50mm steel round bar

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Round bars are cold drawn and annealed, available in stock lengths or cut to size. Alloy round bars provide strength and corrosion resistance in a variety of environments and can be used in the frame, machine part manufacturing, food service and medical device industries.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Inconel 600 is a nickel-chromium-iron alloy with excellent corrosion resistance, oxidation resistance and high strength at elevated temperatures. Due to its high nickel content, Inconel 600 is extremely resistant to chloride ion stress corrosion cracking. Age hardening is not required as Inconel 600 is hardened and strengthened by cold work only. The Inconel 600 can operate in temperatures as low as 700¡ãF (370¡ãC).
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Nickel 200 is a solid solution strengthened metal. Nickel 200 Bar Stock contains 99.6% wrought nickel by weight and is considered commercially pure nickel. DIN 2.4066 Bar has good mechanical and physical properties. For example, ASTM B160 N02200 has excellent resistance to many corrosive compounds as well as corrosive environments. Meanwhile, Nickel 200 is a solid solution strengthened wrought alloy that can be designed as round bars and rods. These two components are used interchangeably and can be distinguished from certain key functions.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

High nickel content ensures resistance to stress corrosion cracking, combined with molybdenum and copper provides strong resistance to reducing environments such as sulfuric and phosphoric acid, chromium to resist oxidizing environments such as nitric acid, titanium to inhibit intergranular corrosion, and overall resistance to pitting and crevice corrosion.

70/30 Copper Nickel round bar has a pressure class of 200 or standard.

Inconel 718 is an alloy composed of nickel and chromium.

Incoloy Alloy 800H/800HT round bar has excellent resistance to carburizing, oxidation and nitriding. They are not prone to embrittlement even after extended operation at temperatures up to 12000F to 16000F.

Hastelloy G30 is a nickel-based alloy with a high chromium content that provides superior corrosion resistance to commercial phosphoric acid and many highly oxidizing acid media.

Inconel 718 (also known as UNS N07718) is a precipitation hardening nickel superalloy with excellent corrosion resistance and strength as well as high weldability.

Inconel 625 Bars For excellent machinability, these bars are equipped with low cutting speeds, heavy equipment, ample coolant, rigid workpieces and tooling. One thing to keep in mind about these bars is that it does work harden quickly, so intermediate annealing can be used for complex part forming operations.

Acknowledged with its best corrosion resistance and resistance to impingement attacks at high temperatures and pressures among other copper alloys, plus its good resistance to biofouling, C71500 round bar are just the ones for you!

Alloy 400 is a solid solution of gold that can only be hardened by cold work. The nickel alloy has good corrosion resistance, good weldability and high strength

Stainless steel is a versatile alloy is considered to be amongst the most widely used metals across the world.Stainless Steel A403 WP304 contains higher chromium and low carbon content.

Incoloy 825 alloy is a chromium, nickel, iron based alloy in addition to copper and molybdenum. It has strong resistance to redox acid and stress corrosion cracking. In addition, it is completely resistant to pitting, abrasion and erosion. In addition, it is completely resistant to phosphoric and sulfuric acid. All of this has prompted manufacturers to use Incoloy alloys when making Incoloy 825 bar. In addition, the product has higher tensile strength, flexibility, durability and durability. Incoloy 825 bar has good dimensional accuracy, strong construction and excellent surface finish to withstand heavy loads and maintain high temperatures.

Like other nickel alloys, HASTELLOY C-22 alloy is fairly ductile, has excellent weldability, and is easily fabricated into industrial parts. It is available in sheet, sheet, strip, billet, bar, wire, tube and tube. Typical applications may include: reactors, heat exchangers and columns.

Hastelloy G30 Hastelloy alloy is widely used in phosphoric acid equipment, sulfuric acid equipment, nitric acid equipment, nuclear fuel reprocessing

Inconel 718 round bar is a nickel-chromium alloy bar with up to 55% nickel in its composition. Contents include 17% chromium, 4.9% niobium, 6.6% iron minimum and aluminum, boron, carbon, cobalt, copper, manganese, phosphorus, lead, sulfur and silicon. The material has an ultimate tensile strength of 1375 MPa and a minimum yield strength of 1100 MPa.

C71500 round bar are just the ones for you! Cupronickel is highly resistant to corrosion by salt water, and is therefore used for piping, heat exchangers and condensers in seawater systems, as well as for marine hardware.

Nickel 201 round bars can be found in hardened and tempered forms. It is a commercial unalloyed nickel with excellent corrosion resistance and very low electrical resistivity. These alloy 201 round bars are resistant to the corrosive effects of most media and are immune to severe corrosion types such as pitting and crystallites intercorrosion. Due to the low carbon content of Nickel 201 Flat Bar, LC-Nickel 99.6 exhibits high resistance to caustic-induced corrosion even at high temperatures.

The outstanding characteristic of Inconel 600 is its resistance to high-temperature oxidation.

Inconel 718 is a chromium and nickel based alloy with additional amounts of titanium, niobium, iron, molybdenum and aluminum. This alloy has high mechanical strength and durability to withstand extreme environmental conditions. Inconel 718 round bar has excellent resistance and solderability. These bars have excellent overall corrosion resistance in high temperature and high pressure applications.

Alloy 625 is a nickel-chromium alloy with high strength, excellent machinability and excellent corrosion resistance. Operating temperature ranges from cryogenic to 1800¡ãF. The strength of Alloy 625 is derived from the hardening effect of molybdenum and niobium on its nickel-chromium matrix; therefore, precipitation hardening is not required. This combination of elements also provides excellent resistance to a variety of unusually severe corrosive environments as well as high temperature effects such as oxidation and carburization.

Inconel 718 can be described as a nickel-chromium alloy containing molybdenum, niobium, iron and very small amounts of titanium and aluminum. Inconel 718 round bars are strong and they also show remarkable yields.

Monel K500 steel bars are particularly suitable for centrifugal pumps in the marine industry. This is due to the properties of Monel N05500 hot rolled bar, namely high tensile strength and low corrosion rate in high velocity seawater.

Nickel 201 is a solid solution strengthened, commercially pure wrought metal. ASTM B160 UNS N02201 has good mechanical properties and is stable over a wide temperature range. A feature of Nickel 201 is its excellent resistance to many corrosives. This is especially true for hydroxides. Nickel 201 alloy is a modification of Nickel 200. ASTM B160 Nickel 200 Rod (UNS N02200 Rod) and ASME SB160 Nickel 201 Rod (UNS N02201 Rod) can be used in a variety of applications such as food processing equipment, marine and marine engineering, salt production, caustic processing equipment, manufacturing and processing hydroxide Sodium (especially at temperatures above 300¡ãF), reactors and vessels that produce fluorine and react with hydrocarbons.

Nickel UNS N02200 Rod is a ferromagnetic, commercial purity (99.6%) metal product that exhibits good mechanical properties over a wide temperature range, along with high ductility and resistance to a variety of metals including hydroxides. Excellent resistance to corrosive materials. Nickel 200 alloy bars also showed good hardness levels, about the same as annealed mild steel. Additionally, Nickel 200 round bars can be found in hardened and tempered forms. It is a commercial unalloyed nickel with excellent corrosion resistance and very low resistivity. It also has other properties such as weldability, formability and high tensile strength.

Steel bars are widely used in industrial maintenance, farm implements, transportation equipment, decorative iron products, fences, artwork, etc. This steel shape is easy to weld, cut, form and drill with the proper equipment and knowledge.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

The Monel400 bar is a nickel-copper alloy (about 67% ni-23% Cu) that is resistant to seawater and steam as well as salt and corrosive solutions at high temperatures.

Alloy 600 is a nickel-chromium-iron alloy used in applications requiring corrosion and heat resistance. This alloy has excellent mechanical properties and exhibits an ideal combination of high strength and good machinability over a wide temperature range.

Monel 400 is resistant to a variety of corrosive conditions. For example, acidic applications involving hydrofluoric acid, brine, sulfuric acid and bases. Alloy 400 can only be hardened by cold work. Monel 400 is used in many industries for its excellent corrosion resistance, especially marine and chemical processing.

Inconel 625 round bar has the best acid and alkali corrosion resistance. Inconel 625 Hex Bar has the best corrosion resistance to sulfuric and phosphoric acid. Inconel 625 threaded bar can be annealed in the temperature range between -320¡ãF and 842¡ãF.

Alloy 625 (UNS N06625) can be used in round bar, flat bar, extruded section, tube, tube, plate, sheet, strip, plate, hexagon, forging, extruded section and wire. View stock listings, sheet stock listings or contact sales for more availability.

This alloy is widely used in chemical and food processing, power generation, furnace components and many other market segments.