acero inoxidable duplex 2205 1.4462 tubos composicion quimica

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

ASTM A479 Duplex Steel UNS S31803 Nuts have excellent general corrosion resistance in a variety of aggressive chemicals including seawater and industrial acids. The microstructure of ASME SA 479 Duplex Steel UNS S32205 Hex Nuts consists of a mixture of austenitic and ferritic phases. Therefore, it exhibits the properties of austenitic and ferritic stainless steels.

The formation of ASTM A479 duplex steel UNS S32205 tie rod consists of a pool of austenite surrounded by continuous ferrite phases. ASME SA 479 Duplex Steel UNS S31803 Tie Rods are hot worked in the temperature range of 1750¡ãF to 2100¡ãF. This is designed to reduce the depth used in fabrication, thereby reducing the weight of precise significance for items such as pressure vessels, structural functions, etc. As ASTM A479 dual phase steel for bridges, storage tanks, etc. UNS S32205 rebar has approximately twice the superior performance of SS 304 .

There are SA 182 F53 S32750 Blind Flanges, socket weld flanges and weld neck flanges in this range of material. The different flanges are used in different applications set ups.

ASTM A240 is a normative standard covering several chromium-based stainless steel grades manufactured in sheet, sheet, or ASTM A240 Gr 2205 strip.

Heat and product analysis is to be performed on the SA 789 Alloy 2205 Pipe Material.

Duplex 2507 has high resistance to chloride stress corrosion cracking, high Strength, and superior resistance to chloride pitting and crevice corrosion.

The properties of S31803 nuts are even double those of standard austenitic grades.

The advantages of duplex steels include: good weldability and machinability, high resistance to corrosion fatigue, resistance to stress corrosion cracking (especially chloride stress corrosion cracking), erosion and high energy absorption.

The 2205 duplex stainless steel pipe also demonstrates good fatigue strength, as well as outstanding resistance to stress related corrosion cracking, crevice corrosion, pitting, erosion corrosion, and general corrosion in severe environments.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The chemical composition of 2205 Duplex Stainless Pipe consists of the elements being used in the following content i.e. – 22% chromium, 3% molybdenum and about 5 to 6% nickel. Because of the content, in terms of quantity of chromium present in the alloy of this grade, this stainless steel is also referred to as 22cr Duplex 2205 Pipe.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The chemistry of this steel ensures better performance with higher mechanical properties in comparison to austenitic stainless steel pipes.

ASTM A240 UNS S32760 Plate is a super duplex stainless steel alloy for specific applications.

Alloy 2205 duplex stainless steel plate has better pitting and crevice corrosion resistance than 316L or 317L austenitic stainless steel in almost all corrosive media.

The round and hollow pipes are usual ones. In addition to the Duplex Stainless Hollow Pipes and the Duplex Steel Round Pipes there are square, rectangular and hexagonal pipes available in the market.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex stainless steel fasteners are made from alloys with high chromium content and low to moderate nickel content.

Due to the alloy’s very high mechanical strength, dual-phase fastener manufacturers can reduce the weight of their designs by thinning the cross-section of the final product, proving a cost-saving alternative to other grades of stainless steel.

A Super Duplex 2507 Pipe has outstanding resistance to corrosive and oxidative media.

Duplex 2205 alloy is composed of high chromium and low or moderate nickel conutenut.

The high chromium, molybdenum, and nickel levels provide excellent resistance to pitting, crevice, and general corrosion.

Duplex stainless steels have a mixed microstructure of austenite and ferrite, the aim being to produce a 50/50 mix, although, in commercial alloys, the mix may be 40/60 respectively.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The mechanical strength, corrosion resistance and low temperature toughness of the ASTM A182 F53 Flanges is higher than that of ordinary duplex stainless steels.

In the annealed condition, S31803 contains approximately 40-50% ferrite. S31803 is often referred to as the workhorse grade and is the most widely used grade in duplex stainless steel pipes. The use of S31803 stainless steel pipe should be limited to temperatures below 600¡ãF.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.64

Duplex stainless steel is designed to combine improved resistance to stress corrosion cracking (including sulfide stress corrosion cracking), pitting, crevice corrosion and high strength when compared with other stainless alloys.

The origin of Duplex steels can be traced back to the 1920s, with the first cast being made in Sweden in 1930. However, the popularity of using duplex only started to rise around 30 years ago when steelmaking technology became more advanced. The two types of metals used to make Duplex ¨C austenitic and ferritic ¨C are both fit for purpose in many types of scenarios but they both have weaknesses that prevent them from being used more widely.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

These grades are excellent for fixed service simple flange connections, but slightly less so when forming a complex metallic shape. Fortunately, the workability of duplex into complex and rounded structures is less of an issue in structural steel given the wide preference for simple mild steel in non corrosive applications.

Our duplex steel UNS S31803 fasteners are available in different grades such as industrial washers, industrial screws, stainless steel washers, stainless steel screws and more.

Duplex 2205 fasteners are made from cost-effective, long-lasting and corrosion-resistant steel. The grade of steel used to make fasteners can be ferritic, austenitic or dual phase steel. Duplex materials have the strength qualities of ferritic steels and the corrosion-resistant qualities of austenitic steels.

Duplex steel UNS S31803 hex nuts are widely suitable for the effects of sulphurous gases, especially above 900 degrees Celsius, very low.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Duplex Stainless Steel offers excellent resistance to corrosion along with very high mechanical strength, which allows for lighter fabrication and greater design flexibility. With this high corrosion resistance, Duplex Stainless Steel provides more uptime than Carbon Steel or conventional Stainless Steel.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”