ASTM A182 316L spacer ring excellent formability characteristics

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

This material is widely used in large gauge welded components and weld annealing is only required when the material is used in high stress environments. Due to the material’s high corrosion resistance, 316L has a wide range of uses, especially in marine applications.

The SS 310 Flange as well as other flanges in this grade hold similar strength to that of the 304 and 316 grades of flanges. The minimum yield strength is 205MPa and the minimum tensile strength of the 310 material is 515MPa.

If your outdoor appliance enclosure is rusted, not only is there a danger of exposing all critical electrical components inside, but it can be expensive to replace in the event of a short. We’re talking about parts damage and replacement, repair costs, including labor and downtime. I’ve seen some real horror shows when the shell is rusted. We have found that using 316 stainless steel instead of 304 stainless steel on outdoor enclosures that will be exposed to various elements, such as oil rigs, not only increases the life of the enclosure, it is also safer.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.43

Nickel makes the stainless steel easy to form and weld. They are ductile at low temperature and also can be used for high temperature. Addition of nickel makes the ordinary steel which has a ferrite-body centred cubic structure to austenitic steel which has face centred cubic structure.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

SS 347 flanges are used at cryogenic temperatures as well as high temperatures and at high wear and tear applications

316 Stainless Steel Rod Applications: Pumps, Valves, Textile and Chemical Equipment, Pulp and Paper, and Marine Applications.

Another industry that uses this alloy is the food and beverage industry, which uses acetic acid as a preservative. Acetic acid is an organic acid that is corrosive to carbon steel.

304 stainless steel, also known as 18/8, is a kind of chromium-nickel stainless steel with strong versatility and widest application. As a widely used steel, it has good corrosion resistance, heat resistance, strength and low temperature mechanical properties. Excellent hot workability such as stamping and bending. No heat treatment hardening phenomenon. If it is in an industrial polluted area, it needs to be cleaned in time to avoid corrosion.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.52

Stainless Steel 316 Flanges
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

254SMO made of high concentration of molybdenum, chromium and nitrogen has good resistance to pitting and crevice corrosion. Copper improves corrosion resistance in certain acids. In addition, 254SMO has good stress strength corrosion cracking properties due to its high content of nickel, chromium and molybdenum.

The high amounts of nickel and chromium in austenitic stainless steels provide excellent mechanical properties, as well as excellent corrosion resistance.

304L stainless steel pipe is a low carbon variant of grade 304 – the steel can be welded without problems with carbon precipitation (the precipitation of chromium carbide when heat is applied during welding depletes the steel of chromium, reducing its resistance to -corrosion/oxidation Effect).

ASME B16.9 Sa 182 Gr F304 F316 BLRF Flanges
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

We are one of the well-known Manufacturers, Supplier, and Exporter of 254 SMO Flex Pipe, Stainless Steel 254 SMO Pipes, 6MO Stainless Steel Pipe, ASTM A312 UNS S31254 Seamless Pipe, 254 SMO Stainless Steel Pipe, Stainless Steel 254 SMO Welded Pipes which are using high-quality raw material.

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

Among many applications, products include instrumentation components for the mechanical, chemical, petroleum, watchmaking, food and beverage, and medical industries.

316L can be used in large diameter annealed condition or small cross section cold worked condition.

In order to suppress the welding of carbide precipitation, 304/304L stainless steel pipes can be welded by common welding methods. Manual arc welding, the thin section size of 304 stainless steel with 0.04%-0.06% carbon can be used with Austrian 002 electrode, which will not cause intergranular corrosion after welding. For thick section rulers, keep the resistance after intergranular corrosion resistance. , should be changed to 304L stainless steel or stabilized austenitic stainless steel.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.24

Any cold working operations will increase the strength and hardness of the material, and may leave it slightly magnetic. AISI 304H can be forged in the 1700-2200°F range.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

AL-6XN alloy is easy to weld using similar parameters as Type 316L stainless steel, including travel speed (IPM) and weld current. It is common to use a weld insert ring for additional alloying when orbital or manual welding in the field.

Type 316L stainless steel in a molybdenum bearing austenitic.

Stainless steel flange has good metal performance and corrosion resistance. All metals react with oxygen in the atmosphere to form an oxide film on the surface.

A variety of stainless steel pipes are available in different schedules. These schedules define the thickness of the walls of these stainless steel pipes.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Stainless steel UNS S30400 round bars are used to grow a variety of utensils, chemical equipment, cookware and loads of various digital and electrical machinery and parts. They are also used in the cement industry, shipbuilding industry, petrochemical industry, chemical industry, sugar mills, etc.
We use the best metal alloys available to manufacture the round bars and their finish is clean and precise.

There are many different types of 316 stainless steel. Some common types are the L, F, N, and H variants. Each is slightly different and each serves a different purpose. “L” means 316L steel has less carbon than 316.

Werkstoff No.1.4436 316 stainless steel fittings are resistant to atmospheric corrosion, as well as moderately oxidizing and reducing environments. Corrosion resistant in polluted marine atmospheres. It has excellent resistance to intergranular corrosion.

Stainless steel 316 flanges are composed of a chrome-nickel-molybdenum alloy and are typically used in conditions prone to chloride ion corrosion. The addition of molybdenum makes the material resistant to corrosion, especially in chloride-rich environments. 316L stainless steel flanges are the standard molybdenum grade, second only to 304 in austenitic stainless steels.

Greater strength and corrosion resistance still mandate the use of seamless stainless steel and nickel alloy tubing for high pressure applications within the oil and gas, petrochemical, chemical, energy, and pulp and paper industries.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

SS 316 Slip On Flange
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

Alloy 304/304L is non-magnetic in the annealed condition, but can become slightly magnetic as a result of cold working or welding. It can be easily welded and processed by standard shop fabrication practices.