The exhibition of Zhengzhou Huitong pipe fittings 316 elbows

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

Alloy 926 is a super austenitic molybdenum stainless steel with excellent resistance to a variety of highly corrosive environments. The combination of molybdenum and nitrogen in its composition resists pitting and crevice corrosion, while copper improves sulfuric acid resistance, and nitrogen improves yield and tensile strength.

It is rolled into strip steel after process treatment. Generally, the strip steel is unpacked, flattened, crimped, and welded to form a round tube, then the round tube is rolled into a square tube and then cut to the required length. Usually 50 pieces per pack.
Square pipes are divided into seamless and welded seams. Seamless square pipes are formed by extruding seamless round pipes.

309 stainless steel is a type of austenitic stainless steel that is often used in high-temperature applications due to its excellent heat resistance. SA240 309 plate contains a high percentage of chromium and nickel, which gives it good corrosion resistance, as well as a high degree of strength and durability. SS 309 Strip (UNS S30900) is an austenitic stainless steel developed for use in high temperature corrosion resistance applications. The SA240 309 plate resists oxidation up to 1900°F (1038°C) under non-cyclic conditions. Frequent thermal cycling reduces oxidation resistance to approximately 1850°F (1010°C).

The addition of molybdenum and chromium to its alloys ensures better mechanical properties and a certain degree of corrosion resistance. ASTM A182 F22 Class 3 flanges have good atmospheric corrosion resistance and some resistance to scaling when they are exposed to high temperatures. The addition of molybdenum to alloys is generally associated with high stiffness and hardness. Therefore, when included in the chemical composition of Astm A182 F22 Class 1 WNRF Flanges, its toughness gives the alloy an advantage over conventional carbon steel grades.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

304/304L stainless steel sheet is often used in cold forming operations during the application process. Its cold forming performance is an important technical indicator to measure whether the forming is smooth and the yield rate. The influencing factors of cold forming of 304 stainless steel are more complicated. As far as its metallographic factors are concerned, it is mainly the composition of the steel, that is, the ratio of chromium equivalent to nickel equivalent, and the elongation of conventional tensile properties is an important characterization index. In order to obtain good cold forming properties, the ratio of chromium equivalent to nickel equivalent in the steel needs to be controlled within an appropriate range.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.25

The SS 904L coil is used in heat exchangers and in high temperature applications because of their high melting range of 1300 to 1390 degrees Celsius.

We are experts in all kinds of stainless steel fasteners, all kinds of bolts and nuts, if you are looking for stainless steel bolts or screws or just stainless steel washers, you are in the right place. We manufacture various types of hex bolts and socket head cap screws which are ideal stainless steel bolts for motorcycles.

904L is having very good resistance ability against reducing acids and the addition of copper is giving it general corrosion resistance to various concentrations of the sulphuric acid.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

316L is very similar to 316 in almost every way.?

Additionally, the higher content of chromium used to alloy the stainless steel 304 seamless pipes are what provides resistance against oxidizing solutions up to a temperature of about 176¡ãF such as nitric acid, up to 55% weight.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

304 stainless steel is a category of stainless steel manufactured according to the specifications of the American ASTM.These 304L Stainless Steel Pipes and Tubes, also identified as UNS 30403, can be welded at a thickness greater than 304 or heated without the need for corresponding solution heat treatment for appreciable amounts of time above 500 ° C.

ASTM A182 SS 321 Threaded Flanges
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

The ASTM A453 Grade 660 Grade D specification provides the yield strength, ie. 95 ksi 655 MPa] respectively for high temperature service, for bolted components such as studs, screws, nuts, hex bolts and various other fasteners for pressure vessel and valve flanges. ASTM A453 Grade 660 Grade D bolts are iron-based superalloy bolts made from an iron-nickel-chromium alloy with the addition of molybdenum and titanium. A453 660 Grade D Bolts maintain good strength and oxidation resistance at temperatures up to 1300oF.

The UNS S31254 Pipe Flange is made under different production types such as the forged, screwed, threaded and plate flanges. There are also different functional types such as slip on flanges, lap joint flanges, orifice flanges, welded neck flanges and blind flanges.

Stainless steel is an alloy of iron that is resistant to rusting and corrosion. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen
Completely and infinitely recyclable, stainless steel is the ¡°green material¡± par excellence. In fact, within the construction sector, its actual recovery rate is close to 100%.
Stainless steel is also environmentally neutral and inert, and its longevity ensures it meets the needs of sustainable construction. Furthermore, it does not leach compounds that could modify its composition when in contact with elements like water.
Stainless steel must contain at least 10.5 percent chromium. Depending on the grade, it may contain much higher chromium levels, and additional alloying ingredients like molybdenum, nickel, titanium, aluminum, copper, nitrogen, phosphorous or selenium.
In addition to these environmental benefits, stainless steel is also aesthetically appealing, extremely hygienic, easy to maintain, highly durable and offers a wide variety of aspects. As a result, stainless steel can be found in many everyday objects. It also plays a prominent role in an array of industries, including energy, transportation, building, research, medicine, food and logistics.

The alloys used to make these 304 stainless steel socket weld fittings are the most adaptable and widely used. UNS S30400 Short Radius Elbows can be used for high temperatures up to 889 degrees Celsius.

ASTM A403 WP316 is the standard molybdenum-bearing grade, second in importance to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than Grade 304, particularly higher resistance to pitting and crevice corrosion in chloride environments.

The combination of nickel and chromium in Incoloy 925 Ring Joint Type Flanges renders protection in both oxidizing and reducing atmospheres. High speed operations in Incoloy 925 Spacer Flanges such as grinding, milling or turning, are usually performed using water ¨C based coolants.

We are manufacturing Stainless steel 304/ 304L forged fittings in both socket weld and threaded form and Stainless steel 304/ 304L pipe bends in both standard and non standard sizes, with bending radius of 1D to 10D. We offer ex-stock delivery of various standard size and type Stainless steel 304/ 304L pipe fittings, Stainless steel 304/ 304L flanges and Stainless steel 304/ 304L pipe bends.

The alloying element that makes steel ¡®stainless¡¯ is chromium; however it is the addition of nickel that enables stainless steel to become such a versatile alloy.

Stainless steel 347 hex head bolts easily lose their shell electrons, resulting in a free-flowing cloud of electrons in their otherwise solid arrangement. Meanwhile, 347 stainless steel fasteners are used in corrosive environments where temperatures may cycle in excess of 800o F (425o C). Refinery applications are common. Other uses for 347 stainless steel are thermal sensors and thermocouples.

Stainless steel 317L flanges are a method of connecting pipes, valves, pumps and other equipment to form a piping system. It also facilitates cleaning, inspection or modification.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Grade 316 pipe bend is relatively easy to machine, although more difficult than carbon steel. More power is required to machine grade 316. Cutting speed should be lower, the feed higher, tooling and equipment heavier.

SS 321 Blind Flange
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

Class 150 ANSI SS 904L Flanges
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

We supply and sell 304/316L Sanitary Stainless Steel Pipe Fitting Reducing Tee with reasonable price and reliable quality to create a sincere enterprise. Now, we are trying to enter new markets where we do not have a presence and developing the markets we have the already penetrated. In line with the principle of customer first, we constantly pursue perfection, improve the technical content and quality of products, and constantly improve ourselves while meeting customers.

310S and 310H based on the carbon content, are used in high temperature service with high corrosion prone environments because of the high temperature tolerance and high oxidation corrosion resistance.