253MA S31805 double stud bolt DIN933 931

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

One exception, however, are strongly oxidizing acids such as nitric acid. Alloys that contain molybdenum generally do not perform as well in these environments.?

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

316 stainless steel tubing austenitic popular with the name Chromium-Nickel austenitic alloy and is often referred to as a marine grade stainless steel because of its effective resistance to chloride corrosion in comparison to other stainless steel grades.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

It can be easily welded and processed by standard shop fabrication practices.

304 SS Weld Neck Flange
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

Annealing is a specific process of heat treatment that alters the properties of metal. While there are many different types of heat treatment, annealing is popular because it increases ductability and reduces hardness.

About 304 304L 304H pipe, stainless steel pipe is the lightest product and has structural support due to its versatility. This grade type is mainly ordered by customers. It has comparable strength, seamless design and machinability. Stainless steel has many beneficial properties such as corrosion resistance, ductility, high strength, etc. It has good thermal and electrical conductivity.

We can also manufacture 410, 430 and 440 stainless steel washers. We stock a variety of thicknesses and can customize gaskets to your unique needs. For 0.010 or thicker washers, we are stamped from full hard 301 stainless steel. Passivation, DFAR compliance and DFAR certification are available upon request.

2B-finish stainless steel does not stain, corrode, or rust as easily as regular steel, but it is not stain-resistant.

Environments that don¡¯t attack 304/304L stainless steel will normally not corrode 317L.

ASTM A453 Grade 660 bolts are alloys with relatively high nickel content. Stainless Steel ASTM A453 Grade 660 Grade D washer has excellent corrosion resistance but also excellent resistance to intergranular corrosion after welding or stress relief.

A flange is a ring of steel (forged, cut from plate, or rolled) designed to connect sections of pipe, or to join pipe to a pressure vessel, valve, pump or other integral flanged assembly. Flanges are joined to each other by bolts, and to the piping system by welding or threading (or loose when stub ends are used). Stainless steel flange simplified as SS flange, it refers to the flanges that made of stainless steel. Common material standards and Grades are ASTM A182 Grade F304/L and F316/L, with pressure ratings from Class 150, 300, 600 etc and to 2500. It used in more industries than carbon steel as stainless steel has better resistant performances on corrosion environment and always provides with a good appearance.

Alloy 254 SMO is a high end, molybdenum and nitrogen alloyed super austenitic stainless steel with low carbon content.

One tension test shall be made for each heat of ASTM A182 F51 flanges. One set of three Charpy V-notch tests shall be performed for each heat of products.

Type 304L stainless steel is a material used in severely corrosive conditions. Weld annealing is only required in applications with excessive stress loading. This steel grade exists in various commercial fields, especially in the chemical industry.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.48

The higher molybdenum content of Alloy 317L assures superior general and localized corrosion resistance in most media when compared with 304/304L and 316/316L stainless steels.

304/304L stainless steel pipe is used as stainless heat-resistant steel for food equipment, general chemical equipment, and atomic energy industrial equipment. The rust resistance of 304/304L stainless steel is stronger than that of 200 series stainless steel. High temperature is also better, can be as high as 1000-1200 degrees. 304 stainless steel has excellent corrosion resistance and good resistance to intergranular corrosion.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19

SAE 304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel. It is magnetic, but less magnetic than steel. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.[1]

A flange is a ring of steel (forged, cut from plate, or rolled) designed to connect sections of pipe, or to join pipe to a pressure vessel, valve, pump or other integral flanged assembly. Flanges are joined to each other by bolts, and to the piping system by welding or threading (or loose when stub ends are used). Stainless steel flange simplified as SS flange, it refers to the flanges that made of stainless steel. Common material standards and Grades are ASTM A182 Grade F304/L and F316/L, with pressure ratings from Class 150, 300, 600 etc and to 2500. It used in more industries than carbon steel as stainless steel has better resistant performances on corrosion environment and always provides with a good appearance.

ASTM A213 TP304 Stainless Steel Seamless Pipes are manufactured in a seamless process for use in high pressure environments, stainless steel TP304 grade is the most commonly used material due to its high strength and excellent corrosion resistance.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.30

304/304L is used almost exclusively for parts that need to be machined, welded, ground or polished, which also require good corrosion resistance. It is a good general purpose stainless steel grade. Good for corrosive environments such as paper and chemical industries and low temperature service. For use where corrosion resistance and good mechanical properties are the main requirements. 304/304L is widely accepted in the dairy, beverage and other food industries where the highest degree of hygiene and cleanliness is essential.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.45

SS 304 Fitting a kind of common stainless steel,it is generally utilized to create for the make of equipment and parts which needs great comprehensive erosion resistance, execution and formability.

AL-6XN (UNS N08367) is a 6% molybdenum, low carbon, nitrogen-bearing super-austenitic stainless alloy. The alloy was originally designed for seawater applications. AL-6XN? has also been successfully used in a broad range of very corrosive environments including the rapidly developing biopharm markets.

The solution annealing treatment is required prior age hardening / precipitation hardening. The single phase microstructure created during solution annealing is required prior to age hardening, such that only the precipitates formed during age hardening will be present in the final product. The composition, size, and quantities of those precipitates formed during aging will determine the final product’s hardness, strength, and mechanical properties after aging. It is critical that the structure be properly solution treated prior to aging in order to meet all of these requirements.

Stainless steel reducing tees are very practical in the oil, gas, water pipes, power plants, construction and food industries.

A wide variety of stainless steel flanges are all available at HT PIPE, including weld necks, slip-ons, threaded, socket weld, lap joints, blinds, and hub blinds.

With its high levels of chromium, molybdenum, and nitrogen, 6 Moly alloys have excellent resistance to a wide range of chemicals and are especially suited for high chloride environments such as brackish water, seawater, pulp mill bleach plants and other high chloride process streams.

We manufacture Stainless steel 304/ 304L pipe fittings for end-users such as marine engineering, chemical processing, hydro-carbon processing, heat exchangers, valves and pumps. and ship worldwide.

The molybdenum gives SS 316 better overall corrosion resistant properties than Stainless Steel 304, particularly higher resistance to pitting and crevice corrosion in chloride environments.