Incoloy 800HT Elbows Nickel-iron-chromium Alloy Pipe Fittings

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Due to its high strength and stiffness properties, Inconel 800 is an alloy that is ideal for demanding applications including the marine engineering, aerospace, and chemical processing industries.

As an austenitic and nickel-based alloy, Alloy 926 nuts are ductile over a wide temperature range from low temperatures to over 1000 degrees Fahrenheit (538 degrees Celsius). Machinability is typical of nickel-based alloys, with alloy 926 bolts that can be easily welded and formed using a variety of techniques.

Incoloy 800 Bolts and Incoloy 800HT Bolts can be easily welded and machined through standard shop fabrication practices. However, due to the high strength of the alloys, they require higher power process equipment than standard austenitic stainless steels. Meanwhile, Incoloy 800 fasteners are iron, nickel and chrome alloy fasteners. It has excellent resistance to oxidation and carburization at soaring temperatures. They remain very stable at extreme temperatures and retain their austenitic structure.

Inconel 926 bolt material meets ASTM B446, B564, F467, F468, UNS N06926, DIN EN 2.4856, AMS 5666 and BS 3076 specifications and is adequate for high strength, corrosion resistance and high temperature applications up to 1000o C (1800o F).

Typical applications of Inconel 800 include the food and beverage industry, in addition to being used for heat treatment components.

Incoloy 800H is an iron-nickel-chromium alloy having the same basic composition as Incoloy 800, with significantly higher creep-rupture strength.

The higher strength results from deliberate control of the carbon, aluminum, and titanium contents in conjunction with a high-temperature anneal.

Additionally, the alloy’s properties make it an excellent choice for sea-water applications, including freedom from local attack (pitting and crevice corrosion), high corrosion-fatigue strength, high tensile strength, and resistance to chloride-ion stress-corrosion cracking.

ASTM A564 Nickel 200 Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Alloy 800H 800HT are two individual solid solution strengthened, iron nickel chromium alloys. They are typically o?ered as one, dual certi?ed alloy, meeting the chemical composition requirements of both alloys.

Inconel 725 bolt material meets ASTM B446, B564, F467, F468, UNS N06725, DIN EN 2.4856, AMS 5666 and BS 3076 specifications and is adequate for demanding strength, corrosion resistance and high temperature applications up to 1000o C (1800o F).

Alloy 800 Coils are also used in extruded tubing for ethylene and steam methane reformers. The higher creep rupture strength of the Nickel 800 sheet is a result of the aluminum, carbon and titanium content.

HT PIPE is a leading supplier of Alloy 800 and other high-quality special metal alloys with decades of experience and extensive specifications.

Incoloy 800HT ASTM B564 Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 800HT / Incoloy 800HT is a controlled composition derivative of INCOLOY alloy 800H (UNS N08810) and is used for the same creep resistant applications, however the combined effects of mechanical and thermal processing of the alloy permit higher design stresses to be incorporated than are permitted for the conventional alloy.

Gold 926 fasteners are also similar in composition to 904L, but with the addition of nitrogen and molybdenum, resulting in alloy 926 bolts with improved general corrosion resistance as well as pitting and crevice corrosion resistance. Because Alloy 926 is resistant to chloride stress corrosion cracking, it makes 926 fasteners ideal for desalination, pulp and paper mills. This alloy is also ideal for dilute sulfuric and phosphoric acid applications.

Known as a heat-resistant alloy, Inconel 825 has excellent properties. The most interesting properties of Incoloy 825 fasteners are their high creep resistance and high mechanical strength despite prolonged exposure to heat. The importance of these attributes in particular is considered critical across multiple industries. Therefore, the use of ASTM B425 UNS N08825 bolts is often associated with industries such as pollution control equipment, oil well and gas gathering, and chemical processing.

SB564 UNS N02200 Flange The Nickel alloy 200 has some excellent properties, which have made it quite famous in various industries. The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment. We are a specialized Nickel 200 Flange Manufacturer In China who produces the flanges of the given grade in different shapes and sizes, according to the dimensional requirements of the client. Our experienced team of professionals supervises the process of manufacturing Nickel 200 Slip On Flanges to ensure they have the correct dimensional accuracy and quality. They also conduct certification tests to ensure the product’s condition before delivering it to the customers.

ASTM B564 Nickel Alloy 200 Threaded Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Incoloy 825 is stable annealed at 940°C. The softest structure was obtained at 980°C. Sections heavier than sheet, strip and wire should be quenched to avoid sensitivity.

Incoloy 800 Sheets are a combination of nickel, chromium and iron alloys with advantages and properties such as excellent oxidation resistance, high temperature carburization and medium or high strength and excellent resistance to name a few.

The Incoloy 800Ht Pipe is a slight modification to the 800H alloys. In these pipes the combined titanium and aluminum levels allow the pipes to work at slightly higher temperatures than the 800h alloys. Both these alloys can be dual certified and are preferred for use in high-temperature setups.

ncoloy 800H Forgings have good strength and excellent resistance to oxidation, sulfidation and carburization at elevated temperatures.

Grade 1.4529 is a high alloy stainless steel of austenitic structure and can be classified as a nickel alloy (by US standards). Delivered in a supersaturated condition, it exhibits resistance to intergranular corrosion, pitting and stress corrosion, salt, seawater, chlorides, sulfuric acid, phosphoric acid, and other highly concentrated liquid and gaseous corrosive chemicals. At the same time, nickel and nitrogen can not only improve the stability, but also reduce the tendency of separation of crystallization thermal process or welding process is better than the nitrogen content of nickel alloy. 926 has some corrosion resistance to chloride ions due to its localized corrosion characteristics and 25% nickel alloy content.

AS1210 Prequalified Incoloy 800 can be used at 800¡ãC. ASME codes allow Incoloy 800 to 815¡ãC, and Incoloy 800H and 800HT to 982¡ãC.

Alloy 926 is a super austenitic molybdenum stainless steel with excellent resistance to a variety of highly corrosive environments. The combination of molybdenum and nitrogen in its composition resists pitting and crevice corrosion, while copper improves sulfuric acid resistance, while nitrogen increases yield and tensile strength.

Bolts made from Alloy 926 are a super austenitic molybdenum stainless steel with comparable corrosion resistance to Super Duplex 2507, but with slightly lower strength and cost. Chemically nearly identical to 6-molybdenum alloys AL6XN and SMO 254, alloy 926 is commonly used in paper mills, desalination and mild acid environments.

Incoloy 800HT, also known as ¡°Alloy 800HT¡±, is designated as UNS N08811 or DIN W.Nr. 1.4959. It is an iron-nickel-chromium alloy having the same basic composition as Incoloy 800 and Incoloy 800H but with significantly higher creep-rupture strength.

A Inconel 800H Seamless Pipe is designed by passing hot steel billets through an extruded metal grade to shape them precisely.