N08367 Stainless Steel Alloy Plate Flange Steel AL6XN Pipe Flanges

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

Round bars are long cylindrical metal raw materials that are used in different industries. 254 SMO round bar is an austenitic stainless steel. These bars have good nickel, chromium and molybdenum chemistries. This makes these bars resistant to oxidation and all forms of corrosion.

Inconel Square Pipes is similar to other stainless steel but with a titanium addition of at least five times the carbon content. This addition in Inconel Rectangular Pipes reduces or prevents carbide precipitation during welding and in the 800 Degree C 1500 Degree F service conditions.

Incoloy 925 flange also contains additional levels of titanium and aluminum compared to 825.

Stainless Steel 304 Buttweld Fittings are made up of a basic austenitic stainless steel material that has 18% chromium and 8% nickel in its composition.

The low carbon content of stainless steel 304 hex bolts minimizes chromium carbide precipitation from welding and its susceptibility to intergranular corrosion. SS 304 Nuts and Bolts are available with up to 515MPa minimum tensile strength and 40% elongation with a maximum hardness of 201HB. Steel bolts are high strength steel alloys and are the strongest commercial quality bolts. High mechanical properties come from the chemical composition of carbon, manganese, silicon, phosphorus, sulfur, chromium, nickel and nitrogen.

The high mechanical strength of Stainless Steel 304 Welded Pipes is an aftereffect of the duplex microstructure and the alloying with nitrogen. Stainless Steel 304 Seamless Pipes are shaped from a roughly 50/50 combination of austenitic and ferritic stages and are at times alluded to as austenitic-ferritic stainless steels.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

We stock an extensive inventory of high-quality standard and special grade of seamless stainless steel tube and welded stainless steel tubing.

It is also a cost-effective alternative to less expensive alloys, such as Type 316, that do not have the strength or corrosion resistance required to minimize life cycle costs in certain applications.

Incoloy 925 flange provides good resistance to chloride ion stress-corrosion cracking.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

Stainless steel is an iron alloy that contains a minimum of 10.5% chromium. Alloying elements such as nickel, molybdenum, titanium, carbon, nitrogen, and copper can boost the strength, formability, and other properties of stainless steel. Different alloys offer different levels of corrosion resistance.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

Stainless steel types 304 or 304L are also known as 18/8 stainless steels because their chemical composition includes approximately 18% chromium and 8% nickel by weight. They are widely used in the food and beverage processing industry because of their ease of forming and welding and their strong corrosion resistance. Types 304 and 304L have very similar chemical and mechanical properties. The only difference between them is the carbon content; 304 stainless steel has a maximum carbon content range of 0.08%, while 304L has a maximum carbon content range of 0.03%.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The 316 stainless steel pipe bends can undergo processes, like cold forming and welding, where the austenitic crystal structure is transformed into ferromagnetic martensite. 316L steel is more susceptible to gaining some degree of magnetism.

254SMO es compatible con aceros inoxidables austeniticos comunes. El 316L o 317L de uso frecuente falla debido a picaduras, corrosion en grietas o agrietamiento por corrosion bajo tension de cloruro. En la nueva estructura, se ha encontrado que 254SMO en muchos casos es una alternativa tecnicamente adecuada y de menor costo a las aleaciones a base de niquel y titanio.

However, it should be limited to 927 degrees Celsius and should not go below that. The ideal temperature for hot working stainless steel floor flanges is between 1149¡ãC – 1260¡ãC. For optimum corrosion resistance, stainless steel blind flanges require post-work annealing. These Astm A182 F316 blind flanges are also available in different pressure classes. Werkstoff No 1.4301 lap flanges are used in the chemical, energy, power, medical and petroleum industries.

ANSI B16.5 304 316 317 Stainless Steel Forged Weld Neck Flange
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

Stainless steel, thanks to its passive chromium oxide coating, does not react with other substances. Thanks to this, it can be freely used in contact with food. Strict HACCP standards require the use of stainless steel in contact with food. All because steel is non-toxic and easy to keep clean. Stainless steel elements can be cleaned with most common detergents and we do not have to worry that the steel surfaces will lose their properties or change their appearance.

660 Studs, non-magnetic in the annealed condition, but may become slightly magnetic by welding. Although it has the same high strength and corrosion resistance as other steels, ASTM A453 Gr. 660 Hex Head Bolts produce stronger welds due to their low carbon content. ASTM A453 Grade 660 Studs are suitable for temperature applications. This grade of fasteners is divided into A, B, C, D grades. Materials are carbon, manganese, phosphorus, sulfur, silicon, nickel, chromium, molybdenum, titanium, aluminum, vanadium, boron. ASTM A453 Grade 660 Bolts derive their strength and corrosion resistance from a combination of materials.

316 Stainless Steel’s resistance to corrosion and contamination, low maintenance, and a familiar luster make stainless steel an ideal material for many applications that require the strength and corrosion resistance of steel. In addition, stainless steel can be rolled into sheet, plate, bar, wire and tube. These can be used in cookware, tableware, surgical instruments, major appliances, vehicles, construction materials in large buildings, industrial equipment (eg, paper mills, chemical plants, water treatment), and storage tanks and tankers for chemicals and food.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.49

304,304l steels are easy to form, weld and manufacture, and their rust resistance includes acids commonly found in food, so they have been widely used in the food and beverage processing industry.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.23

ASTM A276 310 Round Bars can clearly say that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery. Widely used in automotive, textile, manufacturing, construction, cement, shipbuilding, paper and pulp, defense, heavy earthmoving equipment or aerospace.

These stainless steel pipe fittings have excellent corrosion resistance and dimensional accuracy along with close tolerances. Our range of pipe fittings include butt weld pipe fitting & instrumentation and ferrule fitting are offered in different sizes, we also provide customization as per the requirements of clients.

SUS316L pipe has excellent forming and welding characteristics. It is easily braked or rolled into various parts for use in industry, construction and transportation.

normalized basis
Normalizing removes impurities from steel and increases its strength and hardness. This is achieved by changing the size of the grains to make them more uniform throughout the steel sheet. The steel is first heated to a specific temperature and then cooled by air.

AL-6XN is a low carbon, nitrogen containing super austenitic stainless steel. The alloy is designed to be a seawater resistant material and has been found to resist a wide range of corrosive environments. Due to the alloy’s corrosion resistance and high strength, AL-6XN is a better choice than traditional duplex stainless alloys and more cost-effective nickel-based alloys.

316L is very similar to 316 in almost every way.?

Stainless Steel 304 Flanges are components that are used to connect pipes together. They differ from the fittings in that all flanges have an outward projection from them that provides additional space for attachment such as welding or bolting. Roopam Steel is a manufacturer and leading supplier of these flanges.

It is ideal for food processing, chemical processing, and fluid transportation. The most common uses for stainless steel forged fittings are in food and fluid processing, as well as chemical applications. Stainless Steel 304 is the best choice for forged fittings because of its inherent properties.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.