S31254 Stainless Steel Flanges 254 SMO Socket Weld Flanges

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

While heat exchangers require moderate resistance to corrosion and good tensile strength as primary properties, the very versatile SS 304 efw pipe is able to cater to their needs without causing a dent in the buyer¡¯s pocket. Moreover, the Stainless Steel 304 erw pipe performs the functions rather effectively.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

300 series grade stainless steel is a chromium-nickel alloy that is manufactured into a range of products including stainless steel tubes and steel pipes. Both 304 and 316 steel pipe is durable enough to maintain its strength at high temperatures, resist corrosion, and is easy to maintain. The choice between material is highly dependent upon how you will use the pipe and the environment in which the pipe will be installed.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

ASTM A403 WP 316 Elbow covers the standard for wrought austenitic stainless steel fillers. These are used in pressure piping applications. SS 316 45 degree elbows and other 306 pipe fittings shall be performed using a variety of operations such as pressing, piercing, hammering, rolling, bending, upsetting, fusion welding, extrusion, machining, or the combination of two or more of these methods. combination.

Alloy 304 Studs (Din 1.4301 Studs) Stainless Steel UNS S30400 Studs are commonly used in the brewing industry such as pipes, fermenters, yeast trays, railway vehicles and warehouses. Due to the high work hardening rate of these alloy 304 studs, intermediate annealing may be required to successfully manufacture the part. These annealed grade 304 studs have better heat and corrosion resistance than Type 301 and 302 stainless steels, they are not very conductive or thermally conductive, and are non-magnetic.

One tension test shall be made for each heat of ASTM A182 F51 flanges. One set of three Charpy V-notch tests shall be performed for each heat of products.

904L (N08904, 14539) super austenitic stainless steel contains 14.0-18.0% chromium, 24.0-26.0% nickel, 4.5% molybdenum. 904L super austenitic stainless steel is a low-carbon, high-nickel, molybdenum austenitic stainless acid-resistant steel, which is a proprietary material imported from French H¡¤S Company. It has good activation-passivation transformation ability, excellent corrosion resistance, good corrosion resistance in non-oxidizing acids such as sulfuric acid, acetic acid, formic acid, phosphoric acid, and good corrosion resistance in neutral chloride-containing media Excellent pitting corrosion resistance, as well as good crevice corrosion resistance and stress corrosion resistance. It is suitable for various concentrations of sulfuric acid below 70 ¡ãC, and has good corrosion resistance in acetic acid of any concentration and temperature under normal pressure, as well as in the mixed acid of formic acid and acetic acid.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

HT PIPE lends over 20 years of industry knowledge to its unique selection of 316 stainless steel pipe fittings.

It can be easily welded and processed by standard shop fabrication practices.

Alloy 310 can be used in moderately caburizing, moderately oxidizing, nitriding, cementing and thermal cycling applications when not used at the maximum service temperature.

Stainless steel tube is typically specified as OD (outside diameter) and WT (wall thickness) and mechanical properties of the base stainless steel material. It is resistant to many forms of corrosion, has hygienic sterile properties, high quality aesthetic appeal and exceptional strength.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

A flange is a ring of steel (forged, cut from plate, or rolled) designed to connect sections of pipe, or to join pipe to a pressure vessel, valve, pump or other integral flanged assembly. Flanges are joined to each other by bolts, and to the piping system by welding or threading (or loose when stub ends are used). Stainless steel flange simplified as SS flange, it refers to the flanges that made of stainless steel. Common material standards and Grades are ASTM A182 Grade F304/L and F316/L, with pressure ratings from Class 150, 300, 600 etc and to 2500. It used in more industries than carbon steel as stainless steel has better resistant performances on corrosion environment and always provides with a good appearance.

316 can be annealed to resist weld decay.

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

The key elements in 304 are chromium and nickel, which give it excellent corrosion resistance. It has good corrosion resistance, is ductile and ductile, and has good weldability. The austenitic structure allows deep drawing without intermediate annealing.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.41

Stainless steel is an alloy of iron that is resistant to rusting. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen.
A stainless steel pipe system is the product of choice for carrying corrosive or sanitary fluids, slurries and gases, particularly where high pressures, high temperatures or corrosive environments are involved. As a result of the aesthetic properties of stainless steel, pipe is often use in architectural applications.

All in all, if you need superior corrosion resistance and your application contains water, then 316 steel is worth it. If not, 304 steel will suit your needs well.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.72

ASTM A815 specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction.

Inconel Pipes has good oxidation resistance in intermittent service to 870 Degree C and in continuous service to 925 Degree C. Inconel Round Pipes can be machined using conventional machining methods which are used for iron-based alloys.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

SAE 304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel. It is magnetic, but less magnetic than steel. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.[1]

SME B16.47 317L Pipe Flange hardenability will be reduced if constant feeds and low speeds are used. 317L Stainless steel Flanges can be welded using fusion and resistance methods. In Grade 317 Stainless Steel Pipe flange oxyacetylene welding method is not preferred for this alloy. ASTM A182 SS 317L Slip On Flange does not react to heat treatment. A182 F317/F317L Flange can be hardened by cold working.

Stainless steel 304 pipe fittings contain both chromium 18% – 20% and nickel 8% – 10.5%. It is an austenitic stainless steel and is less electrically and thermally conductive than carbon steel. It is a component that helps in change the direction of the flow such as tees and pipe bends.

304/304L stainless steel has strong corrosion resistance when the boiling point concentration of nitric acid is less than or equal to 65%. Alkaline solutions and most organic and inorganic acids also have good corrosion resistance. A high-alloy steel that can resist corrosion in air or chemically corrosive media, stainless steel has a beautiful surface and corrosion resistance, and does not have to wait for surface treatment through color, and exerts the inherent surface properties of stainless steel, commonly referred to as stainless steel. Represents the properties of high alloy steels such as 13 chrome steel and 18-8 chrome nickel steel.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Hardness and tensile strength can be increased by cold working, but modified by lowered carbon content providing good resistance to corrosion in welded construction where subsequent heat treatment is not practical.

316 Stainless Steel Characteristics
Type 316 stainless steel tubing is similar to 304, but with the addition of molybdenum, which improves the alloys corrosion resistance. The austenitic structure allows excellent toughness, even down to extremely low temperatures. These grades have excellent weldability, with or without the addition of filler metal. 316 / 316L stainless tube is available as round, square or rectangular shapes. It is available as welded and seamless. It contains additional molybdenum and nickel than 304 stainless, which increases corrosion resistance of the metal. Decreased weldability is exhibited in 316L alloys due to increased carbon in the alloy. It is used for tube in more aggressive environments than 304 tube.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

The lower carbon content in 316L minimizes harmful carbide precipitation from welding (carbon is drawn out of the metal and reacts with chromium when heated, impairing corrosion resistance). Therefore, 316L is used when welding is required to ensure maximum corrosion resistance.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.58

Incoloy 925 Blind Flanges are also being offered in different sizes and shapes to our customers. Incoloy 925 Socket Weld Flanges is produced by a vacuum re ¨C melt process, but can be supplied using an air melt single consumable electrode practice if the material specification allows.

A403 WP304 Pipe Bends can be welded easily however, the material may face localized corrosion due to intergranular corrosion risk.

Grade 316 is also primarily composed of iron, and again contains significant amounts of nickel and chromium¡ª10-14% and 16-18%, respectively¡ªand small amounts of carbon, manganese, molybdenum, and silicon. For this reason, grade 316 stainless steel is often preferred for use in marine environments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.67