A182 F51 2205 S31803 flange ring with the minimum tensile strength 620MPa

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

ASTM A790 specified 2205 Stainless Steel Pipe ability to resist stress related corrosion cracking.

The steel has excellent resistance to chloride stress corrosion cracking, high thermal conductivity and a low coefficient of thermal expansion. The high chromium, molybdenum, and nitrogen levels provide excellent resistance to pitting, crevice, and general corrosion.

The primary difference between standard duplex grades and the Super Duplex Steel Flanges Material is that Super duplex has a higher content of both molybdenum and chromium their alloy.

For many applications where 300 series stainless steel is susceptible to chloride stress corrosion cracking, 2205 duplex stainless steel is a cost-effective solution. Stress corrosion cracking occurs when stainless steel is subjected to tensile stress while in contact with solutions containing chlorides. Elevated temperatures also increase the susceptibility of stainless steel to stress corrosion cracking.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.52

Due to the excellent physical and mechanical properties of Super Duplex, the quality of Super Duplex steel fasteners can meet the high demands of the gas, oil and marine industries.

Duplex2205 washers are dual phase austentic-ferritic duplex fasteners manufactured from alloy containing chromium, nickel alloy and molybdenum with restricted carbon content and minimum PREN35, SAF2205 fasteners have excellent corrosion resistance and high strength.

La tuberia soldada ASTM A790 UNS S32205 se fabrica para obtener una resistencia adicional. Los tubos soldados se laminan en caliente, mientras que los tubos sin costura se estiran en frio.Ambos pueden reforzarse aun mas mediante el trabajo en frio, pero hasta cierto punto.

The mechanical strength, corrosion resistance and low temperature toughness of the ASTM A182 F53 Flanges is higher than that of ordinary duplex stainless steels.

UNS S31803 Bolted Fasteners are used in marine, agricultural, chemical, construction, shipping, aviation, nuclear and industrial equipment.

2205 is the most widely used duplex (ferritic/austenitic) grade of stainless steel. It is used due to its excellent corrosion resistance and high strength. Over the years, many steel suppliers have made improvements to the standard duplex S31803 composition, and the resulting restricted composition range was recognized as UNS S32205 in 1996.

Las laminas duplex son grados austenitico-ferriticos con la misma composicion. Esta dise?ado para proporcionar laminas resistentes a la corrosion y de alta resistencia. Utiliza un mayor contenido de cromo hasta un 28%. La placa ASTM A240 UNS S32750 tiene un limite elastico minimo de aproximadamente 77 ksi y una resistencia a la traccion de al menos 730 MPa. Se estiro un 25% en estado recocido.

The formation of ASTM A479 duplex steel UNS S32205 tie rod consists of a pool of austenite surrounded by continuous ferrite phases. ASME SA 479 Duplex Steel UNS S31803 Tie Rods are hot worked in the temperature range of 1750¡ãF to 2100¡ãF. This is designed to reduce the depth used in fabrication, thereby reducing the weight of precise significance for items such as pressure vessels, structural functions, etc. As ASTM A479 dual phase steel for bridges, storage tanks, etc. UNS S32205 rebar has approximately twice the superior performance of SS 304 .

UNS S2750 Super Duplex Fasteners have good weldability and can be joined to itself or other materials by shielded metal arc welding, gas tungsten arc welding, plasma arc welding, flux cored wire or submerged arc welding.

ASTM A479 Super Duplex UNS S32750 F53 Heavy Hex Nuts are kept together by a combination of their threads’ friction (by means of slight elastic distortion), a small widening of the bolt, and solidity of the components to be held together.

Due to the alloy’s strong resistance to chemical compositions including acids, bases and neutral solutions, duplex steel uns s31803 nuts would be an ideal addition to these industries.

Super duplex steel fasteners have a metallurgical microstructure consisting of a mixture of ferritic and austenitic steels in equal proportions of 50-50.

This is the main reason why Super Duplex Flanges note an improvement of tensile strength over ferritic and austenitic steel grades.

The duplex stainless steel grade alloy UNS S32750 Washer is a thin plate, which is typically produced in a disk -shaped, although sometimes square shaped with a hole i.e. sometimes present in the middle.

Stainless Steel Duplex SAF 2205 Hex Bolts are used in machinery and construction and can be used with nuts or threaded holes. Since they can be tightened with a wrench, fully threaded hex bolts are specially designed to work more efficiently. Additionally, 2205 hex bolts are stronger than standard stainless steel, meaning they can be used for jobs that require high workloads and good corrosion resistance.

Duplex 2205 Tube may at times exhibit magnetic behavior because the microstructure of its alloy contains about 50% ferrite.

Duplex Stainless Steel offers excellent resistance to corrosion along with very high mechanical strength, which allows for lighter fabrication and greater design flexibility. With this high corrosion resistance, Duplex Stainless Steel provides more uptime than Carbon Steel or conventional Stainless Steel.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex steel UNS S31803 round bars are known as stainless austenitic-ferritic, with equal amounts of ferrite and austenite.

ASTM A240 UNS S32750 sheet is a type of steel known as super duplex steel.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Seamless Pipes also execute properties like high strength and resistance to corrosion from organic acids. Also, these Pipes can withstand inorganic acids and chloride environments.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex¡¯s premium mechanical and chemical properties are slightly offset by its difficulty in formability.

The machinability of 2205 steel pipe is low due to its high strength. The cutting speeds are almost 20% lower than that of grade 304.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

This alloy is especially useful in the -50¡ãF/+600¡ãF temperature range. For applications outside this temperature range, this alloy can also be considered, but there are some restrictions, especially when used in welded structures.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

The ASTM A790 Duplex 2205 Pipe produced under this specification are intended to be used for those applications where corrosion resistance is a primary concern.