alloy coil

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Titanium’s density is about 60% that of stainless steel and nickel alloys, this weight saving makes it a popular choice in applications where this is critical such as aerospace.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Another important feature of the N08800 Incoloy Alloy 800 Cold Rolled Plate is its excellent resistance to chlorine ion stress related corrosion cracking, to which the metal, like its other Inconel counterparts is virtually immune to.
Type Plate, Sheet,Strip Coil
Length 0~12m or as per your requirements
Width 0~2500mm or as per your requirements
Thickness 0.3~1200mm or as per your requirements

Inconel 600 is a nickel-chromium-iron alloy with excellent corrosion resistance, oxidation resistance and high strength at elevated temperatures. Due to its high nickel content, Inconel 600 is extremely resistant to chloride ion stress corrosion cracking. Age hardening is not required as Inconel 600 is hardened and strengthened by cold work only. The Inconel 600 can operate in temperatures as low as 700¡ãF (370¡ãC).
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Round bars are cold drawn and annealed, available in stock lengths or cut to size. Alloy round bars provide strength and corrosion resistance in a variety of environments and can be used in the frame, machine part manufacturing, food service and medical device industries.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Carbon steel flange is a kind of rim formed at the end of the pipe when it is fixed on the pipe. It is used to seal the ends of pipes, valves or other connections. It has high tensile strength and is available with convex surfaces and supports for easy installation. It is an iron-carbon alloy containing up to 2.1 wt.% carbon. Carbon steel does not have minimum specified levels of other alloying elements, but it usually contains manganese.

UNS S32205 Duplex Steel ASME SA182 Butt Weld Flanges are suitable for seawater and power generation equipment because their smooth surfaces can withstand temperatures up to 600¡ãF, while also having excellent flow characteristics.

Hastelloy C-276 is a Ni Mo CR superalloy added with tungsten, which has excellent corrosion resistance in a wide range of harsh environments. The high content of Ni and Mo makes the Ni steel alloy particularly resistant to pitting and crevice corrosion in reducing environment, while CR transfers the performance of anti-oxidation medium.

Although molybdenum is a good element, excessive use of it may reduce the creep ductility of Gr F11 plate flanges. Graphitization and decomposition of iron carbide may occur when the temperature exceeds 500 degrees Celsius. Chromium has been added to SA A182 F11 alloy steel CL.2 forged pipe flanges to prevent creep ductility reduction and graphitization. In addition, the added chromium also provides oxidation resistance.

Duplex steel flanges are widely used in the used engineering, machinery and automotive industries. Duplex Steel S31803 Lap Flanges are ideal for applications requiring better corrosion resistance than Type 316 and good high temperature strength. We have Duplex Steel S31803 / S32205 Flanges in stock. Duplex steel flanges are commonly used in chemical, petrochemical, and power industries.

Nickel 200 is a solid solution strengthened metal. Nickel 200 Bar Stock contains 99.6% wrought nickel by weight and is considered commercially pure nickel. DIN 2.4066 Bar has good mechanical and physical properties. For example, ASTM B160 N02200 has excellent resistance to many corrosive compounds as well as corrosive environments. Meanwhile, Nickel 200 is a solid solution strengthened wrought alloy that can be designed as round bars and rods. These two components are used interchangeably and can be distinguished from certain key functions.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Flange is the parts which connects two pipe ends, flange connection is defined by the flange, gasket and bolt three are connected as a group of combined sealing structure of the detachable connection. The gasket is added between the two flanges and then fastened by bolts. Different pressure flange, thickness is different, and the bolts they use are different, when pump and valve connect with pipe, the parts of the equipment are also made of the corresponding flange shape, also known as flange connection, usually closured bolted connection parts are also known as flanges, such as the connection of ventilation pipe, this kind of parts can be called “flange type part”, but this connection is only part of a device, such as the connection between flange and water pump, it’s not inapposite to call water pump as flange type parts,but relative small valve,it can be called as flange type parts .

SA 387 Gr 22 plate has a chromium content of 2.25% and a molybdenum content of 1% and can also operate successfully at temperatures up to 600 degrees Celsius. Molybdenum and Chromium sheets and plates perform well at multiple temperatures, providing ideal output on a regular basis. The addition of molybdenum to SA 387 alloy increases the tensile strength of the sheet at higher temperatures.

SA 387 grams. 22 chlorine. 2 is also a pressure vessel grade steel that can withstand high temperatures. SA 387 Grade 22 has significant corrosion and oxidation resistance and is suitable for use in the petroleum, coal and petrochemical industries. The molybdenum content of the alloy helps to increase the strength of the alloy at suitable temperatures. While there are many types of carbon steel, sheet and plate forms have higher heat resistance.

By increasing mesh stiffness, A387 also provides high corrosion and oxidation resistance. This necessarily stops the etchant from melting the iron and provides optimum heat resistance, making it a good substitute for gaseous environments. It is very easy to solder. We sell products in different sizes, which may vary in width, height, style and length to meet the various needs and requirements of our customers.

Because of our unwavering commitment to integrity, we are sourcing premium raw materials to design and develop superior quality products known for their unrivaled quality, rugged manufacturing, precision ground surfaces, superior strength, superior corrosion resistance, smoothness surface finish and ease of installation.

Since our inception, we have been cultivating a proactive approach, keeping a close eye on challenging customer needs, and for four consecutive years, we have been successful by anticipating long-term unmet needs across different industrial sectors such as oil and gas refineries, chemicals, petrochemicals, etc. Businesses, refineries, fertilizer plants and power plants. Additionally, our level of competence in raw material testing, dimensional inspection and material traceability has earned us a reputation as a trusted distribution partner for many.

Added molybdenum for excellent temperature and corrosion resistance. The addition of molybdenum and chromium increases tensile strength and at elevated temperatures. These A387 alloy steels GR 11, GR22 and GR91 contain a number of chemistries that help them form into serviceable, harder alloys and higher heat resistant alloys.

A387 alloy steel GR 11, 22 and 91 are more responsive by adding mechanical processing and heat treatment. These grades of alloys are durable heavy duty panels for furniture that can withstand any high temperature. A 387 is extremely ductile, has formability, and they have excellent weldability and are easy to cut and bend to form superstructures.

Alloy A387 is an excellent host for hydrogen stress cracking, wet, pitting, occlusal corrosion, crevice and sulfide stress cracking. A387 Chromium Molybdenum GR 11, GR22 and GR91 Steel Plate Structural Products have undergone many tests such as pitting resistance tests, micro and macro tests, flare tests, hardness tests, etc.

We stock one of the widest ranges of chrome molybdenum steel plates in China, compliant with ASTM/ASME and EN10028-2. All are available from stock for immediate delivery or shipping to your production facility. Chromium molybdenum sheets fill an important gap between aluminium and stainless steel.

A387 steel plate is much heavier than aluminum, but its corrosion resistance is much lower than stainless steel. What makes it so popular is that chrome molybdenum steel is strong and formable. Therefore, it can be easily made into pipes and fittings and rolled into pressure vessels and boilers without the cost or cracking seen with other materials.

HT PIPE steel plate, officially known as Chrome Molybdenum, is usually sold as ASTM A387 or ASME SA387. A387 is an alloy steel plate designed for use in pressure vessels, process vessels and boilers operating at high temperatures.

All chrome molybdenum steel sheets are sedated and heat treated in accordance with ASTM A387, which also specifies minimum and maximum levels of the following elements in steel: Chemicals of Carbon, Manganese, Phosphorus, Sulfur, Silicon, Chromium, Molybdenum, Nickel, Vanadium requirements, columbium, boron, nitrogen, aluminum, titanium and zirconium. A387 boards must undergo product, chemical and tensile testing (documented in the MTC or material test certificate) – must meet specific requirements for tensile strength, yield strength and elongation.

A387 Chrome Molybdenum Steel Sheet Uses & Applications Due to the key properties of the alloy, chrome molybdenum steel sheet is popular in onshore and offshore production facilities in the oil and gas industry. It is also widely used in the energy industry as a key component in power plants. It can be found in boilers and pressure vessels, heat exchangers, flanges, fittings and valves, pipes and pipe supports.

A387 chrome molybdenum steel sheet has a much higher heat resistance than other carbon steels and is therefore useful for applications handling hot fluids or gases at high temperatures. Chromium and molybdenum are key alloying elements. They offer many of the properties of stainless steel at a lower cost. (Typically, A387 alloy steel has a chromium content of 0.5% t0 5%, while stainless steel has a chromium content of 16%).

The molybdenum component in SA387 alloy provides high resistance to oxidation and corrosion by increasing the lattice strain of the steel structure, in addition to improving tensile strength at elevated temperatures. This effectively stops the corrosive agent from dissolving the iron out of the steel structure. This makes it very effective in applications where brine is present, such as desalination plants, purification plants, offshore applications and users of large volumes of brine.

ASTM A387 Grade 5 Grade 1 Plates, Plates and Coils are generally made of Molybdenum and Chromium. These mechanisms have various mechanical and industrial applications. ASTM A387 Alloy Steel Gr. 5 sheets and ASTM A387 Alloy Steel Gr. 5 Sheets are known for their excellent performance.

Like 16Mo3, molybdenum increases heat resistance and reduces the effects of creep in the metal. Both chromium and molybdenum increase the hardenability of low alloy steel sheets. When both chromium and molybdenum are used in steel, the result is greater than the sum of the alloys, for reasons that are not fully understood. We only offer premium A387.

HT PIPE is a distinguished manufacturer and supplier of ASTM A387 Class 5 Class 1 Sheet, Sheet and Coil. We design ASTM A387 Alloy Steel Gr. 5 Coils of various sizes and shapes. We offer quality products at affordable prices.

SA 387 grade alloy steel plate Mainly used for welded pressure vessels where improved toughness is required. It is a low alloy pressure vessel high quality steel for high temperature. We offer a wide range of sheet sizes and can process thicknesses ranging from 6 to 10 mm.

We maintain friendly relations with all customers who are very satisfied with our alloy steel Gr. 5 spacers. In addition, our alloy steel Gr. Class 5 1 perforated plate and alloy steel Gr. Class 5 1 hot rolled sheet is finely machined to ensure flawless finish.

ASTM A387 steel plates are typically used in the temperature range of 316 to 593. The high temperature properties of these alloyed steel plates are still of special use, and today, ASTM A387 steel plates are manufactured as fine grained, low silicon, low sulfur, calcium treated and occasionally Q&T to provide the highest level of toughness.

Grade 91 alloy steel plates shall be normalized and tempered heat treated or cooled by accelerated cooling by air blasting or liquid quenching, and then tempered. Grade 91 steel requires austenitizing at 1900 to 1975¡ãF [1040 to 1080¡ãC] and should be tempered at 1350 to 1470¡ãF [730 to 800¡ãC].

ASTM A387 has some excellent properties such as flexibility, durability, abrasion and power saving properties, rust resistance, dimensional accuracy, consistent performance, leak proof, corrosion resistance, high strength, heat resistance, chemical resistance, excellent The finish, etc. Alloy steel plates, sheets and coils are used in some typical applications such as chemical and related industries, pressurized vessels, heat exchangers, pipes and pipework.

These alloy steel A 387 are available in various forms such as billets, gaskets, flat plates, rings, checker plates, perforated plates, rolls, plain plates, etc. Alloy 387 comes in different shapes, sizes, thicknesses, volumes and shapes. These alloy steels are also suitable for chemical uses such as zirconium, titanium, aluminum, nitrogen, boron, vanadium, nickel and nitrogen.

A387 CrMo GR 11, GR22 and GR91 sheet constructions are suitable for various industries and applications such as furnace equipment, chemical processing, food processing, nuclear power plants, etc. These also include applications such as industrial boilers, heat exchangers, piping and pressure vessels. Alloy A387 is also supplied to industries such as the petroleum and petrochemical industries. ASME a 387 covers molybdenum for elevated temperature, pressure vessel services in alloy steel mills.

We are shareholders in the ASME SA 387 GRADE 9 alloy steel plate series, which has enormous tensile and yield strengths so that it can be used at higher temperatures. The chromium-molybdenum combination gives these plates corrosion resistance and enhanced tensile strength at elevated temperatures.

Alloy steel plate is better than carbon steel plate. reason? ASTM A 387 GRADE 12 alloy steel sheet is more responsive to a range of heat treatments and mechanical processes. They are composed of chromium, molybdenum, manganese, silicon, and more, making them stronger, harder, heat-resistant, and weldable.

One of the advantages of A387 alloy steel plate is that it is durable
Alloy steel sheets are durable because they are normalized and annealed to obtain a hard surface. Annealing toughens the surface by relieving internal stress, resulting in a uniform structure of ASME SA387 GRADE 22 alloy steel sheet. Therefore, these treatments provide heavy-duty boards that can withstand powerful blows.

One of the advantages of A387 alloy steel plate is its good weldability, our ASTM A 387 GRADE 91 alloy steel plate has excellent ductility, they have excellent formability and can be cut and bent into many shapes. The normalizing and tempering process gives the alloy steel sheet a strong but resilient body due to reheating and cooling. Ultimately, they achieve excellent solderability and are easy to solder to form superstructures.