347H Plate Supplier Stainless Steel 347H 2B Finish Plates

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

Titanium’s density is about 60% that of stainless steel and nickel alloys, this weight saving makes it a popular choice in applications where this is critical such as aerospace.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Because Inconel 718 alloy maintains good corrosion resistance and excellent oxidation resistance, SB670 Inconel 718 strip can be used in parts requiring high creep and stress rupture resistance up to 1300¡ãF and oxidation resistance up to 1800¡ãF temperature range.

ASTM A350 LF2 flanges are used in intensive application industries such as light and heavy chemical manufacturing plants.

It is used in flue gas desulfurization systems because of its excellent resistance to sulfur compounds and chloride ions encounted in most scrubbers.

Monel 400 is essential in heat exchangers, chemical plant equipment, and boiler feeders. It is ideal in wire or rod form and is excellent for trolling wire due to its resistance to seawater.

The yield strength is also higher, allowing component designers to reduce section size for load-bearing applications.

ASTM A105 fittings possess a minimum tensile strength of 485mpa with a minimum yield strength of 250mpa. These fitting can be elongated by 22% and possess a hardness of 137 to 187 HBW. Our company is an ASTM A105 Forged Fittings manufacturer in India who make use of top-of-the-line technology to produce the best components in the industry. These coupling can be half or fully coupled. The Full Coupling A105 is employed in connecting small bore pipes. It is utilized in connecting a pipe to another pipe or to a swage or nipple. A105 Half Coupling is utilized for smaller bore branching from a large pipe bore. These couplings can be threaded and welded. A105 Threaded Coupling is preferred in applications where stress on the system is less. We are exporter and manufacturer of Carbon Steel A105 grade for forged pipe fittings.

A105 carbon steel round bars contain carbon, manganese, phosphorus, sulfur, silicon, copper, nickel, chromium, molybdenum and vanadium.

Inconel gaskets, such as Inconel 600, 601, 625, 686, 718 and 725 gaskets, are a family of nickel-chromium-molybdenum alloys for high strength and good corrosion resistance at elevated temperatures. Due to its high thermal stability, Inconel can be used in operating temperatures from cryogenic to 2200¡ãF (982¡ãC). There is almost no corrosion to Inconel gaskets in mild environments such as atmosphere, seawater, neutral salt, and alkaline media. Because the high alloy content of Inconel gaskets enables them to withstand a variety of severe corrosive environments. In more severe corrosive environments, the combination of nickel and chromium provides resistance to oxidizing chemicals, while high nickel and molybdenum contents provide resistance to non-oxidizing environments.

The key to the P5 composition of chromium-molybdenum alloys is the addition of chromium and molybdenum. Chromium or chromium increases high temperature strength, increases oxidation resistance and increases tensile, yield and hardness at room temperature. Molybdenum improves strength, elastic limit, wear resistance, impact quality and hardenability. It increases resistance to softening, inhibits grain growth, and makes chrome steel less susceptible to embrittlement. Molybdenum is also the most effective additive for increasing high temperature creep strength or creep resistance. It also enhances the corrosion resistance of the steel and inhibits pitting corrosion.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P107

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

We consider providing the same to them in different specifications, standards, sizes, dimensions, pressures, classes. It is also fabricated and offered to the clients at custom-cut and made specifications so any special application demands can be very well satisfied.

Hastelloy C-276 has a higher molybdenum content.

316L elbow is particularly useful in severe corrosive conditions as it is non-magnetic and austenitic stainless steel. It offers brilliant resistance to oxidation and pitting. Pipe Fittings SS 316 /316L is ideal for many industrial processes that require a high resistance in harsh environments. These tubular fittings can withstand many acidic solvents, chemicals as well as chloride pitting. We are widely known for delivering products according to our esteemed customers’ urgent requirements.

Duplex 1.4462 round bars also have low thermal expansion and high thermal conductivity as well as high corrosion and erosion fatigue properties compared to austenite. The corrosion resistance of duplex 2205 is almost twice that of other austenitic stainless steels.

Inconel Alloy 718 is designed to exhibit excellent high yield strength, tensile strength and creep rupture properties at temperatures up to 1300¡ãF.

The use of modular construction is directly influenced by the client¡¯s requirements for speed of construction, quality, added benefits of economy of scale, as well as single-point procurement.

SAE 304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel. It is magnetic, but less magnetic than steel. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.[1]

A weld neck flange, also called a tapered hub flange or high-hub flange, is a kind of flange that can relocate stress to the pipes, ensuring a decrease in high-stress concentration at the bottom of the flange.

310 and 310s are used in power generation applications; used in gas generator trims, pulverized coal burners and pipe hangers. Sinter plants and cement plants also take advantage of the properties of this stainless steel sheet in burners and burner shrouds, feed, discharge systems and wind boxes.

AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

Bright Annealed (BA) is produced by heat-treating (annealing) steel with a controlled atmosphere furnace. After heat-treatment, the steel has a reflective, mirror-like appearance, but may also have some imperfections and cloudiness. BA stainless steel can be buffed to attain a more reflective finish, and is often specified for applications where a highly reflective surface is desired.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

En comparacion con los aceros austeniticos estandar, los valores de diseno permitidos para el tubo 254 Smo son un 50 % mas altos. Se dice que ASTM A312 Uns S31254 es una alternativa rentable a las aleaciones a base de titanio y niquel.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

Stainless steel also contains varying amounts of carbon, silicon and manganese. Other elements, such as nickel and molybdenum, can be added to impart other useful properties such as enhanced formability and enhanced corrosion resistance.

We produce 90/10 Cu-Ni butt welded pipe fittings that are easy to weld, easy to manufacture and inherently resistant to biofouling.

Duplex stainless steel offers excellent resistance to corrosion and very high mechanical strength. The high corrosion resistance of duplex stainless steel ensures significantly more uptime than carbon steels and conventional stainless steels, while the mechanical strength allows for lighter constructions, a more compact system design and less welding.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

ASME SA 182 AS Forged Pipe Flanges are forged from a single piece of raw material for good strength. Some applications need to end pipes instead of connecting more pipes. A182 Alloy Steel Blind Flanges are used for permanent or temporary closure of pipelines. Flanges can be welded or bolted.

Applications and Materials
Normalizing is mainly used for normalizing the structure of carbon steel and low alloy steel after forging, hot rolling or casting. The hardness obtained after normalizing depends on the steel dimensional analysis and the cooling rate used (approximately 100-250 HB).

Hastelloy B2 prevents the formation of grain boundary carbide precipitates in the weld heat affected zone, making it suitable for most chemical process applications in the as-welded condition. The heat affected weld zone reduces the precipitation of carbides and other phases to ensure uniform corrosion resistance.
Alloy B2 also has excellent resistance to pitting and stress corrosion cracking.