825 round bar PMI testing

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Inconel 600 is a nickel-chromium-iron alloy with excellent corrosion resistance, oxidation resistance and high strength at elevated temperatures. Due to its high nickel content, Inconel 600 is extremely resistant to chloride ion stress corrosion cracking. Age hardening is not required as Inconel 600 is hardened and strengthened by cold work only. The Inconel 600 can operate in temperatures as low as 700¡ãF (370¡ãC).
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Nickel 200 is a solid solution strengthened metal. Nickel 200 Bar Stock contains 99.6% wrought nickel by weight and is considered commercially pure nickel. DIN 2.4066 Bar has good mechanical and physical properties. For example, ASTM B160 N02200 has excellent resistance to many corrosive compounds as well as corrosive environments. Meanwhile, Nickel 200 is a solid solution strengthened wrought alloy that can be designed as round bars and rods. These two components are used interchangeably and can be distinguished from certain key functions.

Round bars are cold drawn and annealed, available in stock lengths or cut to size. Alloy round bars provide strength and corrosion resistance in a variety of environments and can be used in the frame, machine part manufacturing, food service and medical device industries.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Inconel X750 is a nickel-chromium alloy that has been used for both wrought products and castings. Inconel X750 offers excellent resistance to corrosion and oxidation along with high strength and good toughness properties at elevated temperatures.

The alloy 601 also has good resistance to aqueous corrosion.

Alloy steels have better strength, durability, toughness, hardenability and hot hardness than carbon steels used to make metal bars and rods. Alloy steel bars are widely used in many different steel making applications and can be easily fabricated by machining, forming, casting and welding.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Inconel 625 round bar is extremely corrosion resistant in a variety of extremely corrosive environments.

2.4375 Monel K500 round bar is non-magnetic, as an alloy, Monel K500 ASTM B865 hexagonal bar exhibits excellent mechanical properties over a temperature range from sub-zero settings to 480C. Monel ASTM B865 hollow bars require annealing when welded, and weldments should be stress relieved to the alloy prior to aging.

The Nickel Alloy 601 Cold Finished Bar is formed after the hot-rolling process comes to an end.

Inconel 600 threaded rod is Inconel, a common engineering material used in applications requiring corrosion and temperature resistance. The chromium content of Alloy 600 threaded rod makes it greater than commercial pure nickel in rusted conditions. The tensile strength of this bar is Psi 95,000, MPa 655, while the melting point is also discussed Melting point: 1413 C.

The advantages and disadvantages of copper-nickel alloys are that pure copper plus nickel can significantly improve strength, corrosion resistance, hardness, electrical resistance and thermoelectricity, while also reducing the temperature coefficient.

G30 alloy can prevent the formation of grain boundary precipitation in the heat affected zone of welding, so its welded products are suitable for various chemical treatment engineering applications.

ASTM B425 UNS N08825 bar stock has a nickel content between 38% and 46% and is able to withstand a moderately high temperature range without affecting its tensile strength.

Some applications suitable for Inconel 625 include seawater, aerospace and chemical processing. About Seawater Inconel 625 is a common choice due to its excellent corrosion resistance, fatigue strength and high tensile strength. Not to mention its strong resistance to chloride ion stress corrosion cracking. Propeller blades, subsea motors, and subsea cable sheathing are good applications for Inconel 625, where the bar becomes wire once it passes through a certain minimum diameter, in which case the wire can be used for mooring cables.

INCONEL alloy 718 is ideal for use in these circumstances.Inconel 718 can be easily machined and elongated by 30%.

G30 alloy can prevent the formation of grain boundary precipitation in the heat affected zone of welding, so its welded products are suitable for various chemical treatment engineering applications.

Due to the solid solution effect of refractory metals, it has excellent toughness and strength in the temperature range from low temperature to 2000¡ãC (1093¡ãC). This Inconel grade can withstand stress cracking up to 1200¡ãC (649¡ãC) and is resistant to oxidation and oxidation up to 2000¡ãC.

Hastelloy G30 Hastelloy alloy is a kind of nickel base high temperature alloy composed of nickel, chromium, cobalt, tungsten and other elements, the nickel content is about 37%.

One of the benefits of using 2.4858 Incoloy 825 round bar is its high corrosion resistance. Incoloy 825 has a high content of nickel and a very stable austenitic structure. This high nickel content in Incoloy 825 alloy bars provides good resistance to chloride ion stress corrosion cracking.

Alloy C276 bar can be used for welding in most chemical process environments. Alloy C276 rods can be successfully fabricated in a number of ways. Inconel C276 round bars also have exceptional corrosion resistance and ability to withstand extreme temperatures. These Inconel C276 rods are available in a variety of sizes to meet customer application requirements.

Incoloy 800 is part of austenitic steels. Inconel 800 Flat Bars are composed of high quality nickel, chromium, iron, manganese, molybdenum and other alloys. Uns N08800 round bars are designed with a rectangular cross-section.

Inconel 800 round bar is an iron, nickel and chromium based alloy. This Inconel 800H hot-worked round bar is known for its moderate tensile strength, good oxidation and carburization resistance, and performance at elevated temperatures.

Inconel X750 is an alloy that has a high resistance to corrosion and oxidation. Inconel X750 also resistant to creep deformation, which makes it suitable for use in high-temperature environments where other alloys would deform over time.

It also resists pitting and crevice corrosion well in fresh seawater at temperatures up to 50¡ãC (122¡ãF).

Incoloy 800 was the first alloy as Incoloy 800H was slightly changed. To improve stress fracture properties, adjustments were made to control carbon and grain size.

Inconel 625 round bars can be manufactured in hot-worked bar form per ASTM B446 specification. These properties specified by ASTM B446 for 2.4856 Inconel 625 hexagonal bar include the tensile strength, yield strength and elongation properties of the material.

Improvements in alloy metallurgy, melting techniques and thermomechanical processing led to the development of Alloy 31, a relatively low cost alloy with high corrosion resistance.

Monel 400 (UNS N04400) is a nickel-copper alloy with optimum high strength and corrosion resistance. It is widely used in a variety of severe acidic and alkaline environments. Monel is also used in pipes.

Inconel 625 bar is a heat resistant nickel based superalloy. The high strength of these bars makes them a difficult prospect for machines. Bars of this grade have a machinability rating of 17% and a hardness of 29 HRC.

The ASTM B166 specification is the standard for Alloy 718 ASTM B166 hot rolled bar.

Incoloy 825 round bar has excellent resistance to a variety of environmental and corrosive conditions such as stress corrosion cracking, reducing environments, oxidizing environments, pitting, crevice and intergranular corrosion. These circular die have excellent mechanical properties over a wide temperature range.

The alloy 601 also has good resistance to aqueous corrosion.

Inconel 718 round bar is a nickel-chromium alloy bar with up to 55% nickel in its composition. Contents include 17% chromium, 4.9% niobium, 6.6% iron minimum and aluminum, boron, carbon, cobalt, copper, manganese, phosphorus, lead, sulfur and silicon. The material has an ultimate tensile strength of 1375 MPa and a minimum yield strength of 1100 MPa.