S31600 round bar

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Titanium’s density is about 60% that of stainless steel and nickel alloys, this weight saving makes it a popular choice in applications where this is critical such as aerospace.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Another important feature of the N08800 Incoloy Alloy 800 Cold Rolled Plate is its excellent resistance to chlorine ion stress related corrosion cracking, to which the metal, like its other Inconel counterparts is virtually immune to.
Type Plate, Sheet,Strip Coil
Length 0~12m or as per your requirements
Width 0~2500mm or as per your requirements
Thickness 0.3~1200mm or as per your requirements

Inconel 600 is a nickel-chromium-iron alloy with excellent corrosion resistance, oxidation resistance and high strength at elevated temperatures. Due to its high nickel content, Inconel 600 is extremely resistant to chloride ion stress corrosion cracking. Age hardening is not required as Inconel 600 is hardened and strengthened by cold work only. The Inconel 600 can operate in temperatures as low as 700¡ãF (370¡ãC).
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Round bars are cold drawn and annealed, available in stock lengths or cut to size. Alloy round bars provide strength and corrosion resistance in a variety of environments and can be used in the frame, machine part manufacturing, food service and medical device industries.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Carbon steel flange is a kind of rim formed at the end of the pipe when it is fixed on the pipe. It is used to seal the ends of pipes, valves or other connections. It has high tensile strength and is available with convex surfaces and supports for easy installation. It is an iron-carbon alloy containing up to 2.1 wt.% carbon. Carbon steel does not have minimum specified levels of other alloying elements, but it usually contains manganese.

UNS S32205 Duplex Steel ASME SA182 Butt Weld Flanges are suitable for seawater and power generation equipment because their smooth surfaces can withstand temperatures up to 600¡ãF, while also having excellent flow characteristics.

Hastelloy C-276 is a Ni Mo CR superalloy added with tungsten, which has excellent corrosion resistance in a wide range of harsh environments. The high content of Ni and Mo makes the Ni steel alloy particularly resistant to pitting and crevice corrosion in reducing environment, while CR transfers the performance of anti-oxidation medium.

Although molybdenum is a good element, excessive use of it may reduce the creep ductility of Gr F11 plate flanges. Graphitization and decomposition of iron carbide may occur when the temperature exceeds 500 degrees Celsius. Chromium has been added to SA A182 F11 alloy steel CL.2 forged pipe flanges to prevent creep ductility reduction and graphitization. In addition, the added chromium also provides oxidation resistance.

Duplex steel flanges are widely used in the used engineering, machinery and automotive industries. Duplex Steel S31803 Lap Flanges are ideal for applications requiring better corrosion resistance than Type 316 and good high temperature strength. We have Duplex Steel S31803 / S32205 Flanges in stock. Duplex steel flanges are commonly used in chemical, petrochemical, and power industries.

Nickel 200 is a solid solution strengthened metal. Nickel 200 Bar Stock contains 99.6% wrought nickel by weight and is considered commercially pure nickel. DIN 2.4066 Bar has good mechanical and physical properties. For example, ASTM B160 N02200 has excellent resistance to many corrosive compounds as well as corrosive environments. Meanwhile, Nickel 200 is a solid solution strengthened wrought alloy that can be designed as round bars and rods. These two components are used interchangeably and can be distinguished from certain key functions.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Flange is the parts which connects two pipe ends, flange connection is defined by the flange, gasket and bolt three are connected as a group of combined sealing structure of the detachable connection. The gasket is added between the two flanges and then fastened by bolts. Different pressure flange, thickness is different, and the bolts they use are different, when pump and valve connect with pipe, the parts of the equipment are also made of the corresponding flange shape, also known as flange connection, usually closured bolted connection parts are also known as flanges, such as the connection of ventilation pipe, this kind of parts can be called “flange type part”, but this connection is only part of a device, such as the connection between flange and water pump, it’s not inapposite to call water pump as flange type parts,but relative small valve,it can be called as flange type parts .

These bars are also beneficial in applications where the annealing procedure needs to be omitted after welding. Also known as WNR 1.4550 bars, these SS 347 bars are available to our valued customers in a different range of diameters, wall thicknesses and sizes at market leading prices.

316 stainless steel has a better resistance to chemicals and chlorides (like salt) than ss 304. When it comes to applications with chlorinated solutions or exposure to salt, grade 316 stainless steel is considered superior, so it is usally called marine grade stainless steel.

Grade 304 (aka 1.4301, 1.4037, 18/8, A2) Stainless Steel Round Bars
Grade 304 is the most popular stainless grade. These round bars are easily TIG, ARC and MIG welded and can also be brazed. While grade 304 is not a machinable grade of stainless steel (grade 303 is best for machining), it can be machined under the right conditions.

Stainless steel forged bars are harder and more durable. They are versatile and therefore available for a wide range of services.

Cold-drawn stainless steel bars are cold-finished, which means they are further processed after hot rolling. The hot-rolled and cold-drawn process helps improve bar dimensional tolerances, straightness, surface appearance, and overall physical properties. These SS bars are the most accurate compared to hot rolled bars. They have a smooth surface finish.

Grade 316 – Second only to 304 among austenitic stainless steels, this is the standard molybdenum-containing stainless steel, which means it has better overall corrosion resistance than 304, especially pitting and corrosion commonly found in chloride environments crevice corrosion. It has excellent forming and welding characteristics.

Grade 316L is a low carbon version of grade 316 stainless steel with increased resistance to surface corrosion and can be used in the same temperature range. It is also more commonly used in applications that require large size components to be welded. Although the 316/316L is widely considered the default choice for applications requiring marine grade products, it has reduced performance in warm salt water.

Stainless steel round bars are available in three grades. 304 is the most common grade with easy weldability, good formability and corrosion resistance. Grade 316 offers excellent corrosion resistance, making it ideal for harsh environments such as salt water or heavy industrial areas. Like grade 304, it is also easy to weld, but more difficult to machine. Finally, grade 303 is easier to machine, drill and cut than other grades. However, it is not as suitable for welding as grades 304 and 316.

Stainless steel round bars can be easily ordered in various sizes. Simply select the desired steel grade and we will supply bars in lengths from 500mm to 3m and diameters from 3mm to 50mm. We can even offer you an ordering option for metric or imperial measurements.

Stainless steel 316 round bar is a product made of stainless steel. Different industries use different grades of stainless steel. Stainless steel rods are used for their strength and corrosion resistance.

This stainless steel round bar is an age-hardening martensitic stainless steel that combines high strength with the corrosion resistance of stainless steel. Hardening is achieved by a short, simple low temperature treatment. Unlike conventional martensitic stainless steels.

This stainless steel round bar is very weldable. Strength, corrosion resistance and simplified manufacturing can make it a cost-effective alternative to high strength carbon steel and other stainless steel grades.

Stainless Steel 316 or 316L SS is a chromium-nickel stainless steel with the addition of molybdenum for improved corrosion resistance and mechanical properties. It is non-magnetic in the annealed state and cannot be hardened by heat treatment.

F55 is the common industry name for UNS S32760 stainless steel. Industry uses ASTM A276 F55 Duplex Round Bar because of its high mechanical strength and resistance to pitting and crevice corrosion. It is available in thicknesses from 3 to 12 mm and in ISO tolerance classes h11, h11-DIN 1013. It is a ductile product and can therefore be used in railway engines and passenger cars.

The benefits of using stainless steel 304/304L round bars include low carbon content, which eliminates carbon precipitation during welding. Stainless steel 304L round bars have higher tensile yield strength and have low temperature properties that respond well to cold work hardening.

A round bar is a cylindrical metal rod with a radius of 5 mm to 450 mm and a length of 2 to 6 meters. Bars and bars are also available in hexagonal and square shapes. One of them is UNS S32760 round bar, equivalent to Werkstoff NR 1.4410. It has a diameter of 10 to 100 mm, an ultimate tensile strength of 750 ksi and a minimum stress of 550 N/mm2.

F55 round steel is produced by a combination of rolling and forging. They are used for application flame hardening where the surface hardness needs to meet the general standard of ASTM A182 F55. Another bar standard, UNS S32760 F55 Rods, has a high fatigue strength of 450 MPa and a modulus of elasticity of 200 GPa.

ASTM A479 round bars are included in the specification, including cold-worked stainless steel bars and hot-worked stainless steel bars. These include extruded profiles as well as hot rolled profiles such as channels, tees and angles. These A403 WP310s A403 WP347 A403 S30409 round bars are made of stainless steel, which means they are corrosion resistant. This also means that they are resistant to alkaline solutions, chlorine-containing environments, and acidic environments. Therefore, A403 WP316l A403 WP904l A403 S31703 round bars are used for grills, machining, construction, fasteners, etc.

316 Stainless Steel Rod Applications: Pumps, Valves, Textile and Chemical Equipment, Pulp and Paper, and Marine Applications.

Any modification of the stainless steel bar surface will expose the underlying steel and corrosion may occur. Corrosion of different grades of stainless steel will vary depending on the environment. The appropriate rating will depend on the service environment. Even trace amounts of certain elements can significantly alter corrosion resistance. In particular, chlorides can adversely affect the corrosion resistance of stainless steel. Grades high in chromium, molybdenum and nickel are the most corrosion resistant.

Due to the molybdenum content in 316 stainless steel, this stainless steel material has excellent corrosion and heat resistance. It is resistant to various corrosive agents such as sulfuric acid, bromide, iodide and chloride, making it suitable for use in marine environments.

Certain types of equipment, such as medical machinery, are very sensitive to even low levels of magnetism, so it is important to source the correct type of stainless steel bar and bar for these critical environments. So 304, 304l, 316, 316l and 347 are excellent choices.

Industrial stainless steel bar products include several different shapes including flat, hexagonal, round and square and materials such as 304, 304l, 316, 316l and 347. These types of stainless steel bar products have enhanced corrosion resistance and are available in a variety of alloys and finishes, making them useful in an almost unlimited number of industrial applications.

Stainless steel round bars 3mm to 90mm cold drawn and polished, larger diameter peeled and polished. Stainless steel round bars are ordered according to ISO H9 (H tolerance is negative). European Steel Stock Stainless Steel Round Bars are available in the following grades 303, 304, 316, 431 EN 57, 904L Other grades available on request. The length is random and varies between 4 and 6 meters. We offer a full cut service so we can provide the exact size and length you need.

Generally, extruded stainless steel flat bars and stainless steel angles are hot rolled, annealed and pickled. Dimensional tolerances conform to ASTM A484/A484 M-06. Euro Steel stocks stainless steel flat bars and stainless steel angles in 6m lengths in grades 304L, 316 L, other grades available on request.

As a stainless steel bar grade supplier, HT PIPE offers bar products and services. Stainless steel is not a single material, but a name for a family of corrosion-resistant steels. Like many scientific discoveries, the origin of stainless steel was an accident. In 1913, Sheffield, England, Harry Brearley was working on the development of a new steel alloy for gun barrels. He noticed that some of his samples did not rust and were difficult to etch. These alloys contain approximately 13% chromium. The first application of these steels was in cutlery, for which Sheffield subsequently became famous. Concurrent work in France led to the development of the first austenitic stainless steels.

The advantageous properties of stainless steel can be seen compared to standard plain carbon low carbon steels, like 304, 304l, 316, 316l and 347. Although stainless steel has a wide range of properties, in general, compared to mild steel, stainless steel has: higher corrosion resistance, higher low temperature toughness, higher work hardening rate, higher hot strength, more High ductility, higher strength and hardness, more attractive appearance and low maintenance.

All stainless steels are iron-based alloys containing at least about 10.5% chromium. The chromium in the alloy forms a self-healing protective transparent oxide layer. This oxide layer makes stainless steel corrosion resistant. The self-healing nature of the oxide layer means that corrosion resistance remains the same regardless of the manufacturing method. Even if the surface of the material is cut or damaged, it will heal itself and remain corrosion resistant. Conversely, plain carbon steel can be protected from corrosion by painting or other coatings such as galvanizing.

Characteristics of 316 round bar: This grade of stainless steel bar is more resistant to corrosion and pitting than 304 and provides higher strength at elevated temperatures. Additionally, 316L is an ultra-low carbon variant that helps avoid carbide precipitation from welding