ASTM A182 F304 Flange

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Titanium’s density is about 60% that of stainless steel and nickel alloys, this weight saving makes it a popular choice in applications where this is critical such as aerospace.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Another important feature of the N08800 Incoloy Alloy 800 Cold Rolled Plate is its excellent resistance to chlorine ion stress related corrosion cracking, to which the metal, like its other Inconel counterparts is virtually immune to.
Type Plate, Sheet,Strip Coil
Length 0~12m or as per your requirements
Width 0~2500mm or as per your requirements
Thickness 0.3~1200mm or as per your requirements

Inconel 600 is a nickel-chromium-iron alloy with excellent corrosion resistance, oxidation resistance and high strength at elevated temperatures. Due to its high nickel content, Inconel 600 is extremely resistant to chloride ion stress corrosion cracking. Age hardening is not required as Inconel 600 is hardened and strengthened by cold work only. The Inconel 600 can operate in temperatures as low as 700¡ãF (370¡ãC).
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Round bars are cold drawn and annealed, available in stock lengths or cut to size. Alloy round bars provide strength and corrosion resistance in a variety of environments and can be used in the frame, machine part manufacturing, food service and medical device industries.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Carbon steel flange is a kind of rim formed at the end of the pipe when it is fixed on the pipe. It is used to seal the ends of pipes, valves or other connections. It has high tensile strength and is available with convex surfaces and supports for easy installation. It is an iron-carbon alloy containing up to 2.1 wt.% carbon. Carbon steel does not have minimum specified levels of other alloying elements, but it usually contains manganese.

UNS S32205 Duplex Steel ASME SA182 Butt Weld Flanges are suitable for seawater and power generation equipment because their smooth surfaces can withstand temperatures up to 600¡ãF, while also having excellent flow characteristics.

Hastelloy C-276 is a Ni Mo CR superalloy added with tungsten, which has excellent corrosion resistance in a wide range of harsh environments. The high content of Ni and Mo makes the Ni steel alloy particularly resistant to pitting and crevice corrosion in reducing environment, while CR transfers the performance of anti-oxidation medium.

Although molybdenum is a good element, excessive use of it may reduce the creep ductility of Gr F11 plate flanges. Graphitization and decomposition of iron carbide may occur when the temperature exceeds 500 degrees Celsius. Chromium has been added to SA A182 F11 alloy steel CL.2 forged pipe flanges to prevent creep ductility reduction and graphitization. In addition, the added chromium also provides oxidation resistance.

Duplex steel flanges are widely used in the used engineering, machinery and automotive industries. Duplex Steel S31803 Lap Flanges are ideal for applications requiring better corrosion resistance than Type 316 and good high temperature strength. We have Duplex Steel S31803 / S32205 Flanges in stock. Duplex steel flanges are commonly used in chemical, petrochemical, and power industries.

Nickel 200 is a solid solution strengthened metal. Nickel 200 Bar Stock contains 99.6% wrought nickel by weight and is considered commercially pure nickel. DIN 2.4066 Bar has good mechanical and physical properties. For example, ASTM B160 N02200 has excellent resistance to many corrosive compounds as well as corrosive environments. Meanwhile, Nickel 200 is a solid solution strengthened wrought alloy that can be designed as round bars and rods. These two components are used interchangeably and can be distinguished from certain key functions.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Flange is the parts which connects two pipe ends, flange connection is defined by the flange, gasket and bolt three are connected as a group of combined sealing structure of the detachable connection. The gasket is added between the two flanges and then fastened by bolts. Different pressure flange, thickness is different, and the bolts they use are different, when pump and valve connect with pipe, the parts of the equipment are also made of the corresponding flange shape, also known as flange connection, usually closured bolted connection parts are also known as flanges, such as the connection of ventilation pipe, this kind of parts can be called “flange type part”, but this connection is only part of a device, such as the connection between flange and water pump, it’s not inapposite to call water pump as flange type parts,but relative small valve,it can be called as flange type parts .

Stainless Steel 304 Spectacle Blind Flange, also known as a SS 304 Figure-8 Blind Flange or a paddle blind, is a special type of flange used in piping systems. SS 304 Spectacle Blind Flange is primarily used for isolating sections of a pipeline or for temporary closure during maintenance or inspection activities.

The installation process for a 304 stainless steel SO flange is relatively simple. Firstly, the pipe end is prepared by cleaning it and ensuring that 1.4301 flange is free from damage and debris. Next, the S30400 flange is positioned on the pipe and aligned to ensure a smooth flow of the fluid or gas. Finally, the bolts are tightened to the manufacturer’s specifications to ensure a secure connection, taking care not to overtighten the bolts as this can cause damage to the flange or pipe.

Stainless Steel 304 Flanges are components that are used to connect pipes together. They differ from the fittings in that all flanges have an outward projection from them that provides additional space for attachment such as welding or bolting. Roopam Steel is a manufacturer and leading supplier of these flanges.

At moderate temperatures, Werkstoff No 1.4301 SS 304 Flanges can also deliver a good performance in caustic solutions, especially those solutions that are free of chlorides or fluorides.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

astm a182 f304 flanges are made of basic austenitic stainless steel. These flanges fall under the ASTM A182 specification for high temperature, high pressure applications. HT PIPE is a leading manufacturer and supplier of 304 Stainless Steel Flanges in a variety of sizes and dimensions. Flange material is 18% chromium and 8% nickel with carbon, manganese, phosphorus, silicon and sulfur.

This composition makes stainless steel 304 flanges stronger and has good overall corrosion resistance. These flanges have a minimum yield strength of 205MPa and a minimum tensile strength of 515MPa. This grade has different types of flanges. ss 304 blind flanges are used to close or end pipes.

Blind flanges can be permanently welded to the pipe or bolted for temporary closure. ss 304 flange slips are easy to install on seamless pipes. The slips on the flanges can also be adjusted for the connection position as they allow the pipe to slide over them.

Different standards and specifications, such as the uns s30400 WNRF flange, govern the size of the flange. Stainless steel flanges typically range in size from ?” to 48″. Special flanges with larger dimensions can also be produced for special purposes. The din 1.4301 flange is one of the most used flanges in the world because of its low cost and relatively high strength.

As we all know, flanges are used to connect two pipes, pumps and valves. This is corrosion resistant, so top quality materials are used to make this product. SA 182 f304 flanges, also known as stainless steel slip flanges, are available in a variety of grades, sizes and high pressures.

SS316 flanges are affordable, so the full price list is mentioned below. This is mainly used in power plants, modern construction, oil industry, oil and gas industry, fertilizers and other industries. These are packed in wooden boxes and then shipped to other countries. Stainless steel blind flanges are used to cover the ends of piping systems. Due to the high material of stainless steel, this is suitable for high temperature and high pressure applications.

Flanging is a method of connecting pipes, valves, pumps and other equipment to form a piping system. It also facilitates cleaning, inspection or modification. Flanges are usually welded or threaded.

Grade 304 is a very ductile alloy. Therefore, this material is easily formed into various products including flanges. Primarily sought after for its economic value, the use of stainless steel 304 flanges is typical in applications requiring limited corrosion resistance. The strength and resistance properties of these flanges are lower than grade 316 compared to most carbon steel grades.

Stainless steel pipe fittings are used to connect two or more lengths of pipe or to close pipe ends. Flanges are fittings attached to pipes to allow attachment of accessories and other items, prevent flow or add strength to the pipe. Complies with ASTM A304, ASME/ANSI B16.5 standards.

Stainless steel 304 flanges are austenitic stainless steel with better corrosion resistance than stainless steel 317. These stainless steel 304 threaded flanges are suitable for welding as it has a lower carbon content than the 301 to 303 series alloys to avoid carbide precipitation in welding applications.

As there are many mechanical properties of stainless steel 304 plate flanges, but some of them are discussed, such as density, melting point, tensile strength, etc.

ASTM A182 Stainless Steel 304 Flange Supplier UNS S30400 Stainless Steel Slip on Flange or Blind Flange can be well defined as a chrome-nickel austenitic alloy. Meanwhile, grade 304 is the standard stainless steel you might see in pans and cooking tools. 150# Stainless Steel ANSI SS 304 Butt Weld Flanges are specially developed for piping or welding applications.

SS 304 flange price list depends on each piece the customer wants to buy, eg ASTM A105 is between RS 180/piece to RS 350/piece, while ASTM A182 is between RS 100/piece to RS 300/piece.

Grade 304 stainless steel is the standard “18/8” stainless steel; it is the most versatile and widely used stainless steel available in a wider range of products, forms and finishes than any other. It has excellent forming and welding characteristics. The balanced austenitic structure of grade 304 enables deep drawing without intermediate annealing, which makes this grade dominant in the manufacture of drawn stainless steel components such as sinks, hollowware, and pans.

Stainless steel 304 flanges (18Cr-8Ni) can be made from forgings, castings or sheets, respectively. It includes ASTM A182 Gr. F304 Forging, ASTM A351 Gr. CF8 casting and ASTM A240 Gr. 304 board. Flange dimensions generally conform to ASME B16.5. Available in 7 levels: 150, 300, 400, 600, 900, 1500 and 2500. The working pressures at which SS 304 flanges can be used at elevated temperatures are listed in the table below (also known as “Pressure-Temperature Rating” for the material).

Our ASTM A182 F304 Stainless Steel Flanges are also known as “A2 Flanges” or commercially as “18/8 Flanges”. SS 304 blind flanges are the most commonly used flanges in the industry. Stainless steel 304 slip flange contains 18% chromium and 8% nickel. Molybdenum is added to stainless steel UNS S30400 flanges to help resist corrosion from chlorides in seawater and dilute acids.

DIN 1.4301 stainless steel pipe flanges also have excellent forming and welding properties. 304 SS forged flanges are the most versatile stainless steel flanges due to their weldability. Corrosion resistance provides the best all-around performance stainless steel at a relatively low cost.

Type 304 stainless steel lap flanges have a maximum carbon content of 0.07%, resulting in excellent low temperature performance. We are the most versatile and broadest supplier of 304 Stainless Steel Pipe Flanges. The benefits of our flanges include long life, beautiful, clean surfaces and low maintenance costs.

Our products are developed in fully equipped facilities and ensure top quality. Our SS 304 flanges are austenitic steel products containing chromium and nickel for better corrosion resistance. Properties such as weldability and ease of formability make Grade 304 widely available.

These SS 304 flanges are resistant to a wide range of atmospheric environments and aggressive media. Our 304 stainless steel lap flanges are used to connect pipes, valves, pumps and other equipment to form piping systems.

These 304 stainless steel flanges are available in a variety of domestic and industrial applications in a variety of sizes and thicknesses to meet customer specific requirements. 304 is used in applications such as machine parts, screws, automotive headers and food handling equipment.

We offer different kinds of 304 SS flanges, such as SS 304 Reducer Flange, SS 304 Slip Flange, SS 304 Nebo Flange, SS 304 Orifice Flange, Stainless Steel 304 Loose Flange, SS 304 Lap Method flange and SS 304 blind flange. Our thorough quality checks help us build efficient products that provide excellent usability in different usage environments.

HT PIPE is one of the leading Stainless Steel 304 Flanges China Manufacturer, Exporter, Supplier using Nickel to maintain austenite synthesis at low temperature. Hardened steel 304 slip flange is an austenitic treated steel that provides better corrosion resistance than tempered steel 317.

These threaded flanges are suitable for welding as they have a carbon content lower than the 301 to 303 permutation, which avoids carbide precipitation in welding applications. Stainless steel butt weld flanges are often used for gears in composite, nutritional, paper, mining, pharmaceutical and petroleum companies. The expansion of molybdenum and the slightly higher nickel content make stainless steel 304 blind flanges suitable for structural applications in harsh environments, from dirty marine environments to sub-zero temperatures.