316 1.4401 hex bolt and nut stainless steel hex bolt

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

Stainless Steel Pipe Bends are resistant to atmospheric corrosion and prevent the internal fluid from getting contaminated.

UNS S31600 316 SS Blind Flange
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

The addition of copper to this grade gives it better corrosion resistance than conventional chromium-nickel stainless steels, especially against sulfuric, phosphoric and acetic acids. However, the use of hydrochloric acid is limited.

ASME SA 182 AS Forged Pipe Flanges are forged from a single piece of raw material for good strength. Some applications need to end pipes instead of connecting more pipes. A182 Alloy Steel Blind Flanges are used for permanent or temporary closure of pipelines. Flanges can be welded or bolted.

SS 304 316 SO RF BLRF Flanges
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

Type 316 alloy is considered suitable for some marine environment applications, such as ship rails and hardware, and the exterior walls of buildings near the ocean that are exposed to salt spray. Type 316 stainless steel shows no evidence of corrosion in the 100-hour, 5% salt spray (ASTM-B-117) test.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

The most advantageous feature of welded joints such as A403 is that they provide additional grip and greater strength at the welded joint. This grade has different types of accessories. There are connectors, elbows, unions, elbows and reducers. All these accessories have their own special applications.

HT PIPE stocks seamless and welded 304/304L stainless steel pipe. This grade of steel is the most widely used grade due to its resistance to corrosion and oxidation. Some of the benefits of choosing this material for piping include its low maintenance costs, ability to withstand harsh environments, and weldability. Type 304 and 304L stainless steel pipes perform well in high temperatures and harsh environments. This type of steel is very durable and can be used in a wide range of applications and industries.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.27

Like steel, 316 stainless steel is primarily composed of iron and carbon. However, stainless steel also contains at least 10.5% chromium, a metallic element that imparts a metal surface finish and excellent corrosion resistance. Stainless steel is ideal for long-term applications that will be exposed to elements, moisture and potentially corrosive chemicals. It is also ideal for sensitive industries such as food preparation and pharmaceuticals, as the risk of contamination is much lower.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

SAE 304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel. It is magnetic, but less magnetic than steel. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.[1]

B16.5 304L 316L Forged Stainless Steel Flange
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

Grade 1.4404 or 316L is an austenitic stainless steel AISI 316 with very good corrosion resistance due to its high chromium and molybdenum content and low carbon content. Its strength in the hardened state is about 600 MPa for large diameters, but for small sections, the strength can be increased by cold working.

Common uses for Type 316 stainless steel include the construction of exhaust manifolds, furnace components, heat exchangers, jet engine components, pharmaceutical and photographic equipment, valve and pump components, chemical processing equipment, tanks and evaporators. It is also used in pulp, paper and textile processing equipment and any components exposed to the marine environment.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.57

ASME B16.9, ASME B16.28. These Stainless steel 304/ 304L tube/pipe fittings have special quality finishing and duress for long life, high pressure and zero defects.

Stainless steel 1.4529 HCR is characterized by a high resistance to localized corrosion phenomena such as crevice corrosion, pitting corrosion or chlorine-induced stress corrosion cracking. It also exhibits excellent mechanical properties and can be used over a wide temperature range. It has excellent elasticity and abrasion resistance in contact with sulfuric or phosphoric acid, or chlorides and salts.

253MA steel pipe flanges are typically designed for low pressure, non-circulating industrial applications. These 253MA flanges are typically used in low pressure conditions.

Stainless Steel Blind Flanges are mostly used to seal the end or opening of a pipe, which is why they come without a bore. This comes in handy for inspection and pressure tests, as it allows quick access to the pipe.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Incoloy 926 is also resistant to chloride stress corrosion, with good corrosion resistance in both oxidizing and reducing media.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

HT PIPE’s 304/304L stainless steel pipe meets industry standards and specifications. Our ASTM A312 and ASME SA312 stainless steel pipe products are high quality, durable and suitable for a wide range of applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.29

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Class designations are also utilized to indicate the nondestructive test method and extent of nondestructive examination. A general summary of the fitting classes applicable to all WP grades of stainless steel follows. There are no classes for the CR grades.

Round bars are long cylindrical metal raw materials that are used in different industries. 254 SMO round bar is an austenitic stainless steel. These bars have good nickel, chromium and molybdenum chemistries. This makes these bars resistant to oxidation and all forms of corrosion.

In the ore form, the concentration of carbon exceeds the level required for the unique properties of the steel. Therefore, steelmakers reprocess the molten metal to reduce the carbon content to the desired amount.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Incoloy 926 Stainless Steel Flange has Improved the stability of metallurgical compared to a range of 18% of the nickel content alloys.

Our high quality stub end A-type stub end butt welded joints are tested and proven for durability, accuracy and precision. ANSI B 16.9 Stub End is widely used in plumbing engineering to connect different types of pipes.