N08800 pipe

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Titanium’s density is about 60% that of stainless steel and nickel alloys, this weight saving makes it a popular choice in applications where this is critical such as aerospace.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Another important feature of the N08800 Incoloy Alloy 800 Cold Rolled Plate is its excellent resistance to chlorine ion stress related corrosion cracking, to which the metal, like its other Inconel counterparts is virtually immune to.
Type Plate, Sheet,Strip Coil
Length 0~12m or as per your requirements
Width 0~2500mm or as per your requirements
Thickness 0.3~1200mm or as per your requirements

Inconel 600 is a nickel-chromium-iron alloy with excellent corrosion resistance, oxidation resistance and high strength at elevated temperatures. Due to its high nickel content, Inconel 600 is extremely resistant to chloride ion stress corrosion cracking. Age hardening is not required as Inconel 600 is hardened and strengthened by cold work only. The Inconel 600 can operate in temperatures as low as 700¡ãF (370¡ãC).
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Round bars are cold drawn and annealed, available in stock lengths or cut to size. Alloy round bars provide strength and corrosion resistance in a variety of environments and can be used in the frame, machine part manufacturing, food service and medical device industries.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

Carbon steel flange is a kind of rim formed at the end of the pipe when it is fixed on the pipe. It is used to seal the ends of pipes, valves or other connections. It has high tensile strength and is available with convex surfaces and supports for easy installation. It is an iron-carbon alloy containing up to 2.1 wt.% carbon. Carbon steel does not have minimum specified levels of other alloying elements, but it usually contains manganese.

UNS S32205 Duplex Steel ASME SA182 Butt Weld Flanges are suitable for seawater and power generation equipment because their smooth surfaces can withstand temperatures up to 600¡ãF, while also having excellent flow characteristics.

Hastelloy C-276 is a Ni Mo CR superalloy added with tungsten, which has excellent corrosion resistance in a wide range of harsh environments. The high content of Ni and Mo makes the Ni steel alloy particularly resistant to pitting and crevice corrosion in reducing environment, while CR transfers the performance of anti-oxidation medium.

Although molybdenum is a good element, excessive use of it may reduce the creep ductility of Gr F11 plate flanges. Graphitization and decomposition of iron carbide may occur when the temperature exceeds 500 degrees Celsius. Chromium has been added to SA A182 F11 alloy steel CL.2 forged pipe flanges to prevent creep ductility reduction and graphitization. In addition, the added chromium also provides oxidation resistance.

Duplex steel flanges are widely used in the used engineering, machinery and automotive industries. Duplex Steel S31803 Lap Flanges are ideal for applications requiring better corrosion resistance than Type 316 and good high temperature strength. We have Duplex Steel S31803 / S32205 Flanges in stock. Duplex steel flanges are commonly used in chemical, petrochemical, and power industries.

Nickel 200 is a solid solution strengthened metal. Nickel 200 Bar Stock contains 99.6% wrought nickel by weight and is considered commercially pure nickel. DIN 2.4066 Bar has good mechanical and physical properties. For example, ASTM B160 N02200 has excellent resistance to many corrosive compounds as well as corrosive environments. Meanwhile, Nickel 200 is a solid solution strengthened wrought alloy that can be designed as round bars and rods. These two components are used interchangeably and can be distinguished from certain key functions.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Flange is the parts which connects two pipe ends, flange connection is defined by the flange, gasket and bolt three are connected as a group of combined sealing structure of the detachable connection. The gasket is added between the two flanges and then fastened by bolts. Different pressure flange, thickness is different, and the bolts they use are different, when pump and valve connect with pipe, the parts of the equipment are also made of the corresponding flange shape, also known as flange connection, usually closured bolted connection parts are also known as flanges, such as the connection of ventilation pipe, this kind of parts can be called “flange type part”, but this connection is only part of a device, such as the connection between flange and water pump, it’s not inapposite to call water pump as flange type parts,but relative small valve,it can be called as flange type parts .

La tuberia Incoloy 800 es una de esas tuberias de alta resistencia que tambien es resistente a la oxidacion y la carburacion. Por lo tanto, estas tuberias se utilizan en aplicaciones donde se requiere resistencia a la corrosion y la carburacion.

Inconel 800, 800H and 800HT are nickel-iron-chromium alloys with excellent strength and good rust and carburization resistance at high temperature exposure. These types of nickel metal alloys are the same except that the 800H alloy has a higher carbon content, and about 1.20% aluminum and titanium are added to the 800HT alloy.

Nickel alloys are double certified (800H/HT) and also include two forms of properties. Incoloy 800H/HT alloy is designed for high temperature structural applications. The nickel content can make the alloy highly resistant to chloride stress corrosion cracking and embrittlement by sigma phase precipitation. Ordinary corrosion resistance is very useful. Alloys 800H and 800HT have excellent creep and stress rupture properties in the solution annealed condition.

Talking about the general properties exhibited by Incoloy 800 grades, Incoloy 800/800H/800HT pipe exhibits excellent corrosion resistance, pitting resistance in chloride environments, resistance to various acidic environments, good general corrosion resistance, flow resistance Grain alloy crack corrosion, crevice corrosion resistance and easier weldability and hardness.

Incoloy 800, 800H and 800 HT are premium alloys composed of a combination of iron, nickel and chromium that provide excellent strength and better resistance to rust and carburization to avoid exposure to extreme high temperature conditions.

For applications that require a high-strength and corrosive-resistant material, INCONEL alloy is worthy of consideration. The nickel alloy can be used in a huge range of temperatures.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Incoloy 800 Tubes are superalloys that are composed of a nickel-iron-chromium base and can resist both carbonization and oxidization in high temperature settings. Incoloy 800 Tubes are easy to fabricate, utilizing the same machines and processes as stainless steel.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Hastelloy c276 thermoforming should be done in a temperature range between 1600¡ãF and 2250¡ãF (870¡ãC and 1230¡ãC), with the heavier parts heated to a minimum temperature of 2000¡ãF prior to forming. It is recommended to anneal the material after machining and should be done at a temperature between 2050¡ãF and 2150¡ãF, followed by a rapid quench in a protective atmosphere or a stirred reduction quench bath. To obtain a reducing quench bath, add 2% (by volume) ethanol or propanol to water.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.34

Incoloy 800 is a nickel-iron-chromium alloy. The alloy’s higher creep rupture strength is a result of the aluminum, carbon, and titanium content. In addition, Incoloy 800 has good corrosion resistance in sour environments, as well as oxidation and carburization resistance in high temperature environments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19

Nickel based alloys are very useful materials for the manufacture of high quality tubing products. One of the key reasons is that they offer excellent corrosion resistance in both aqueous and high temperature applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

A benefit of using Incoloy 800 is its stability at elevated temperatures. This nickel-iron-chromium alloy can maintain its austenitic microstructure despite the Incoloy 800 Pipe being exposed to elevated temperatures. According to specification ASTM B407, these pipes are annealed for 15 minutes at a temperature of 1800¡ãF. After annealing, the Alloy 800 Seamless Pipe is cooled in air.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Inconel is a nickel and chromium alloy, it’s resistant to oxidation and is ideal for jobs with different gasses and large temperature discrepancies. Applications in the oil and gas extraction, aerospace, and medical industries would be better suited for Inconel.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

800H (NCF 800H, UNS N08810)/NAS 800T (UNS N08811) are nickel-iron-chromium alloys that provide high strength and excellent resistance to oxidation and carburization at high temperatures. High creep strength is attained through control over crystal grains¡ªvia high temperature heat treatment, together with fine control over carbon, titanium, and aluminum content. Nippon Yakin provides this product in plate, sheet, and strip forms.

Incoloy 800/800H/800HT pipes are mainly made of nickel-iron-chromium alloy, which has excellent resistance to carburization and oxidation, and has good tensile strength. These steel alloys are the same. The only difference is the percentage of aluminum and titanium in these alloys. However, if we talk about products like pipes and pipes, they are considered to be the most demanding and widely used products. Due to their exceptional properties and superior performance, these products are used in several industries and applications.

Incoloy 800/800H/800HT grade alloys have a variety of special properties and characteristics that make pipes and tubes even more demanding. As a manufacturer and supplier of such products, we ensure that all our products are manufactured according to the needs and requirements of our customers. Therefore, we use high-quality raw materials that are well tested and used according to international quality standards. With it, modern technology and the latest tools can be used to create pipes and tubes of precise size and length.

Incoloy 800H has a restricted carbon content range of 0.05 to 0.10%, which is in the upper portion of that of Incoloy 800, and is annealed at 1149 to 1177oC (Incoloy 800 is annealed at 983 to 1038oC). These differences impart it to have higher stress rupture and creep properties than Incoloy 800.

High performance nickel alloys for sour oil and gas fields. ASTM B407/B358 Incoloy 800 pipe-hardened nickel-based alloys and cold-worked solid nickel-based alloys offer many advantages, such as high strength, toughness, low magnetic permeability, and excellent corrosion resistance. ASTM B407/B358 Incoloy 800 pipe has proven to be a valuable and versatile material that can solve a variety of design and application problems. ASTM B407/B358 Incoloy 800 pipe resists low temperature aggressive corrosive environments as well as harsh high temperature environments. This alloy has excellent weldability and is able to join very successfully with other alloys with different compositions.

Incoloy 800HT seamless pipe is available up to 8″ NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Incoloy 800HT tubing is available up 3″ OD. Incoloy 800HT redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity.

Round bar ranging from 3/4″ to 6″ diameter, and light gauge sheet and plate. Incoloy 800 H material can be supplied in random lengths, cut to order or machined to customer requirements. Machining includes drilling, threading, milling, CNC shapes, turning, tapping, flanges and others.

800H can not be corroded in many kinds of media. Its high nickel content made it have good stress corrosion resistance cracking properties in the water corrosion condition. High Chromium content made it can better resist pitting and crevice corrosion cracking. This alloy can resist nitric acid and organic acid corrosion, but it is not so fine in the sulfuric acid and hydrochloric acid.