ALLOY C2000 FORGED FLANGES UNS N06200 FLANGES

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Hastelloy C276 boards can be easily welded using the most traditional processes. In general, 2.4819 Hastelloy C276 Coil does not require post weld heat treatment. Brushing these boards with stainless steel wire after the welding operation usually removes the hot color and likewise creates surface areas that do not require additional pickling.

The thermal stability of Hastelloy B3 pipes is superior.

Hastelloy C276 is a formidable alloy of molybdenum, chromium, nickel, and traces of tungsten. Hastelloy C276 Plates contain high levels of nickel and molybdenum, which provide resistance to crevice corrosion and pitting in reducing conditions, while chromium provides resistance to oxidizing media.

It can be used in reducing chemical environments and chemical processing industry.

Plates are designed by continuous rolling and casting or, in most instances, steel is processed into a bullet then hot rolled to be shaped in its final plate thickness. Akin to steel plates, rolled ring forgings are forged in the same process ¨C it differs only in terms of rolling directions.
For cups having comparative large thickness and plates having
complicated cross-sectional shapes, plate forging is more useful than billet forging due to due to
comparatively small change in shape.

The use of refined technology and the modern tool has helped the producer to make the superior quality of pipes.

Incoloy alloy is applied as the prefix name to several highly corrosion resistant high temperature strength metal alloys produced by Special Metals Corporation. Nickel alloys are excellent for heat exchangers in the chemical processing and nuclear industries. They’re used in steam generator tubing in the nuclear power industry, in high-temperature aircraft systems, and in oil and gas extraction programs where corrosion-, pressure- and temperature-resistant tubing is required

Hastelloy C276 SB575 4mm Thick Plate is by far the most commonly used alloy in different industries.

Hastelloy DIN NR. 2.4819 Pipe is a nickel based superalloy. Apart from its primary base alloying element, the alloy for Hastelloy C276 Pipe also contains elements molybdenum & chromium, which results in the alloy gaining certain properties.

Prefabricated steel s take advantage of offsite prefabrication to improve the speed or erection and cost predictability of the solution.

The nickel and molybdenum component of ASTM B575 Hastelloy C-276 Sheets aids in their resistance to pitting and crevice corrosion in reducing conditions.

Hastelloy G30 is resistant to grain precipitation in high temperature regions. Hastelloy G30 fasteners exhibit physical properties such as thermal conductivity, elongation, and elastic modulus. Hastelloy G30 has properties such as yield strength and tensile strength. Our company supplies these fasteners to oil and gas, refineries, fertilizers, heat exchangers. These fasteners are also used in water treatment, sugar, dairy and food processing. It also shows density, area reduction, and coefficient of linear thermal expansion. Our Hastelloy G30 fasteners are highly resistant to hydrochloric and nitric acids. The alloy has superior resistance to industrial phosphoric acid. Hastelloy G30 fasteners perform well in corrosive environments.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

When standard 90-degree elbows won¡¯t work with your system design or space requirements, bent pipes and tubing are an excellent routing option.

Alloy C276 bar welding products are used as a matching composition filler material for welding C276 alloy forged and cast products in dissimilar welding applications including other NiCrMo alloys and stainless steels, as well as for surfacing or cladding of steel. Parts thermoformed in HASTELLOY C-276 alloy bar should, if possible, be solution heat treated prior to final fabrication or installation.

Another difference between Astm B626 Nickel Alloy C276 Welded Pipe and Alloy C is that Alloy C276 pipe has better machinability.

Hastelloy C276 bushings have high nickel and molybdenum contents to provide good corrosion resistance in reducing environments.

These alloys of flanges are exceptionally resistant to stress corrosion cracking petrochemical applications. Moreover, the molybdenum content results in outstanding strength in solid solution alloy that considers excellent fabrication attributes.

Nickel alloys provide high resistance to a wide variety of corrosive agents, oxidation and excellent performance at high temperatures.Certain Nickel Alloys are better for high temperature applications, while others do a better job with corrosion resistance.

Hastelloy G30 Hastelloy alloys exhibit better resistance to commercial phosphoric acid than other nickel or iron based alloys. Its application as an acid evaporator in the fertilizer industry is increasing day by day.

Steel Plate are often used for structural and construction applications, pressure vessels, marine and offshord equipment, and military applications. The grade, elements and parameters of a steel plate are also important in how it is used.
Steel plates are classified by thickness: thin plate, medium plate, thick plate and extra-thick plate.
Thin steel plates are steel plates with a thickness between 0.2-4mm produced by hot rolling or cold rolling, and thick steel plates are those with a thickness of more than 4mm
The general name of the good board.
Thin steel plate refers to a steel plate with a thickness of not more than 3 mm. The commonly used thin steel plate thickness is 0.5-2MM, which is divided into sheet and coil supply. Thin
The steel plates are generally B-type steels, cold-rolled or hot-rolled steel plates with steel grades B0-B3. Requirements for thin steel plates: smooth, smooth surface, thick
The degree of uniformity, allowing a tight iron oxide film, must not have cracks, scarring and other defects. The process is divided into hot rolled sheet steel and cold rolled sheet
plate. Mainly used in Changlin Dongfeng fans, automobiles, electrical equipment, vehicles, agricultural machinery, containers, steel furniture, etc.
Thick steel plates refer to steel plates with a thickness greater than millimeters. Thick steel plate is divided into extra-thick steel plate and medium-thick steel plate.
Medium and heavy steel plates refer to steel plates with a thickness greater than 3 mm and less than 50 mm. Medium and thick steel plates are mainly used in shipbuilding, boilers, bridges
Armor and high-pressure vessel shells, etc.
Extra-thick steel plate refers to a steel plate with a thickness of not less than 50 mm. Extra-thick steel plates are mainly used in shipbuilding, boilers, bridges and high-pressure vessel shells
blog.

Hastelloy C276 is one of the few materials that can withstand the corrosive effects of wet chlorine, hypochlorite and chlorine dioxide.

These alloy of flanges primarily noted for good oxidation and heat resistance.

These Hastelloy C276 contain a mixture of molybdenum, nickel and chromium species. Like other nickel alloys, it is ductile, easy to form and weld, and has excellent resistance to stress corrosion cracking (a form of easily degradable austenitic stainless steel) in chloride-containing solutions. Due to its high chromium and molybdenum content, it is resistant to oxidizing and non-oxidizing acids and exhibits excellent resistance to pitting and crevice corrosion in the presence of chlorides and other halides.

Thus these Hastelloy B2 Flanges are considered to be well suited to be used for most chemical process applications in an as-welded condition. Due to lower carbon content in the alloy, there is reduced precipitation of carbides as well as other phases in the heat-affected weld zones, which in turn ensures uniform resistance to corrosion in the flange.

These fasteners are designed according to the quality of raw materials according to national and international standards, thus ensuring their durability and high quality.

Hastealloy is a term that refers to a group of corrosion resistant metal mixtures that are based on nickel. Hastealloys have a unique combination of properties that provide them with significantly stronger corrosion resistance capabilities compared to traditional alloys. As such, it was widely accepted in the chemical process and associated industries, and now has a 50-year-old track record of proven performance in a vast number of corrosive chemicals.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The ANSI B16.5 Hastelloy C22 Weld Neck Flanges is an austenitic alloy grade that is considered to be versatile in nature. Chemically, the DIN 2.4602 Slip On Flange consists of elements such as nickel, chromium, molybdenum & tungsten as a primary base in the alloy.

There are different sizes according to different standards of ASTM B574 UNS N10276 Fasteners. Hastelloy C276 alloy is very easy to manufacture and does not require heat treatment after welding. Hastelloy C276 alloy excels in many industrial applications (i.e. chemical processing).