Stainless Steel 304 SO flanges

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

Type 316L stainless steel is chemically and mechanically very similar to Grade 316.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

Alloy 254 is an austenitic stainless steel alloy, whose chemical base consists of high amounts of molybdenum, chromium as well as nickel.

Stainless Steel Weld Fittings have a melting point of 1400 degrees C and an operating temperature of 870 degrees C.

Grades 309/309S are austenitic chromium-nickel stainless steels typically used in high temperature applications. Due to the high chromium and nickel content, grade 309/309S pipe is highly resistant to corrosion and has excellent resistance to oxidation. 309 Stainless Steel Threaded Rods are austenitic stainless steel threaded rods made from an alloy containing chromium and nickel. Stainless steel 309 threaded rod for low temperature service and highly corrosive environments. Additionally, 309 stainless steel has better corrosion resistance than 304 due to its higher nickel and chromium content. The alloy has been used in furnace parts, high temperature vessels, welding wire and fire box panels.

La tuberia 254 Smo se usa ampliamente en el tratamiento de agua de mar, procesamiento quimico, procesamiento de alimentos y produccion de petroleo. Tubo Smo 254 tambien se utiliza en sistemas de blanqueo de plantas de celulosa, desulfuracion de gases de combustion, lavadores y columnas de destilacion de tall oil.

It is an austenitic stainless steel alloy with high nickel (24%), chromium (22%), molybdenum (6%), and nitrogen (0.18%) content and is commonly known as superaustenitic stainless steel (alloys such as 254 SMO (UNS?S31254) and 904L (UNS?N08904) also fall under the superaustenitic designation) while 2205 (UNS S32305/ S31803) and 2507 (UNS S32750) are duplex and super duplex stainless steel, respectively.

AISI 904L stud bolts are manufactured to ASTM A182 F904L forged material. AISI 904L stud bolts are manufactured from ASTM A276/A276M and A479/A479M bar stock specifications. These stainless steel 904L stud bolts are constructed with dimensions referenced to various ASME/DIN/ISO/UNI/PN/BS and BIS standards. AISI 904L stud bolts are duly marked for traceability.

The austenitic structure of 316 stainless steel provides excellent toughness even at low temperatures.

Incoloy 925 flange provides good resistance to chloride ion stress-corrosion cracking.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Fittings are used to connect or end a pipe. An ASTM A403 WP304 Fittings is a type of austenitic grade fitting. SS Pipe Fittings can either be seamless or ERW. Stainless Steel 304 Pipe Fittings are made from seamless steel pipes whereas ERW pipes are made from ERW steel pipes.

Although both of these steels are considered low carbon steel alloys, they are quite different. For example, “L” stands for “low” in 316l stainless steel, meaning the alloy has a very low carbon content. The 316l variant is also more resistant to solder corrosion and can withstand higher temperatures than the 316. This is why 316l is often used in marine and architectural projects.

The difference between 304 and 304L stainless steel is that 304L has a .03 max carbon and is good for welding whereas 304 has a mid range level of carbon.

904L washers are made of a non-stabilized low carbon high alloy austenitic stainless steel. The addition of copper to this grade gives it greatly improved resistance to strong reducing acids, particularly sulphuric acid. It is also highly resistant to chloride attack ¨C both pitting / crevice corrosion and stress corrosion cracking. This grade is non-magnetic in all conditions and has excellent weldability and formability. The austenitic structure also gives this grade excellent toughness, even down to cryogenic temperatures. Due to its intrinsic anti-corrosive properties, 904L can be made into bolts, nuts, washers, studs, socket head cap screws, as well as a wide variety of other fasteners.

S32154 can be easily welded to other common austenitic stainless steels.

310S stainless steel has good high temperature resistance. When the temperature exceeds 800 [1], it begins to soften, and the allowable stress begins to decrease continuously. The maximum operating temperature is 1200 ¡ãC. Due to the high content of nickel (Ni) and chromium (Cr), it has good oxidation resistance, corrosion resistance, acid and alkali resistance, and high temperature resistance. After the content, the strength is improved due to its solid solution strengthening effect. The chemical composition characteristics of austenitic stainless steel are based on chromium and nickel with elements such as molybdenum, tungsten, niobium and titanium added. Therefore, it has high strength and creep strength at high temperature.

904L grade stainless steel is unlike any other steel. Due to its extra amounts of chromium, molybdenum, nickel and copper, 904L steel features superior resistance to corrosion, rust and acids.

One of the highly recommended and commonly used stainless steels in the market is stainless steel 304 304L 304H pipe. It contains elements such as nickel and chromium metals. It is basically called an austenitic steel and has electrical and thermal conductivity. This grade is known for its high corrosion resistance due to its ease of formation to size and shape.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.62

The flanges may be made from forgings, castings, or plates covering various types and classes of ASME B16.5 and ASME B16.47 (both Series A and Series B). Stainless steel 304/ 304L flanges of ASME B16.5 are available in Classes 150, 300, 400, 600, 900, 1500, 2500.

Stainless steel SS UNS S30400 Slip on Flanges is a high resistance corrosion steel and it is an austenitic stainless steel with superior resistance as compare to the type or grade 316l and type 317l. Due to addition of some elements this material display a brilliant corrosion resistance against reducing acids such as sulfuric acids. It is used in plants and widely used in various different kinds of applications.

253MA steel pipe flanges are typically designed for low pressure, non-circulating industrial applications. These 253MA flanges are typically used in low pressure conditions.

304 stainless steel is a category of stainless steel manufactured according to the specifications of the American ASTM.These 304L Stainless Steel Pipes and Tubes, also identified as UNS 30403, can be welded at a thickness greater than 304 or heated without the need for corresponding solution heat treatment for appreciable amounts of time above 500 ° C.

We are Manufacturer, Supplier and Exporter of Stainless Steel 304 Pipe Fittings with some amazing highlights such as strong, strong, flawless, high rigidity, corrosion resistant and this is just the beginning. Buy SS 304 Butt Weld Fittings from us at a reasonable cost. Significant consumption contrast, reduced carbon content, and high quality make 304 stainless steel butt welded pipe fittings amenable to the ability to weld where required.

The 316 stainless steel pipe bends can undergo processes, like cold forming and welding, where the austenitic crystal structure is transformed into ferromagnetic martensite. 316L steel is more susceptible to gaining some degree of magnetism.

For stainless steel 316 flanges, molybdenum is the element that gives them something special: enhanced rust resistance. Our SS 316 Threaded Flanges are a budget friendly option for small businesses.

A round bar is a cylindrical metal rod with a radius of 5 mm to 450 mm and a length of 2 to 6 meters. Bars and bars are also available in hexagonal and square shapes. One of them is UNS S32760 round bar, equivalent to Werkstoff NR 1.4410. It has a diameter of 10 to 100 mm, an ultimate tensile strength of 750 ksi and a minimum stress of 550 N/mm2.

SAE 304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel. It is magnetic, but less magnetic than steel. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.[1]

904L stainless steel bolts are non stabilised austenitic stainless steel bolts manufactured from alloy containing chromium, nickel, molybdenum and nitrogen with restricted carbon content. Stainless Steel 904L bolts are used for low temperature service and highly corrosive environments

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.