it a popular choice in applications where this is critical such as aerospace.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Another important feature of the N08800 Incoloy Alloy 800 Cold Rolled Plate is its excellent resistance to chlorine ion stress related corrosion cracking, to which the metal, like its other Inconel counterparts is virtually immune to.
Type Plate, Sheet,Strip Coil
Length 0~12m or as per your requirements
Width 0~2500mm or as per your requirements
Thickness 0.3~1200mm or as per your requirements

Inconel 600 is a nickel-chromium-iron alloy with excellent corrosion resistance, oxidation resistance and high strength at elevated temperatures. Due to its high nickel content, Inconel 600 is extremely resistant to chloride ion stress corrosion cracking. Age hardening is not required as Inconel 600 is hardened and strengthened by cold work only. The Inconel 600 can operate in temperatures as low as 700¡ãF (370¡ãC).
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Round bars are cold drawn and annealed, available in stock lengths or cut to size. Alloy round bars provide strength and corrosion resistance in a variety of environments and can be used in the frame, machine part manufacturing, food service and medical device industries.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Carbon steel flange is a kind of rim formed at the end of the pipe when it is fixed on the pipe. It is used to seal the ends of pipes, valves or other connections. It has high tensile strength and is available with convex surfaces and supports for easy installation. It is an iron-carbon alloy containing up to 2.1 wt.% carbon. Carbon steel does not have minimum specified levels of other alloying elements, but it usually contains manganese.

UNS S32205 Duplex Steel ASME SA182 Butt Weld Flanges are suitable for seawater and power generation equipment because their smooth surfaces can withstand temperatures up to 600¡ãF, while also having excellent flow characteristics.

Hastelloy C-276 is a Ni Mo CR superalloy added with tungsten, which has excellent corrosion resistance in a wide range of harsh environments. The high content of Ni and Mo makes the Ni steel alloy particularly resistant to pitting and crevice corrosion in reducing environment, while CR transfers the performance of anti-oxidation medium.

Although molybdenum is a good element, excessive use of it may reduce the creep ductility of Gr F11 plate flanges. Graphitization and decomposition of iron carbide may occur when the temperature exceeds 500 degrees Celsius. Chromium has been added to SA A182 F11 alloy steel CL.2 forged pipe flanges to prevent creep ductility reduction and graphitization. In addition, the added chromium also provides oxidation resistance.

Duplex steel flanges are widely used in the used engineering, machinery and automotive industries. Duplex Steel S31803 Lap Flanges are ideal for applications requiring better corrosion resistance than Type 316 and good high temperature strength. We have Duplex Steel S31803 / S32205 Flanges in stock. Duplex steel flanges are commonly used in chemical, petrochemical, and power industries.

Nickel 200 is a solid solution strengthened metal. Nickel 200 Bar Stock contains 99.6% wrought nickel by weight and is considered commercially pure nickel. DIN 2.4066 Bar has good mechanical and physical properties. For example, ASTM B160 N02200 has excellent resistance to many corrosive compounds as well as corrosive environments. Meanwhile, Nickel 200 is a solid solution strengthened wrought alloy that can be designed as round bars and rods. These two components are used interchangeably and can be distinguished from certain key functions.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Flange is the parts which connects two pipe ends, flange connection is defined by the flange, gasket and bolt three are connected as a group of combined sealing structure of the detachable connection. The gasket is added between the two flanges and then fastened by bolts. Different pressure flange, thickness is different, and the bolts they use are different, when pump and valve connect with pipe, the parts of the equipment are also made of the corresponding flange shape, also known as flange connection, usually closured bolted connection parts are also known as flanges, such as the connection of ventilation pipe, this kind of parts can be called “flange type part”, but this connection is only part of a device, such as the connection between flange and water pump, it’s not inapposite to call water pump as flange type parts,but relative small valve,it can be called as flange type parts .

Like other austenitic grades, these grades have excellent toughness even down to low temperatures, although other grades are often used in this environment.
Grade 310sL (and a proprietary version of this grade), a version of the 310s with a maximum carbon content of 0.03%, is sometimes used in very specific corrosive environments, such as urea production.

Our 347 stainless steel bars are extremely resistant to prolonged heat and corrosion, making them ideal for power generation, engines, welded fabrication and other high temperature applications. Also known as UNS S34700 bars, these 347 stainless steel bars have superior creep and stress rupture properties compared to other grades such as 304 stainless steel, with excellent mechanical properties.

These bars are also beneficial in applications where the annealing procedure needs to be omitted after welding. Also known as WNR 1.4550 bars, these SS 347 bars are available to our valued customers in a different range of diameters, wall thicknesses and sizes at market leading prices.

Round bars are long cylindrical metal raw materials that are used in different industries. 254 SMO round bar is an austenitic stainless steel. These bars have good nickel, chromium and molybdenum chemistries. This makes these bars resistant to oxidation and all forms of corrosion.

SMO 254 round bar has good mechanical properties. The minimum tensile strength of these bars is 650Mpa and the minimum yield strength is 300Mpa. All of these bars can be stretched by 35%. They are widely used in petrochemical, offshore drilling, pharmaceutical industry, chemical industry, etc. Our agency is a leading manufacturer and supplier of SMO 254 round bars. Our goal is to produce and supply the best products at reasonable prices.

321 Stainless Steel Square Bar It can be categorically said that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery. Widely used in automotive, textile, manufacturing, construction, cement, shipbuilding, paper and pulp, defense, heavy earthmoving equipment or aerospace.

The balanced austenitic structure of Grade 321 enables deep drawing without intermediate annealing, which makes this grade dominant in the manufacture of drawn stainless steel parts such as sinks, hollowware and pans.

Structural applications often require welding to hold equipment components in place. Since the bars are used for structural purposes, it is important that they are suitable for welding, such as grade stainless steel 304L round bars. Unlike grade 304, low carbon versions of this alloy perform well in applications where welding is required.

HT PIPE is one of the well-established manufacturers and suppliers of Stainless Steel 316Ti Bar.

The high strength and corrosion resistance of AL6XN alloys make them a better choice than traditional duplex stainless steels and a cost-effective alternative to more expensive nickel-based alloys, which offer excellent formability, weldability, strength and Corrosion resistance.

Similar to the 304 grade, the 304L SS Hex Bar is used for applications requiring price control. Perfect Impex is one of the suppliers of cut-to-length bars in all grades, saving you additional costs. We are stainless steel 304L flat bar supplier, supplying steel bars in all finishes.

316 stainless steel has a better resistance to chemicals and chlorides (like salt) than ss 304. When it comes to applications with chlorinated solutions or exposure to salt, grade 316 stainless steel is considered superior, so it is usally called marine grade stainless steel.

347 Reputed Manufacturers, Exporters and Suppliers of Wide Variety of Round Bars. Available ASTM A479 347 round bars are designed to the highest precision and meet international quality standards.

ASTM A479 347 Round Bars can clearly say that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery. Widely used in automotive, textile, manufacturing, construction, cement, shipbuilding, paper and pulp, defense, heavy earthmoving equipment or aerospace.

Grade 410 stainless steel is a general-purpose martensitic stainless steel containing 11.5% chromium with good corrosion resistance. However, through a series of processes such as quenching, tempering, and polishing, the corrosion resistance of grade 410 steel can be further enhanced. Quenching and tempering can harden grade 410 steel. They are typically used in applications involving mild corrosion, heat resistance and high strength.

ASTM A276 347 Round Bars can clearly say that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery. Widely used in automotive, textile, manufacturing, construction, cement, shipbuilding, paper and pulp, defense, heavy earthmoving equipment or aerospace.

Grade 410 stainless steel is a general-purpose martensitic stainless steel containing 11.5% chromium with good corrosion resistance. However, through a series of processes such as quenching, tempering, and polishing, the corrosion resistance of grade 410 steel can be further enhanced. Quenching and tempering can harden grade 410 steel. They are typically used in applications involving mild corrosion, heat resistance and high strength.

HT PIPE is a well-known company that manufactures and sells SS 410 round bars with good corrosion resistance in tumbling environments. Stainless steel 410 square bars are also very resistant to hydrochloric acid at all temperatures and concentrations. Well, this stainless 410 flat bar must not be used in the temperature range between 1000¡ãF and 1600¡ãF because the alloy will be less ductile. These stainless steel 410 threaded rods are used in a variety of applications such as chemical processes, mechanical components in immersion atmospheres, vacuum furnaces, and more.

Stainless Steel 410 Hollow Rod resists grain boundary precipitation structures in the weld heat affected zone, which makes it useful for most welding forms of chemical procedures. These stainless steel 410 hex bars have good resistance to stress corrosion cracking and pitting corrosion. Well, the low carbon content in these stainless steel 410 triangular bars minimizes grain boundary carbide precipitation throughout the welding process, designed to maintain corrosion resistance in the heat affected zone of the welded joint.

904l Stainless Steel Round Bar It can be categorically said that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery. Widely used in automotive, textile, manufacturing, construction, cement, shipbuilding, paper and pulp, defense, heavy earthmoving equipment or aerospace.

ASTM A479 310s Round Bars can clearly say that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery. Widely used in automotive, textile, manufacturing, construction, cement, shipbuilding, paper and pulp, defense, heavy earthmoving equipment or aerospace.

Grade 310 stainless steel, combining excellent high temperature performance with good ductility and weldability, designed for high temperature service. In the absence of reducing sulfur gas, it resists oxidation in continuous operation at temperatures up to 1150¡ãC. It can also be used for intermittent service at temperatures up to 1040¡ãC.

AL-6XN ? alloy (UNS N08367) is a low carbon, high purity, nitrogen containing “super austenitic” stainless steel alloy. AL-6XN alloy is designed to be a seawater resistant material and has been shown to resist a wide range of corrosive environments.

Grade 310sS (UNS S310s08) is used when the application environment involves wet corrosive agents in a temperature range lower than what is normally considered “high temperature” service. The lower carbon content of 310sS does reduce its high temperature strength compared to 310s.

Cold-drawn stainless steel bars are cold-finished, which means they are further processed after hot rolling. The hot-rolled and cold-drawn process helps improve bar dimensional tolerances, straightness, surface appearance, and overall physical properties. These SS bars are the most accurate compared to hot rolled bars. They have a smooth surface finish.

Polished stainless steel bars are made of 304 stainless steel. They have good machinability, good formability and excellent weldability. They also show good corrosion resistance. These rebars are used in a variety of architectural and structural applications. Instead of working wheels, these bars are polished with leather chain straps. This is done for a smoother and brighter surface. They are also available in a mirror finish.

316 stainless steel round bars are ideal for most machining techniques and for indoor and outdoor applications. AISI 316 stainless steel is a non-magnetic, high-strength material with excellent corrosion resistance. 316 is slightly stronger than 303 and 304 stainless steel. Making it ideal for the food and pharmaceutical industries, as well as in areas involving marine environments, aerospace, process equipment, chemicals or other aggressive substances.

Stainless steel round bars are also sometimes called bright bars or solid bars. Since it is made of stainless steel containing chromium, this product has excellent corrosion resistance. Those grades with higher alloy content have the added benefit of being highly resistant to acid, chlorine and alkaline solutions. These properties, combined with inherent strength and longevity, have helped make stainless steel round bars popular in industries such as transportation, construction, automotive, and petrochemicals.

Round bars can be manufactured using cold-finishing or hot-finishing processes, and are often available in many different grades and diameters, making them suitable for many different applications. Grade 303 – This is generally considered the best grade for machining, so is naturally popular in projects that require a lot of machining.

Grade 304 – This is a standard “18/8” stainless steel with excellent forming and welding characteristics. 304L is a low carbon version of 304 and does not require post weld annealing. This makes it ideal for heavy components.