Super Duplex S32750 Flange UNS S32750 THREADED FLANGES

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

Super Duplex 2507 has more than twice the strength of conventional austenitic stainless steels in the annealed condition.

Type: Seamless, Welded

WT: SCH5-SCH80S

It is a super duplex alloy, so heat resistance is also what Super Duplex 2507 rods are capable of. River or sea water often contains highly corrosive chemicals containing sulfur or chloride ions, and materials such as the 2507 Super Duplex Round Bar can withstand these chemicals.

The ASTM A790 Duplex 2205 Pipe produced under this specification are intended to be used for those applications where corrosion resistance is a primary concern.

UNS S32750 Bolts are used for the assembly of two unthreaded components, with the assistance of a nut. UNS S32750 Bolts are known to have superior properties such as high tensile and yield strength.

It is a tee fitting with two outlets at a 90¡ã junction to the main line.

ASTM A240 Type 2507 Duplex Sheet is an alloy used in applications with high strength and corrosion resistance. The composition of the duplex 2507 sheet is approximately 25% chromium, 7% nickel and 4% molybdenum. This composition makes it resistant to crevice corrosion and chloride pitting.

HT PIPE is the government certified and doing business in steel industry for long years and are manufacturing S32750 Duplex buttweld fittings at affordable rates.

Alloy 2205 duplex stainless steel plate has better pitting and crevice corrosion resistance than 316L or 317L austenitic stainless steel in almost all corrosive media.

From corrosion resistance to strength, businesses around the world appreciate these properties of 2507 Super Duplex Seamless. Due to the dual microstructure phase, the weldability of this alloy is classified as good, which is why a relatively robust and durable super duplex welded pipe can be achieved.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.41

Also known as standard duplex stainless steel, these 2205 duplex bolts are one of the most widely used stainless steel grades.

Alloy 2205 duplex stainless steel sheet is particularly suitable for applications covering the -50¡ãF/+600¡ãF temperature range.

For 2500# in sizes from NPS 1/2 to NPS 12 ASTM A182 UNS S32750 Flanges, with requirements in both metric and U.S. A182 S32750 Flat Flanges for companies involved in Equipment Manufacturing, Oil Refineries, Mining, Chemical manufacturing and Industrial Construction.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The strength, factorially speaking of an ASTM A790 UNS S31803 Seamless Pipe, is two times higher than that of either of the two stainless steel classes. And the toughness and ductility of the Sa 790 UNS S32205 Welded Pipe are better in comparison to ferritic steels.

These grades of super duplex stainless steel fasteners are used when applications require excellent corrosion resistance and strength. Composed of nitrogen, molybdenum and chromium, they have excellent resistance to crevice corrosion and chloride pitting.

2205 has excellent corrosion properties, and it is well-suited to environments containing chlorides and hydrogen sulphide, for use in oil and gas extraction from sour wells, in refineries and in process solutions contaminated with chlorides.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

In the annealed condition, S31803 contains approximately 40-50% ferrite. S31803 is often referred to as the workhorse grade and is the most widely used grade in duplex stainless steel pipes. The use of S31803 stainless steel pipe should be limited to temperatures below 600¡ãF.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.64

“Duplex” describes a family of stainless steels that are neither fully austenitic (like 304 stainless steel) nor pure ferritic (like 430 stainless steel). The structure of the S31803 duplex stainless steel consists of a pool of austenite surrounded by a continuous ferrite phase.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.63

With an increased chromium content compared with F51 it offers improved pitting corrosion resistance.

Combining many of the beneficial properties of ferritic and austenitic steels, 2205 is the most widely used duplex grade. Its high chromium and molybdenum conutenut gives stainless steel excellenut corrosion resistance.

La tuberia ERW se usa en aplicaciones que requieren una soldadura extensa para la instalacion. Los usos de la tuberia duplex ASTM A790 UNS S32205 no se limitan a aplicaciones industriales, tambien se pueden ver en aplicaciones domesticas de bajo costo.

Duplex 2205 alloy is composed of high chromium and low or moderate nickel conutenut.

Duplex stainless steel, famous for its excellent combination of good mechanical properties and high corrosion resistance, is widely used in the industrial fields, such as the production of seawater heat exchangers and the chemical containers for use in the high-concentration chloride environments.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The combination of high strength, corrosion resistance and moderate weldability has many benefits but also bring disadvantages and limitations. High strength is a disadvantage when forming and machining. The higher strength also means that the metal is less ductile than austenitic grades. This means that these steels are not good when the goods being produce require any degree of complex forming. It is also worth bering in mind that evemn if the item can be formed in duplex steel greater forces are required. The metallurgy of duplex stainless steels is much more complex than for austenitic or ferritic steels whith the result that they are more complex and therefore expensive to produce. Howver the lower quantity of nickel in them as compared to austenitic grades does help to keep the cost down and reduce price volatility.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex 2205 is a nitrogen-enhanced duplex stainless steel designed to solve common corrosion problems encountered with 300 series stainless steels. “Duplex” describes a family of stainless steels that are neither fully austenitic (such as 304 stainless steel) nor purely ferritic (such as 430 stainless steel).
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.65

The 2205 was developed to provide excellent machinability. Control of composition and inclusion type improves chip formation and reduces tool wear, resulting in higher machining efficiency and lower tool costs.

Alloy 2205 duplex stainless steel is an alloy developed from the initial Super Duplex Stainless Steel. It is supplied in the solution annealed condition.

2205 fasteners are widely used in applications requiring good corrosion resistance and strength. Has excellent corrosion resistance; much higher than other grades. It eliminates localized corrosion types such as intergranular corrosion, pitting corrosion and crevice corrosion. Duplex 2205 bolts are ideal for environments containing chlorides and hydrogen sulfide for oil and gas extraction from sour wells, refineries, and chloride-contaminated process solutions.