Duplex 2205 pipe fittings

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Titanium’s density is about 60% that of stainless steel and nickel alloys, this weight saving makes it a popular choice in applications where this is critical such as aerospace.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Another important feature of the N08800 Incoloy Alloy 800 Cold Rolled Plate is its excellent resistance to chlorine ion stress related corrosion cracking, to which the metal, like its other Inconel counterparts is virtually immune to.
Type Plate, Sheet,Strip Coil
Length 0~12m or as per your requirements
Width 0~2500mm or as per your requirements
Thickness 0.3~1200mm or as per your requirements

Inconel 600 is a nickel-chromium-iron alloy with excellent corrosion resistance, oxidation resistance and high strength at elevated temperatures. Due to its high nickel content, Inconel 600 is extremely resistant to chloride ion stress corrosion cracking. Age hardening is not required as Inconel 600 is hardened and strengthened by cold work only. The Inconel 600 can operate in temperatures as low as 700¡ãF (370¡ãC).
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Round bars are cold drawn and annealed, available in stock lengths or cut to size. Alloy round bars provide strength and corrosion resistance in a variety of environments and can be used in the frame, machine part manufacturing, food service and medical device industries.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Carbon steel flange is a kind of rim formed at the end of the pipe when it is fixed on the pipe. It is used to seal the ends of pipes, valves or other connections. It has high tensile strength and is available with convex surfaces and supports for easy installation. It is an iron-carbon alloy containing up to 2.1 wt.% carbon. Carbon steel does not have minimum specified levels of other alloying elements, but it usually contains manganese.

UNS S32205 Duplex Steel ASME SA182 Butt Weld Flanges are suitable for seawater and power generation equipment because their smooth surfaces can withstand temperatures up to 600¡ãF, while also having excellent flow characteristics.

Hastelloy C-276 is a Ni Mo CR superalloy added with tungsten, which has excellent corrosion resistance in a wide range of harsh environments. The high content of Ni and Mo makes the Ni steel alloy particularly resistant to pitting and crevice corrosion in reducing environment, while CR transfers the performance of anti-oxidation medium.

Although molybdenum is a good element, excessive use of it may reduce the creep ductility of Gr F11 plate flanges. Graphitization and decomposition of iron carbide may occur when the temperature exceeds 500 degrees Celsius. Chromium has been added to SA A182 F11 alloy steel CL.2 forged pipe flanges to prevent creep ductility reduction and graphitization. In addition, the added chromium also provides oxidation resistance.

Duplex steel flanges are widely used in the used engineering, machinery and automotive industries. Duplex Steel S31803 Lap Flanges are ideal for applications requiring better corrosion resistance than Type 316 and good high temperature strength. We have Duplex Steel S31803 / S32205 Flanges in stock. Duplex steel flanges are commonly used in chemical, petrochemical, and power industries.

Nickel 200 is a solid solution strengthened metal. Nickel 200 Bar Stock contains 99.6% wrought nickel by weight and is considered commercially pure nickel. DIN 2.4066 Bar has good mechanical and physical properties. For example, ASTM B160 N02200 has excellent resistance to many corrosive compounds as well as corrosive environments. Meanwhile, Nickel 200 is a solid solution strengthened wrought alloy that can be designed as round bars and rods. These two components are used interchangeably and can be distinguished from certain key functions.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Flange is the parts which connects two pipe ends, flange connection is defined by the flange, gasket and bolt three are connected as a group of combined sealing structure of the detachable connection. The gasket is added between the two flanges and then fastened by bolts. Different pressure flange, thickness is different, and the bolts they use are different, when pump and valve connect with pipe, the parts of the equipment are also made of the corresponding flange shape, also known as flange connection, usually closured bolted connection parts are also known as flanges, such as the connection of ventilation pipe, this kind of parts can be called “flange type part”, but this connection is only part of a device, such as the connection between flange and water pump, it’s not inapposite to call water pump as flange type parts,but relative small valve,it can be called as flange type parts .

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

Some of the typical applications of duplex steel grade 2205 are oil and gas exploration, processing equipment, transport, storage and chemical process, high chloride and marine environments, paper machines, liquor tanks, pulp, and paper digesters.

Duplex UNS S31803 butt welded pipe fittings are duplex ferritic austenitic 22% chromium, 3% molybdenum, 5% to 6% nickel alloy stainless steel. Duplex UNS S31803 butt welded pipe fittings are formed according to the crystal structure of stainless steel.

Duplex derives a mixed microstructure containing equal amounts of austenite and ferrite. Ferritic alloys provide resistance to stress corrosion cracking, while austenitic alloys provide ease of manufacture and corrosion resistance.

We manufacture premium duplex 31803/32205 fittings with many key properties such as high resistance to corrosion fatigue, stress corrosion cracking, especially chloride stress corrosion cracking, erosion, excellent workability and weldability.

A reputed distributor and supplier of Duplex S31803 Fittings, the most widely used duplex (ferritic/austenitic) stainless steel grade. We recognize the importance of supplying raw and pre-machined duplex UNS S31803 welded butt welded pipe fittings that are trusted for quality, mill source traceability, supply accuracy and fast delivery. Duplex UNS S31803 Elbow Fittings are extremely corrosion resistant and work hardenable alloys.

Duplex UNS S32205 Butt Weld Heads feature a butt weld for maximum grip during welding and provide great strength to the connection. Therefore, ASME SA182M Duplex Steel S32205 Butt Welded Pipe Fittings can be used for high pressure and high temperature applications. Power plants, desalination plants, chemical plants, food processing plants, and the aerospace industry use dual-phase materials because of their high yield strength and good corrosion resistance.

Duplex steel UNS S32205 butt welded pipe fittings are available in a variety of styles such as elbows, elbows, equal and unequal (reducing) tees, equal and reducing (reducing) crosses, concentric and eccentric Reducers, end caps, long and short pipes, seamless butt welded pipe fittings, welded butt welded pipe fittings, etc. Also known as WNR 1.4462 pipe fittings, our duplex steels can be further customized in thickness, size and specification according to the precise requirements of our valuable customers.

Duplex steel S31803 / S32205 butt welded pipe fittings, manufactured to international quality standards, using high-grade steel. Duplex Steel S31803 Elbow Butt Weld Fittings are stainless steel, a type of stainless steel designed to improve resistance to pitting, high strength, stress corrosion, crevice corrosion and cracking. Duplex steel S32205 tee butt welded pipe fittings are often used in chemical process industries: such as sulfuric acid production, nitric acid process, phosphoric acid process, ethylene oxide, polypropylene production, PVC, equipment for handling organic and fatty acids, chemical storage and tankers, thermal Duplex steel S31803 reducer fittings such as exchangers are resistant to chloride environments and sulfide stress corrosion.

Duplex 2205 fittings have higher yield strength and good mechanical properties. These fittings are highly resistant to corrosion and stress. The presence of ferritic alloys gives them strength to prevent cracking in sulfide and chloride environments.

We have been a leading manufacturer and supplier of Duplex 2205 Fittings for the past ten years. Our goal is to produce the best product for everyone at the most reasonable price.

ASME SA 240 UNS S32205 elbows are standard elbows that can be connected to almost any size elbow. These elbows are available in NPS ? to NPS 48 and can change the direction of flow in the pipe. UNS S32205 elbows are stronger than austenitic stainless steels.

Duplex stainless steel 2205 tee consists of branch pipe diameters, which are also tee pipes. These tees have 3 internal holes and can connect pipes of different diameters. Duplex Ss 2205 Reducers are used to accommodate pipes of different sizes in piping systems. These reducers can be concentric or eccentric.

Duplex fittings are used in different types of piping applications. 2205 is a standard duplex steel with 21% chromium. The material is strong, twice as strong as austenitic steel types. Different standards such as ASME B16.9, B16.28 and B16.25 govern the dimensions. Depending on the type of fitting, the nominal bore diameter of the fitting can also vary.

2205 fittings are highly demanded for the unique characteristics and performance they exhibit in their application. These products are manufactured and delivered in various shapes and sizes according to customer requirements. These pipes are transported to various industries including storage tanks, boiler production and desalination plants. The percentage of alloying elements used in the manufacture of fittings and duplex stainless steel pipes is lower at lower cost.

These fittings are produced from the highest quality raw materials and are well tested and inspected according to national and international standards. Manufacturers offer a full range of pipes and fittings such as UNS S32205 45 degrees. Elbow, Duplex UNS S31803 Reducer, Duplex S31803 Cap, Duplex S31803 Butt Weld Fitting, 2205 Duplex 90 Degree Elbow, Duplex S32205 Butt Weld Fitting, Duplex S32205 Fitting.

Duplex 2205 fittings must be cooled to room temperature as soon as possible after being processed by thermoforming. This is what has to be done in order to avoid precipitation of intermetallic or especially so-called sigma phases. The presence of this sigma phase in UNS S31803 dual-phase steel elbows is detrimental to the alloy because, in addition to the corrosion resistance of the material, it greatly reduces properties such as impact resistance at room temperature.

Traditionally, duplex steels have a chromium content of about 22% by weight. Likewise, stainless grade 2205 is a duplex stainless steel with 22% chromium in the alloy. The higher chromium content in Duplex 2205 fittings provides several benefits, including higher yield strength, better mechanical properties, and excellent corrosion resistance.

This fitting is used in piping systems to change direction or function and is mechanically connected to the system. The easiest way to do this is to bend the pipe in the desired direction, but this process will stretch and thin the outer wall of the pipe while thickening and wrinkling the inner wall of the pipe. Our 2205 line of duplex fittings includes long radius elbows and short radius elbows.

In fact, the above properties of 317L fittings are considered to be much better than traditionally used stainless grades such as 304, 304L, 316 and 316L. The alloys used for stainless steel 317L are known to provide better resistance than 316L, especially in highly corrosive environments, which may contain chemicals such as sulfur-containing media, chlorides and other halides.

Grade UNS S31803 is termed as a duplex class due to its mixed Austenitic-ferritic microstructure. Duplex stainless steel alloys have an equal proportion of both austenite and ferrite, which is why Duplex Steel Fittings exhibit properties prominent to both classes.

These duplex accessories are supplied in various industries such as brewing tanks, boiler construction and desalination plants. We stock a full line of 2205 Duplex Fittings to meet your piping requirements.

The structure of 2205 duplex stainless steel consists of a pool of austenite surrounded by durable ferrite phases. In the toughened state, 2205 contains approximately 40-half ferrite. Duplex steels derive identical austenitic and ferritic fractions of a mixed microstructure. Ferritic alloys offer strength against stress cracking, while austenitic alloys offer ease of manufacture and rust resistance. These tubular fittings work under acid reducing and oxidizing conditions and in building materials in gas desulfurization plants.

The higher the nitrogen content, the better the corrosion resistance. 2205 fittings are highly demanded for the unique characteristics and performance they exhibit in their application. These products are manufactured and delivered in various shapes and sizes according to customer requirements. These pipes are transported to various industries including storage tanks, boiler production and desalination plants. The percentage of alloying elements used in the manufacture of fittings and duplex stainless steel pipes is lower at lower cost.

These fittings are produced from the highest quality raw materials and are well tested and inspected according to national and international standards. Manufacturers offer a full range of pipes and fittings such as UNS S32205 45 degrees. Elbow, Duplex UNS S31803 Reducer, Duplex S31803 Cap, Duplex S31803 Butt Weld Fitting, 2205 Duplex 90 Degree Elbow, Duplex S32205 Butt Weld Fitting, Duplex S32205 Fitting.