S31803 fasteners 120/105 ksi minimum tensile strength duplex bolt

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

El uso de tuberias sin costura ASTM A790 UNS S32205 (sin costura y soldadas) es adecuado para aplicaciones generales, pero la solucion principal que brindan es el agrietamiento por corrosion relacionado con la tension.

S32750 is used for marine applications, flue gas scrubbing equipment, and pulp & paper mill equipment.

Duplex stainless steel is designed to combine improved resistance to stress corrosion cracking (including sulfide stress corrosion cracking), pitting, crevice corrosion and high strength when compared with other stainless alloys.

The origin of Duplex steels can be traced back to the 1920s, with the first cast being made in Sweden in 1930. However, the popularity of using duplex only started to rise around 30 years ago when steelmaking technology became more advanced. The two types of metals used to make Duplex ¨C austenitic and ferritic ¨C are both fit for purpose in many types of scenarios but they both have weaknesses that prevent them from being used more widely.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

ASTM A479 Duplex Steel UNS S32205 Round Gaskets are nitrogen reinforced duplex alloys formed to address common corrosion problems found incidentally with 300 series alloys. ASME SA 479 Duplex Steel UNS S31803 Machined Washers are hardened at 1868 to 1958 degrees Fahrenheit and then water quenched.

2205 flange has good general corrosion resistance, high resistance to chloride stress corrosion cracking, as well as pitting and crevice corrosion.

Designers may have the option to reduce the wall thickness of the duplex 2205 welded pipe, because of its high yield strength. The yield strength of this material is almost two times that of the usually used austenitic stainless steel grade. Unlike austenitic steel pipe, the Duplex 2205 Tube may at times exhibit magnetic behavior because the microstructure of its alloy contains about 50% ferrite.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

2507 has Combination of properties given by austenitic and ferritic structure, and Good weldability and workability.

The material is also resistant to chloride stress corrosion cracking, to erosion corrosion, to corrosion fatigue, to general corrosion in acids. This alloy has good weldability and very high mechanical strength.

Super Duplex 2507 stud bolts (EN 1.4410) are made of a stainless steel alloy containing 25% chromium, 4% molybdenum, and 7% nickel. Duplex 2507 is known for its high strength and excellent localized corrosion resistance to chloride.

SA 815 S31803 Weld Fittings have exceptional chemical properties along with higher strength and good resistance to corrosion. Therefore this grade is used for fitting manufacturing. SA 815 S31803 Long/ Short Radius Elbow display outstanding resistance to pitting, crevice corrosion and have excellent weldability. They are perfect if one is looking for a sturdy pipe with good formability. ASME B16.9 WPS UNS S31803 Elbow also exhibits excellent resistance to acetic and marine environments.

Compared to conventional stainless steels, duplex steel pipes guarantee higher resistance to pitting and stress corrosion cracking. Meanwhile, our ASTM A 789/A 790 Duplex Steel Pipes and Tubes are available in different sizes, gauges and thicknesses according to customers’ customized requirements.

Stub ends are used with lap flanges. Metline is an ISO certified, PED approved duplex 2205 stub end manufacturer and supplier with a manufacturing base in India. We can supply both long and short ends (collars) with test certificate according to EN10204 3.1.

2507 has good weldability and workability, and it’s widely used in desalination equipment, chemical process pressure vessels, piping and heat exchangers.

The raised face allows for the flange to have more bolt holes and connection surface while the welded neck grips the pipe in place. The applications are oil and gas, petroleum, petrochemical and other industrial applications.

Duplex steel flange also offers Good weldability and workability, High energy absorption and Low thermal expansion.

Duplex 2205 stainless steel (ferritic and austenitic) is widely used in applications requiring good corrosion resistance and strength. UNS S31803 grade stainless steel was modified several times to form UNS S32205, which was approved in 1996. This grade offers higher corrosion resistance.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.60

These super duplex UNS S32760 round bars are available in a variety of shapes, sizes and diameters depending on the needs and requirements of the application and customer supplied specifications. These super duplex UNS S32760 round bars are resistant to localized corrosion.

2507 (UNS S32750) is a super duplex stainless steel designed for applications which require exceptional strength and corrosion resistance. 2507 is a 25% chromium, 4% molybdenum, and 7% nickel alloy resulting in excellent resistance to chloride pitting and crevice corrosion attack.

A182 F51 Duplex stainless steel composed of 21% chromium, 2.5% molybdenum and 4.5% nickel-nitrogen alloy. It has high strength, good impact toughness and good overall and local stress corrosion resistance.

Supler Duplex Steel UNS S32760 stud bolt has a higher yield strength and lower ductility than the austenitic steels so fabricators may find that higher forming forces, increased radius of bending, and increased allowance for spring-back are necessary.

UNS S31803 Bolted Fasteners are used in marine, agricultural, chemical, construction, shipping, aviation, nuclear and industrial equipment.

This category of material includes grades 2205, F51, F53, and F60. Duplex stainless has increased in popularity over the years due to its excellent chemical and mechanical properties versus their basic stainless counterparts, given especially that the cost differences are minimal now as the availability has increased.

2205 fasteners are widely used in applications requiring good corrosion resistance and strength. Has excellent corrosion resistance; much higher than other grades. It eliminates localized corrosion types such as intergranular corrosion, pitting corrosion and crevice corrosion. Duplex 2205 bolts are ideal for environments containing chlorides and hydrogen sulfide for oil and gas extraction from sour wells, refineries, and chloride-contaminated process solutions.

Super Duplex UNS S32750 bar has excellent resistance to stress corrosion cracking in chlorine containing environments. After heating to a solution treatment temperature of 1080¡ãC to 1120¡ãC, quenching is required.

It is a tee fitting with two outlets at a 90¡ã junction to the main line.

UNS S32205 dual-phase steel round bar has excellent resistance to chloride stress corrosion cracking, high strength, can withstand brackish water or salt water impact, and high surface toughness.

The primary difference between standard duplex grades and the Super Duplex Steel Flanges Material is that Super duplex has a higher content of both molybdenum and chromium their alloy.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

The combination of the ferritic phase and austenitic phase provides both high strength and excellent corrosion resistance.