A182 F316L special flange the best fit for your application

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

Stainless 316 grades cost more due to their better corrosion resistance. This higher grade alloy is especially recommended for applications where the alloy is exposed to chlorinated solutions and chlorides, including seawater.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.69

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

AISI 904L washers are thin flat ring-type assemblies that are bolted between a bolt and a nut to evenly distribute the load on threaded fasteners. Stainless steel 904L washer has excellent resistance to general corrosion, pitting and crevice corrosion in chemicals containing chlorides and sulfuric, phosphoric and nitric acids. SS 904L washer also contains niobium for stabilization against sensitization and resulting intergranular corrosion, a transformation that is not complete until temperatures drop to 90 degrees Fahrenheit.

ASTM a403 wp304 pipe bend is done to under control conditions to avoid carburization, decarburization and scaling surface. Heat treatment methods are stress relieving, hardening and annealing which strength the ductility and corrosion resistance properties.

ASME SA 182 AS Forged Pipe Flanges are forged from a single piece of raw material for good strength. Some applications need to end pipes instead of connecting more pipes. A182 Alloy Steel Blind Flanges are used for permanent or temporary closure of pipelines. Flanges can be welded or bolted.

As a highly economical stainless steel featuring high corrosion resistance, Incoloy 926 (N08926) is highly resistant to pitting and crevice corrosion in halide media and sulfur-containing hydrogen environments.

904L stainless steel combines molybdenum and copper with iron for tremendously increased resistance to reducing acids like sulphuric acid. It stands up extremely well to chlorides in the environment for low pitting and crevice corrosion, as well as stress corrosion cracking.

The low carbon content of 304/304L stainless steel limits the formation of harmful carbides such that this grade is safe for most operations in welded structures, and the service temperature is limited to 800¡ãF. Both hardness and tensile strength can be increased by cold work, which can lead to slight magnetism.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End
Size OD: 1/2″ ~ 48″
Thickness: SCH5~SCHXXS
Length :As per your requirement.
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.40

Because stainless steel 304 pipe is an alloy with a minimum of 18% to a maximum of 20% chromium, the metal forms a self-healing, passivating oxide layer on the surface of the pipe.

La aleacion es un derivado del acero inoxidable 316 y es una parte integral de las aplicaciones relacionadas con la estructura. Especificaciones como ASTM A312 cubren tuberias de acero inoxidable 316ti de aleacion austenitica de construccion soldada y sin soldadura.

El tubo SMO 254 esta altamente aleado y tiene una resistencia a la corrosion comparable a los aceros austeniticos de alto rendimiento. La tuberia sin costura SMO 254 no se corroe, oxida ni se moja como el acero normal.

Seamless piping is required for many high-pressure, high-temperature applications in the oil & gas, power generation and pharmaceutical industries. Welded piping (which is generally cheaper to produce and is more widely available) is specified across all industries as long as the temperature, pressure and other service variables do not exceed parameters noted in the applicable standard.

One tension test shall be made for each heat of ASTM A182 F51 flanges. One set of three Charpy V-notch tests shall be performed for each heat of products.

253 MA achieves its heat resistance properties through tightly controlled microalloy additions. Cerium combines with silicon to provide excellent oxidation resistance at temperatures up to 2000¡ãF (1093¡ãC). The combination of nitrogen, carbon and cerium provides twice the creep rupture strength of 310 and 309 stainless steels at 1600¡ãF (871¡ãC). Its 0.2% offset yield strength is characteristic within a typical range of hardness Rockwell B is Rb 90 and 0.2% offset yield strength is 45000 to 69000 psi, its 2″ elongation is 42% to 70%, ultimate Tensile strength is 90,000 to 114,000 psi.

Stainless Steel 304 Socketweld Flanges
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

304/304L stainless steel has good cold and hot working properties, and can use a variety of cold and hot working processes to produce metallurgical products such as forgings, bars, wires, plates, strips and wires. The hot working temperature range is 900-1180 ¡æ. Cold working is relatively easy and not particularly difficult, because these two steels are easy to cold harden, and when the cold deformation is too large, intermediate annealing is required to facilitate further processing.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.22

Alloy 347 stainless steel plate cannot be hardened by heat treatment, only by cold working.

We manufacture Stainless steel 304/ 304L pipe fittings for end-users such as marine engineering, chemical processing, hydro-carbon processing, heat exchangers, valves and pumps. and ship worldwide.

Coiled tubing makes long length tube installations possible without the need for joining fittings. This reduces installation time and costs as well as eliminates potential leak points. We stock both seamless and welded tube coils to meet the needs of petrochemical, compressed natural gas (CNG), geothermal, and flow measurement applications. Coiled tubing can be provided in long mill lengths that stretch over a mile, or in custom cut-to-length sections as short as fifty feet.

AL-6XN alloy has a long history in food, beverage, dairy, personal and home care, and biotech and pharmaceutical applications.

SS 310 is the austenitic SS material. It is designed for the use at the elevated temperature and corrosion-resistant purposes. It under the mildly cyclic condition is resisting oxidation to 1100 deg C.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

While both 304 and 316 stainless steels are strong, the addition of molybdenum to 316 gives it a slight advantage over 304 in strength. With 316 stainless steel, you can expect better resistance to chloride corrosion and pitting than 304 stainless steel, as well as higher strength at elevated temperatures.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.60

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

304 stainless steel does have one weakness: it is susceptible to corrosion from chloride solutions, or from saline environments like the coast. Chloride ions can create localized areas of corrosion, called ¡°pitting,¡± which can spread beneath protective chromium barriers to compromise internal structures. Solutions with as little as 25 ppm of sodium chloride can begin to have a corrosive effect.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Components constructed under specification ASTM A182 such as 317L Stainless Steel Flanges are intended to be used for elevated temperatures. This specification takes into account various requirements that these flanges need to conform to. Usually, similar to most ASTM specifications, the ASTM A182 have to conform to both mechanical and chemistry as well as test methods

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

stainless steel flange uses the flange as the interface between two sections of the pipe connection, rather than directly connecting the pipe. Its advantage is that compared with the straight pipe connection, the stainless steel flange is safer and more reliable, and the interface is more secure.

Stainless grade 316Ti contains a small amount of titanium. The titanium content is usually only around 0.5%. Titanium atoms stabilize the structure of 316 at temperatures in excess of 800¡ãC.

A240 Type 304 stainless steel cutting pieces. ASTM a240 (Chromium and Chromium Nickel Stainless Steel Sheet, Sheet and Strip for Pressure Vessels and General Applications. A240 304 Stainless Steel is a common material in Stainless Steel with a density of 7.93g/cm3, also known as 18/8 Stainless Steel Industrial Made of steel, it is widely used in industry, furniture decoration industry and food and medical industry.