round bar 1.4501 super duplex bar bright round S32760 bar

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Duplex 2205 stainless steels are called “duplex” because they have a two-phase microstructure consisting of ferritic and austenitic stainless steel grains. When duplex stainless steel melts, it solidifies from the liquid phase to a fully ferritic structure. As the material cools to room temperature, about half of the ferrite grains transform into austenite grains (“islands”). The result is a microstructure of approximately 50% austenite and 50% ferrite.

This alloy is especially useful in the -50¡ãF/+600¡ãF temperature range. For applications outside this temperature range, this alloy can also be considered, but there are some restrictions, especially when used in welded structures.

Super Duplex Stainless Steel Zeron 100 Washers, which is alloyed steel aimed for the usage in hostile atmospheres. Super Duplex Zeron 100 Lock Washers provides these attributes in sea water service and as well in progression pipe work functions.

Due to the alloy’s very high mechanical strength, dual-phase fastener manufacturers can reduce the weight of their designs by thinning the cross-section of the final product, proving a cost-saving alternative to other grades of stainless steel.

Due to the excellent physical and mechanical properties of Super Duplex, the quality of Super Duplex steel fasteners can meet the high demands of the gas, oil and marine industries.

Duplex steels are characterised by high chromium (19¨C28%) and molybdenum (up to 5%) and lower nickel contents than austenitic stainless steels. The most used duplex stainless steels are the 2205 (22% Chromium, 5% Nickel) and the 2507 (25% Chromium, 7% Nickel); 2507 is known as ¡°super duplex¡± due to its higher resistance to corrosion.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The 2205 was developed to provide excellent machinability. Control of composition and inclusion type improves chip formation and reduces tool wear, resulting in higher machining efficiency and lower tool costs.

ASTM A815 specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction. Class WP fittings are subdivided into four subclasses: Classes WP-S, WP-W, WP-WX, and WP-WU. The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products.
Teel Industry has grown in the past few decades and there are a variety of products available in the market. ASTM A815 UNS S32750 Pipe Fittings are one of those products and are available in various sizes, shapes, and dimensions. ASTM A815 UNS S32760 Pipe Fittings are designed to be resistant to corrosion and are said to have perfect weldability. These Super Duplex S32750 Buttweld Fittings are resistant to erosion corrosion and fatigue. They have a mixed microstructure of 50% austenitic and 50% ferrite.

The higher percentage of chromium in the alloy of duplex stainless steel seamless pipe makes it resistant to oxidation.

Super Duplex Stainless Steel is known to have better stress corrosion, cracking resistance and mechanical properties than any other type of steel.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The flanges shall not be used at temperatures over 600¡ãF [315¡ãC] since it may be subject to embrittlement after service at moderately elevated temperatures.

This category of material includes grades 2205, F51, F53, and F60. Duplex stainless has increased in popularity over the years due to its excellent chemical and mechanical properties versus their basic stainless counterparts, given especially that the cost differences are minimal now as the availability has increased.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Duplex describes a family of stainless steels that are neither fully austenitic, like 304 stainless, nor purely ferritic, like 430 stainless. The structure of 2205 duplex stainless steel consists of austenite pools surrounded by a continuous ferrite phase.

Duplex 2507 is a super duplex stainless steel designed for applications which demand exceptional strength and corrosion resistance.

Alloy 2507 has 25% chromium, 4% molybdenum, and 7% nickel. This high molybdenum, chromium and nitrogen content results in excellent resistance to chloride pitting and crevice corrosion attack and the duplex structure provides 2507 with exceptional resistance to chloride stress corrosion cracking.

2507 is used for oil and gas industry equipment, offshore platforms, heat exchangers, process and service water systems, fire-fighting systems, and injection and ballast water systems.

Duplex ( UNS S31803 / S32205 ) rods, also known as steel rods (ASTM A276 / ASTM A479 ), have excellent corrosion resistance. Stainless steel rods/stainless steel rods ( en 1.4462 ) are resistant to intergranular and crevice corrosion.

With an increased chromium content compared with F51 it offers improved pitting corrosion resistance.

Duplex 2507 (UNS S32750) is a super duplex stainless steel with 25% chromium, 4% molybdenum, and 7% nickel designed for demanding applications which require exceptional strength and corrosion resistance, such as chemical process, petrochemical, and seawater equipment.

ASTM A240 UNS S32760 Plate is a super duplex stainless steel alloy for specific applications.

We are a manufacturer of Stainless Steel Round Bar, Formed Steel and Rebar, we supply bars such as 304, 304l, 316, 316l and 347. We are proud to have the largest share of stainless steel forming steel in the country.

The steel has excellent resistance to chloride stress corrosion cracking, high thermal conductivity and a low coefficient of thermal expansion. The high chromium, molybdenum, and nitrogen levels provide excellent resistance to pitting, crevice, and general corrosion.

Both ASME B16.5 and ASME B16.47 have endorsed pipe flanges made from a series of duplex stainless steel grades.

The material for UNS S32760 Stud Bolts is about 10% lighter when compared to grade 316 stainless steel. The Stud Bolt S32760 demonstrates high performance at cryogenic temperature settings as well. Which means that the ASTM A1082 UNS S32760 has good sub-zero notch ductility properties down to a temperature of minus 50¡ãC.

ASME SA 479 UNS S32205 Fastener is a corrosion resistant and high strength super alloy that can be used in low temperature ranges up to 1300 degrees Fahrenheit.

Usage of Duplex 2507 should be limited to applications below 600¡ã F (316¡ã C). Extended elevated temperature exposure can reduce both the toughness and corrosion resistance of alloy 2507.

2507 Duplex Plate also exhibit better ductility and toughness compared to ferritic stainless steels, but they do not provide these properties as successfully as austenitic stainless steels.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Duplex 2205 is a chromium molybdenum blend which combines properties of both ferritic and austenitic steels.