Asme B16.5 F52 Fittings Elbow Reducer Tee A105 Ansi 150 Rf Threaded Flange

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Titanium’s density is about 60% that of stainless steel and nickel alloys, this weight saving makes it a popular choice in applications where this is critical such as aerospace.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

The carbon content in the Sa182 F9 flange is lower, so the weldability of this alloy is much better. Generally, higher carbon content in alloys promotes intergranular corrosion, especially during high heat treatments such as welding.

Among many applications, products include instrumentation components for the mechanical, chemical, petroleum, watchmaking, food and beverage, and medical industries.

316L can be used in large diameter annealed condition or small cross section cold worked condition.

Monel 400 also resistant to corrosion of neutral solution, water, sea water, atmosphere and organic compounds.

C22 is typically provided in the annealed condition with a minimum yield strength of 45 ksi. However, C22 can be cold worked to higher strength levels.

Inconel 625 Material can be used as propeller blades for motor patrol gunboats, wire rope for mooring cables, submarine auxiliary propulsion motors, sheathing for undersea communication cables, submarine quick disconnect fittings, exhaust ducts for Navy utility boats, submarine transducer controls, and steam-line bellows. We have built and designed our products to meet market demands and requirements. We deliver products that are 100% durable.

This nickel alloy has good corrosion resistance, good wear resistance and high strength.

These flanges are designed to comply with International standards and specifications. Monel R405 offers about the same corrosion resistance as nickel but with higher maximum working pressures and temperatures and at a lower cost due to its superior ability to be machined.

ASME SA 479 Duplex Steel UNS S32205 Hex Bolts are commonly used in chemical processing, transportation and storage – pressure vessels, tanks, piping and heat exchangers. ASTM A479 Duplex Stainless Steel 1.4462 Bolts have excellent resistance to stress corrosion cracking, as well as excellent resistance to localized corrosion, including intergranular, pitting, and crevice corrosion.

ASTM A335 P9 pipe standards and schedules vary based on the needs of the application. A335 P9 chromium pipe composition contains 9% chromium and 1% molybdenum.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.55

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

Chromium-molybdenum alloy flanges connect pipes, valves, pumps and other equipment to form a piping system. They are ideal for applications that convey corrosive or high temperature fluids or gases.

Alloy B-2 has poor corrosion resistance to oxidizing environments, therefore, it is not recommended for use in oxidizing media or in the presence of iron or copper salts, which may cause rapid premature corrosion failure.

ASTM A213 TP 310 Pipe consists of 24% Chromium, 19% Nickel, Sulfur, Phosphorus, Silicon, Manganese and Carbon. Higher chromium and nickel content also makes it superior to 304 or 309 stainless steel. The material also has a minimum yield strength of 205 MPa and a minimum tensile strength of 520 MPa. The elongation is 40%, and the Brinell hardness of the 310 stainless steel pipe is 225HBW.

We are Manufacturers, Supplier and Exporters of Monel K500 Flanges. These Monel R405 flanges are used with stub end or daft which is butt welded to the pipe with the flange loose behind it.

A335 P91 material, we use ASTM A335 Gr P91 Welded Pipe
Heat treatment method to standardize the strength of the material. 9% chromium and 1% molybdenum make the pipe strong and corrosion resistant. The material is resistant to wear and high temperature creep. ASTM A335 P91 pipe does not deteriorate, reduces thickness, and has higher creep strength. Pipeline applications are primarily used in power generation, petrochemical, heater and reheat liners, boilers, and petroleum services.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.58

ASTM A564 Nickel 200 Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Carbon Steel A105 Grade all products like flanges, butt weld fittings, forged fittings, outlets, round bar that is Fabricated From High Quality Raw Materials. Carbon Steel A105 products are available in Following Specification, Grade and Sizes.

Alloy 32750 is a super duplex stainless steel supplied in hot worked and solution annealed conditions.

This alloy is more resistant to nickel under reducing conditions and more resistant than copper under oxidizing conditions, it does show however better resistance to reducing media than oxidizing.

This nickel alloy has excellent resistance to hydrochloric acid at all concentrations and temperatures.

N08825 Slip-On Flange N08825 Slip-On Flange are one such type of flanges that have outstanding resistance to oxidizing as well as reducing acids. They are fabricated to improve their resistance to corrosion and are clean to weld. They are resistant to chloride pitting and sensitization. Moreover, Alloy 825 Flanges also offer good mechanical features.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Alloy 31 is a nitrogen-added iron-nickel-chromium-molybdenum alloy, and we can supply alloy 31 wrought material to ASTM B637. Alloy 31 has excellent corrosion resistance in acidic and alkaline halide media; excellent resistance to sulfuric acid, even at high concentrations; excellent corrosion and erosion corrosion resistance in phosphoric acid media.

Debido a que la tuberia soldada ASTM B517 UNS N06600 es relativamente inmune a la mayoria de las soluciones salinas alcalinas y neutras, los fabricantes de tuberias Inconel 600 recomiendan estas tuberias para aplicaciones que involucran algunos ambientes corrosivos.

ASTM A694 f60 flanges are also available in different functional types such as blind flanges, reducer flanges, butt weld flanges, etc.

ASTM A194 specification covers carbon, alloy and stainless steel nuts for high pressure and/or high temperature service. American National Standard Heavy Duty Hex Series (ANSI B 18.2.2) shall be used unless otherwise specified. Nuts no more than 1 inch in nominal size shall conform to UNC Series Class 2B.

304/304L stainless steel pipe is a modern version of “18-8” stainless steel, containing approximately 18% chromium and 8% nickel, and is the most commonly specified stainless steel worldwide.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

316 stainless steel pipe bend has excellent corrosion resistance in many environments. It gives good service in atmospheric conditions, resisting most environments and is often used in marine conditions, or where industrial pollution is heavy.

C276 has good fabricability and impressive corrosion resistance in some of the most severe environments.

Inconel X750 ERW Pipes is a Chromium-Nickel alloy made from precipitation hardenable by accompaniments of Ti and Al, having creep – rupture potency at soaring …